WEEFINE WFH05-06 Smart Housing User Manual
- June 14, 2024
- WEEFINE
Table of Contents
WEEFINE WFH05-06 Smart Housing
Specifications
- Model: WFH05/06 2023
- Compatibility: Fits many smart phones with iOS and Android operating system
- Features: Front Case Lens Window, Lanyard Hole Lock System, Vacuum detection port, Lens holder mounting hole, Shutter, Depth Detector, Tripod Mount, Window, MF/AF Mode, MENU/OK, DOWN, UP buttons
- Power Source: AAA Battery (2 pcs)
Product Usage Instructions
Opening and Closing Weefine Smart Housing
To open:
- Push out the safety lock.
- Turn the Lock Plate clockwise.
To close:
Turn the Lock Plate counterclockwise to its original position. Make sure
that the safety lock has been returned to the locked position (device is
securely locked when you hear a click).
Warning
Make sure that the safety lock has been returned to the locked position.
(Device is securely locked when you hear a “click”)
Installation of the Lens Holder
Note: The lens holder needs to be purchased separately. Please contact
your local distributor if needed.
Follow the diagram provided to install the lens holder. As the diagram shows
below.
(Lens holder）
Note: The lens holder needs to be purchased seperately. Please contact
your local distributor if needed.
Installing the Batteries
Open the battery compartment.
Install the AAA batteries, ensuring the positive and negative poles of the
batteries align with the corresponding poles in the housing.
- Install the AAA battery as shown in the diagram “d”below.
- Indicator light solid green – Bluetooth connection successful, full battery power；
- Indicator light flashes green – Bluetooth NOT connected, full battery power；
- Indicator light solid red – Bluetooth connection successful, low battery power；
- Indicator light flashes red – Bluetooth NOT connected, low battery power.
Warning!
The polarity of the battery must match the polarity of the contacts in the
housing – ensure the positive and negative poles of the batteries align with
the positive and negative poles of the housing.
Installing your Phone
- Ensure that Bluetooth is On in your device, and connect to the “Weefine Housing” app. Select “WEEFINE” on the screen.
- Insert your phone in the housing as shown i.
- Close housing, swtich Safety Lock counterclockwise until a “click” is heard.
Warning!
Many phones automatically adjust the screen brightness. To ensure optimal use
of the housing, turn off this setting before inserting your phone in the
housing.
Using the Vacuum System
The built-in vacuum system ensures the housing is sealed before diving.
Follow these steps:
-
Turn the exhaust valve waterproof cover counterclockwise to open.
Ensure the O-rings are clean and free from dirt, sand, hair, or dust.
-
Press the pump nozzle at the exhaust valve interface and start manual pumping .
Warning
After pumping is completed, please make sure to tighten the waterproof cover of the exhaust valve. -
Vacuum indicator light will flash red and green as you are pumping. When successfully sealed, the indicator light will turn solid green.
-
Once the exhaust valve waterproof cover is tightened, put the waterproof shell on the land for 30 minutes before the water leakage detection indicator lights up green, then it is safe to use in water.
Warning!
If the indicator is red or red to green cycle, the housing is not sealed, please re-check the vacuum system again.
Ensure the indicator is green before diving.
-
To release the vacuum seal, unscrew the exhaust valve waterproof cover and press the yellow gasket to the side.
Warning!
You must release the vacuum seal before attempting to open the housing. The indicator light will turn red when the housing is safe to open. -
Trigger the air valve to release pressure until the internal negative pressure of the housing is eliminated, achieving the balance of air pressure inside and outside the housing.
(The pressure relief must be made before the waterproof cap is opened).
FAQ
What smartphones are compatible with Weefine Smart Housing?
Weefine Smart Housing is compatible with many smart phones with iOS and
Android operating system. If your phone fits, it will work!
How do I know if the housing is sealed before diving?
The built-in vacuum system lets you know if the housing is sealed. Follow
the instructions provided in the user manual to use the vacuum system.
Can I use the housing without the depth detector?
Yes, the Smart Housing Pro (WFH05) comes with a built-in depth detector,
while the Smart Housing (WFH06) does not have this feature.
Features
Shutter Button:
- Turn on the device.
- Photo mode – capture a photo.
- Menu mode – exit menu.
- Video mode – start and stop recording
MODE Button:
-
Switch modes:
Photo → Video recording → Replay -
Menu Mode – exit to the previous shooting mode.
MF/AF Button:
- Toggles between Manual Focus → Auto Focus
MENU/OK Button:
- Press and hold to turn off the device.
- Enter menu/setting screen.
- Switch between Image Setting → System Setting
- Up/Down buttons will navigate through menu
UP Button:
- Switch between full screen display → split screen display.
Down Button:
- Press the button to enter filter mode.
- Enter the new menu in the menu mode.
Overview
Weefine Smart Housing is a versatile housing that will fit many smart phones,
including of iOS and Android operating system. If your phone fits, it will
work! Simply ensure that Bluetooth is turned on in your device, connect to the
Weefine Smart Housing app and put the phone into the housing! Confirm that the
housing is protected by using the vacuum sealing system.
Enjoy diving!
With built-in depth detector Smart Housing Pro(WFH05) Without depth detector
Smart Housing(WFH06)
Package
Turn ON/OFF WEEFINE Smart Housing
- Turn on the device, as shown .
MENU/OK Button:
- Press and hold to turn off the device, as shown in diagram“i1”.
General Warnings and Instructions
- Do not take apart the WEEFINE Smart Housing.
- Do not leave the WEEFINE Smart Housing exposed to a heat source or store in high temperatures. (e.g., in a locked car parked in the sun)
- Remove the battery if the WEEFINE Smart Housing will not be used for long periods of time. (e,g., between dive trips)
- To avoid leaks, the O-rings should be checked to ensure that they are free from any dirt, sand, hair and dust every time before use the WEEFINE Smart Housing. Use a soft cloth to clean the O-rings if required. The O-rings should also be carefully checked for cracks or blemishes. Gently and evenly apply a thin coat of grease to the entire O-rings regularly to prolong O-ring life. Be careful not to scratch the O-rings surface. If cracks or blemishes occur, the rings should be replaced immediately.
- Do not open the WEEFINE Smart Housing in the water.
- Wash the exterior of the WEEFINE Smart Housing thoroughly with clean fresh water immediately after use. Soaking the housing in fresh water will help to remove salt deposits prior to storage.
- Please ensure the housing is dry before opening. Allowing water to come in contact with the internal device may cause damage to the device.
- Do not disassemble, modify, remanufacture, puncture or damage the WEEFINE Smart Housing.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>