IMI Hydronic Engineering TA-Slider 750 IMI TA Actuator Instruction Manual
- June 4, 2024
- IMI Hydronic Engineering
Table of Contents
IMI Hydronic Engineering TA-Slider 750 IMI TA Actuator
Quick start
LED
TA-Slider 750/1250 Plus
- 0°C – +50°C 32°F – +122°F (5-95%RH, non-condensing)
- 0°C – +120°C 32°F – +248°F
- -20°C – +70°C -4°F – +158°F (5-95%RH, non-condensing)
- Input signal: 0-10 VDC
- Output signal: 0-10 VDC
- Speed: 3 s/mm (3, 4, 6, 8, 12 or 16 s/mm)
- 76.2 s/in (76.2, 101.6, 152.4, 203.2, 304.8 or 406.4 s/in)
- Characteristic: Linear
TA-Slider 750/1250
TA-Slider 750/1250 Plus
- Protection class I: H05VV-F or similar
- Protection class III: LiYY or similar
- Wire cross-section: 0.25-2.0 mm2
- (30 AWG-14 AWG)
- L = 100 mm (3.94 in.)
- Grouding wire L = 120 mm (4.72 in.)
100-240 V
24 V
Relay (TA-Slider 750/1250 Plus)
BUS (TA-Slider 750/1250 Plus)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>