ASUS ZenWiFi AC Wireless Band Gigabit Router User Guide

Quick
Start Guide
ASUS ZenWiFi AC
Wireless AC3000 Tri-Band Gigabit Router
Model: CT8

Hardware Explanations

1. Plug the adapter into the DCIN port, and press the Power On/Off button.
2. The power LED will light up when the hardware is ready.

ZenWiFi AC Overview

WAN port
Connect your modem to this port with a network cable.

LAN ports 1-3
Connect your PC to a LAN port with a network cable.

Specifications:

Before Setup

Setting up a standalone router

Go to ONE ROUTER SETUP STEPS.
Setting up an AiMesh WiFi system

1. Prepare two or more ASUS routers supporting AiMesh.

2. Assign one as an AiMesh router, and another one as an AiMesh node.
   ” If you have multiple AiMesh routers, we recommend using the router with the highest specifications as your AiMesh router and the others as AiMesh nodes.

3. Go to AiMesh SETUP STEPS.

One Router Setup Steps WE SUGGEST…

Prepare your Modem

1. Unplug the power of the cable / DSL modem. If it has a battery backup. remove the battery.
   

2. Connect your modem to the router with the network cable provided.

3. Power on the modem. Plug modem to the power outlet and power on
   

Check the modem LED lights to ensure the connection is active.

Connect your Device

1. Power on the router.
   Plugin and press the Power On/ Off button at the back of your router.

2. Check that the LED turns solid blue to indicate that the hardware connection is ready for setup.

3. [ Web ] Connect your PC to the router using an additional network cable.
   [App ] Or you can use a phone or pad to complete the setup via ASUS Router App.

Login and Connect

1. [Web] Open a web browser.
   You will be redirected to the ASUS Setup Wizard. If not, navigate  to http://router.asus.com
   
   [App] Launch Launch ASUS Router App and follow the instructions to complete the setup.

AiMesh Setup Steps

Prepare
Place your ZenWiFi AC router and node within 3 meters of each other during the setup process.
AiMesh node
Keep your AiMesh node powered on and standby for AiMesh system settings.

AiMesh router

1. [Web] Refer to ONE ROUTER SETUP STEPS to connect your AiMesh router to your PC and modem and then log in To the web GUI.

2. Go to the Network Map page, click the AiMesh icon and then Search for your extending AiMesh node.
   

3. Click Search , it will automatically search for your AiMesh node nearby. When the AiMesh node shows on this page, click it to add it to the AiMesh system.
   *If you cannot find any AiMesh node, please go to TROUBLESHOOTING.
   

4. A message is displayed when synchronization is completed.

5. Congratulations! You will find the pages below show up when an AiMesh node has been successfully added to the AiMesh network.

[ App ] Log in to your existing router via ASUS Router App and choose “Add AiMesh Node” to complete the setup.

Troubleshooting

If your AiMesh router cannot find any AiMesh node nearby or synchronization fails, please check the following and try again.
a. Move your AiMesh node closer to the AiMesh router ideally. Ensure that it is within 3 meters.
b. Your AiMesh node is powered on.

ASUS Router App

Download the free ASUS Router APP to set up and manage your router(s).

https://play.google.com/store/apps/details?id=com.asus.aihome&hl=en
http://itunes.apple.com/app/asus-router/id1033794044

Relocation THE BEST PERFORMANCE

Locate the AiMesh router and node at the best place.

NOTES: To minimize interference, keep the routers away from devices like cordless phones, Bluetooth devices, and microwave ovens.
We recommend that you place the routers in an open or spacious location.

ZenWiFi AC LED indications

Solid white: Good signal

Solid yellow: Weak signal

Solid red: No signal

FAQ FREQUENTLY ASKED QUESTIONS

Ql. Does the AiMesh router support Access Point mode?
A: Yes. You can choose to set the AiMesh router as router mode or access point mode. Please go to web GUI (http://router.asus.com) and go to the page Administration > Operation Mode.

Q2:
Could I set up a wired connection between AiMesh routers (Ethernet backhaul)?

A: Yes. The AiMesh system supports both wireless and wired connections between the AiMesh router and node to maximize throughput and stability. AiMesh analyzes the wireless signal strength for each frequency band available and then determines automatically whether a wireless or wired connection is best to serve as the inter-router connection backbone.

1. Follow the setup steps to establish a connection between the AiMesh router and node via WiFi first.

2. Place the node in the ideal locations for the best coverage. Run an Ethernet cable from the LAN port of the AiMesh router to the WAN port of the AiMesh node.
   

3. AiMesh system will auto-select the best path for data transmission, whether wired or wireless.

ASUS Recycling/Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components, as well as packaging materials. Please go to httn://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.

REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products on the ASUS REACH website at http: //csr.asus.com/english/REACH.htm

Federal Communications Commission Statement
This device complies with Pan 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Prohibition of Co-location
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

IMPORTANT NOTE:
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End-users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC exposure compliance requirements, please follow operation instructions as documented in this manual.

WARNING! This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 24 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

Compliance Statement of Innovation, Science and Economic Development Canada (ISED)
This device complies with Innovation, Science, and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. CAN ICES-3(B)/NMB-3(B)

Radio Frequency (RF) Exposure Information
The radiated output power of the ASUS Wireless Device is below the Innovation, Science, and Economic Development Canada radio frequency exposure limits. The ASUS Wireless Device should be used in such a manner that the potential for human contact during normal operation is minimized. This equipment should be installed and operated with a minimum distance of 28 cm between the radiator any part of your body. This device has been certified for use in Canada. Status of the listing in the Innovation, Science and Economic Development Canada’s REL (Radio Equipment List) can be found at the following web address: http://www.ic.gc.ca/eicisite/ceb- bhst.nsf/eng/htt00020.html Additional Canadian information on RF exposure also can be found at the following web: https://www.ic.gc.ca/eic/site/smt- gst.nsf/eng/sf08792.html

Safety Notices

• Use this product in environments with ambient temperatures between 0°C(32°F) and 40°C(104°F).
• Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating.
• DO NOT place on uneven or unstable work surfaces. Seek to service if the casing has been damaged.
• DO NOT place or drop objects on top and do not shove any foreign objects into the product.
• DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.
• DO NOT cover the vents on the product to prevent the system from getting overheated.
• DO NOT use damaged power cords, accessories, or other peripherals.
• If the Adapter is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
• To prevent electrical shock hazards, disconnect the power cable from the electrical outlet before relocating the
• DO NOT mount this equipment higher than 2 meters.

ASUSTeK Computer Inc.
Tel: +886-2-2894-3447
Address: 4F, No. 150, LI-TE RD., POITOU, TAIPEI 112, TAIWAN
TE RD., PEITOU, TAIPEI 112, TAIWAN

References

• Radio equipment list (REL)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>