PHILIPS BA Series Dome Functional Pendants User Manual
- October 30, 2023
- Philips
Table of Contents
PHILIPS BA Series Dome Functional Pendants
Surface mounted (BA S)
Track mounted (BA T)
Lumen package
| | Pmax (W) ±10%| Drivers| Beam angle availability|
---|---|---|---|---|---
10S
| 82 7/ 830/ 8 40/ PW9 30 / PW9 40| 10 .0| PSU/PSD| MB, WB, VWB, WR, DF|
Without Inner Shade: BA: 1.7
| 82 7/830/840/Frost/CH| 18.9
PW930/PW940| 22.4
17S
| PC930| 23.9
BAT
BAS
| | ROSE| 26.7|
MB, WB, VWB
FMT| 22.9| With Inner Shade: BA: 2.2
82 7/830/840/Frost/CH| 23.7| MB, WB, VWB, WR, DF
22S| PW930/PW940| 28.3
| PC930| 30.0
27S| 82 7/830/840/Frost/CH| 29.2
PW930/PW940| 32.3
Surface-mounted
Inrush current
| 10S| 10S| 17S, 22S, 27S| 17S, 22S , 27S
---|---|---|---|---
PSU| PSD| PSU| PSD
20 W mini| 20 W mini| 36 W mini| 36 W mini
lmax (A)| 4.4| 18| 4.6| 18
Tref (µs)| 66| 250| 65| 250
MCB| |
Max. luminaires
B-10 A| 21| 21| 21| 21
B – 13 A| 27| 27| 27| 27
B-16 A| 34| 34| 34| 34
C- 10 A| 35| 35| 35| 35
C- 13 A| 45| 45| 45| 45
C- 16 A| 57| 57| 57| 57
Mounting Instructions
Track version assemble
GLOBAL Trac connecting diagrams
This product is designed for GLOBAL Trac.
Please contact relevant product specialist for compatibility with other track
types.
A GLOBAL Trac Pro PSU GA69 230V, 6A
Choose the phase (1,2 or 3) before fastening
Track version disassemble
Never shift the luminaire while light is on.
- The luminaire shall be installed by a qualified electrician and wired in accordance with the latest IEE electrical regulations or the national requirements.
- This luminaire is not suitable for use as emergency lighting.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- Clean with dry cloth.
| ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE
DEVICES
---|---
Disconnect before servicing
Luminaire has basic insulation between Low Voltage supply and control conductors.
The control gear and/or the external flexible cable contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person. The light source contained in this luminaire is not replaceable, in case of damage replace the luminaire.
Storage, installation, use, operation and maintenance of the products needs to be performed exactly according the instructions in this manual and/or other instructions as may be provided by us to guarantee safe use of the product over its entire lifetime. Failure to adhere to these instructions will invalidate your entitlement to warranty. Bolts with indication of torque strength on the drawing need to be tightened using a calibrated torque wrench. Pre-assembled bolts need to be retightened again to the required torque specification to assure maximum strength over lifetime.
This product contains a light source of energy efficiency class: see table or label.
Disposal of the product
This product is made of high quality materials and components that can be recycled and reused. If a product is marked with the crossed-out circular garbage can symbol shown here, it means that it is subject to the European Directive 2012/19/EU. You should check the information about local facilities collecting used electrical and electronic products and their packaging on your own. Local regulations prohibiting the discarding of equipment and packaging together with municipal waste must be strictly observed. Proper disposal of used packaging and product will help to avoid potential harmful effects on the environment and human health.
Features
Customer Support
2023-05-16
4422 944 10111
© 2023 Signify Holding. All rights reserved
Data subject to change without notice
Keep for future reference: https://pro.mycreation.lighting.philips.com/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>