Thermaltake Core X71 Tempered Glass Tower Box User Manual

Thermaltake Core X71 Tempered Glass Tower Box

Join Tt Community To Receive Benefits

Dear Valued Customer,
Thank you for choosing Thermaltake. As new user, we value your thoughts and opinions and your feedback is important to us. We at Thermaltake would like to use this opportunity to invite you to join our Community Forums. Register today to start enjoying the full benefits of our community.
Benefits of being a member:

• Quick and responsive user support
• Receive help and advice with new builds
• Keep up to date with new product releases
• Share your thoughts and builds with the community
• Enter monthly contests and giveaways

Tt LCS-Liquid Cooling Support Certification

Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment.
Brand official website
http://www.thermaltake.com/
Global Facebook
https://www.facebook.com/ThermaltakeInc
Taiwan Facebook
http://www.facebook.com/ThermaltakeTW
Global community forums
http://community.thermaltake.com

Specification

Accessory

Warning and Notice

Warning!!
CPU Cooler Height Limitation: Please ensure that your CPU cooler does NOT exceed 180mm (7.1 inches) height.
VGA (Add-on card) Length Limitation: Please ensure that your VGA (Add-on card) does NOT exceed 278mm (10.9 inches) length.

Side Panels Disassembly

Remove the screws on the back of the chassis, and open the side panel.

Power Supply Unit (PSU) Installation

Position A

Place the PSU in proper location.

Position B

Motherboard Installation

1. Lay down the chassis.
2. Install the motherboard in proper location and secure it with screws.

5.25″ Device Installation

1. Remove the 5.25” drive bay cover.
2. Slide the 5.25” device into the drive bay to lock the device.
   Note: Press the 5.25” tool-free mechanism to unlock the device.

3.5″ & 2.5″ HDD Installation

1. Pull the HDD tray out.
2. Place the 2.5” or 3.5” hard drive on the tray and secure it with screws.
3. Slide the HDD tray back to the HDD cage.

PCI Card Installation Insert the PCI card into the PCI slot, and secure it with screw.

Keyboard & Mouse Security Lock Usage

Place the keyboard or mouse cables through the “Keyboard & Mouse Security Lock” then secure it back to the back panel from inside of the chassis with screw.

Air Cooling Installation

Liquid Cooling Installation

Maximum Radiator Installation Notice

Top Radiator Installation Notice

• Please consult radiator & memory height for proper installation

Filter Installation

Leads Installation

Leads Installation Guide
Case LED Connection / On the front of the case, you can find some LEDs and switch leads. Please consult the user manual of your motherboard manufacturer, then connect these leads to the panel header on the motherboard.
USB 2.0 Connection / Please consult your motherboard manual to find out the section of “USB connection”.
USB 3.0 connection /

1. Make sure your motherboard supports USB 3.0 connection.
2. Connect the USB 3.0 cable to the available USB 3.0 port on your computer.

Audio Connection / Please refer to the following illustration of Audio connector and your motherboard user manual. Please select the motherboard which used AC’97 or HD Audio(Azalia),(be aware of that your audio supports AC’97 or HD Audio (Azalia)) or it will damage your device(s).

References

• Forums - Tt Community
• Thermaltake

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>