VIVO MOUNT-E-UP80D Motorized Large TV Stand Instruction Manual
- June 14, 2024
- Vivo
Table of Contents
Motorized TV Stand with Remote Control
Instruction Manual SKU: MOUNT-E-UP80D
MOUNT-E-UP80D Motorized Large TV Stand
https://vivo-us.com/products/mount-e-up80d
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product.
https://vivo-us.com/products/mount-e-up80d
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this
product for any purpose that is not explicitly specified in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by
improper mounting, incorrect assembly or inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT
TIPOVER:
- NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND.
- USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
TOOLS NEEDED
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
PRE-ASSEMBLY
When fabricating custom cabinetry for your motorized TV mount, ensure there
will be at least 50mm (2”) of clearance on the sides and front of the TV along
with at least 10mm (3/8”) of clearance on the top.
PLEASE NOTE:
This product is designed for CUSTOM CABINETS ONLY and can NOT be installed as
a ceiling mount. Doing so will damage the motor and void the warranty. 
ASSEMBLY STEPS
STEP 1
Connect cable from Motorized Lift (A) to Control Unit (G).
STEP 2
Place AC Adapter Cover (I) over AC Adapter (H). Connect Control Unit (G) cable
and Power Cable (J) to AC Adapter (H). 
STEP 3
Slide Mounting Plate (B) onto Motorized Lift (A) and secure using M6x12mm
Screws (S-C) and 4mm Allen Wrench (T-A) . Connect Shelf Supports (C) to the
sides of Motorized Lift (A) using M6x12mm Screws (S-C) and 4mm Allen Wrench
(T-A). Attach Shelf (D) to top of Shelf Supports (C) using M6x12mm Screws
(S-C) and 4mm Allen Wrench (T-A). 
STEP 4
Place the lift assembly inside of your custom cabinetry and plug into nearby
outlet.
Press the side button on Control Unit (G) using a pencil or small tool. The
lift will beep once, indicating the lift is ready to be paired with the Remote
(K).
Press the button on the remote.
Remote will beep for 10 seconds, and then emit one final beep to indicate
successful paring. Press the arrow to raise the lift. 
STEP 5
Secure lift assembly to inside of cabinet by installing ST5.5x16mm Screws
(S-A) into the tabs on lift using a drill. Secure Control Unit (G) and AC
Adapter with Cover (H, I) using ST4.2x20mm Screws (S-B) and ST5.5x16mm Screws
(S-A) and a drill. 
STEP 6
Attach TV Bracket (E) to Mounting Plate (B) using M10x20mm Screws (S-D), M10
Nuts (S-E), 6mm
Allen Wrench (T-B), and 17mm Wrench (T-C). 
Secure custom
cabinet cutout to Shelf (D) using ST5.5x16mm Screws (S-A) and a drill. 
STEP 7
Install VESA Brackets (F) to TV using appropriate Screws (M-A, M-B, M-C, M-D),
M8 Washers (M-E), Spacers (M-F, M-G) and a Phillips screwdriver. 
STEP 8
Place TV with VESA Brackets (F) onto TV Bracket (E). Tighten set screw on VESA
Brackets (F) with Phillips screwdriver to secure.
STEP 9
Motorized lift is now ready for use.
Love your new VIVO
setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 10/17/2023
REV1
v1.0
Open Monday – Friday 7:00am – 7:00pm
CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
help@vivo-us.com
AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Motorized TV Stand for 37" to 77" TVs – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>