STAGE Solo Mini Sound Bar User Guide

STAGE Solo Mini Sound Bar

DIAGRAM

1. RGB Light
2. Multi-function Button
3. AUX Analog Audio In (3.5mm Stereo)
4. 3.5mm Headphone Port
5. USB Cable
6. 3.5mm AUX Cable

SPECIFICATION

• Connection Bluetooth & 3.5mm Audio Plug & USB-A Plug
• Power Supply USB-A Plug(Not Built in Battery)
• Power Input 5V=2A Max
• Frequency S0Hz -20KHz
• SNR ;,94dB
• Net Weight 773g I 27.27 Oz
• Dimensions 16×2.9x 3.1 (LxHxW) Inch

FCC STATEMENT

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

ONE-BUTTON CONTROL

• Power On/Off: Long press for 2 seconds
• Play/Pause, Mute: Press once
• Switch Connection Mode: Press twice
• Switch RGB Lighting: Press three times
• Reset: Press six times
• Raise the Volume: Rotate clockwise
• Lower the Volume: Rotate anticlockwise

CONNECTION

1. There are 3 connection modes: USB Audio Mode, Bluetooth Mode, AUX Mode.

2. USB Audio Mode only works when connect the USB cable to the host computer or laptop.

3. The sound bar supports 3.5mm headphones, it’s not built with microphone.

4. When connect the sound bar with the PC, the USB cable can supply power and play audio at the same time. No AUX cable is required, so as to avoid signal interference.
   LIGHTING:

5. There are 4 lighting modes in order: Rhythm, Flow, Single, Off. (Choose the Off mode to turn off the light completely)

6. The lighting mode will be saved to the next time you use it.
   NOTE:

7. In Bluetooth mode and USB audio mode, you can press once on the button to play/pause the audio, while in AUX mode, you can mute the audio.

8. We follow a global energy saving philosophy. If there is no signal connection or no playback for 20 minutes, the sound bar will power off automatically, please power it on manually.

For more latest products, please visit:www.coolmetech.com
For any assistance, please Email us:service@coolmetech.com
Made in China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>