Stage Lights 60 LED Par Lights User Manual

Stage Lights 60 LED Par Lights

Digital Display– 4 Setting button

Instructions for use:

After plugging in and using, the screen will display “D001”, which means it is in “DMX mode”(For operating instructions, please see Section “2. Console control”). Press the “Menu”  button to switch the mode.

Button description:

• The first “MENU” is the switch mode button: Press it to switch the light mode.
• The second and third “UP/DOWN” are up/down value buttons: Adjust the strobe speed of the light (The larger the value, the faster the change) and the brightness of the light color (The higher the value, the brighter the light) , etc.
• The fourth “ENTER” is the save button: Before shutting down, press “ENTER” to keep the light mode you set. Plug it in again and play the previous mode automatically.

Combining the above, after understanding the “MENU, UP, DOWN, ENTER” buttons, you can easily understand the data table:

※About “DMX MODE” in the table: For operating instructions, please see Section “2. Consolecontrol”.

※Master-slave Mode Setting

1. Connect the lights with DMX cable(Note: DMX cable no include)

2. After connection, two usage situations:

   • (1) After connection, without using the console:
     The main light is set to any mode (Do not “D001” mode); press the “MENU” button to display the “D001” mode on the other lights.

   • (2)After connection, using the console:
     Press the “MENU” button to display the “D001” mode on all the led par lights.
     ( Note: the “MENU” is the setting button on the back of the stage light)

Console Control

If you want to use console control, please use DMX cable to connect stage light (Note: console and DMX cable are not included). The usage instructions are as follows:

4CH| Channel value| D001des c ribe| 8CH| Channel valu e| A001des c ribe
---|---|---|---|---|---
CH1| 0| R Close| CH1| 0-255| Total dirmning
1-255| R open| CH2| 0| R Close
CH2| 0| G Close| 1-255| R open
1- 255| G open| CH3| 0| G Close
CH 3| 0| B Close| 1-255| Gopen
1-255| B open| CH4| 0| B Close
CH4| 0| W Close| 1-255| B open
1-255| W open| CH5| 0| WC lose
| | | 1-255| W open
| | | CH6| 0-255| Stroboscope slow to fast
| | | CH7| 0-50| open DMX
| | | 51-100| Program color selection
| | | 101-150| Turno
| | | 151-200| Gradual change
| | | 201-250| Pul se change
| | | 251-255| Voice control
| | | CH8| 0- 255| Speed (col or. voice)

Remote Control

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>