ITALIAN STAGE IS SPX12AUB Professional Multimedia Loudspeaker System User Manual

: June 5, 2024
: ITALIAN STAGE

Table of Contents

ITALIAN STAGE IS SPX12AUB Professional Multimedia Loudspeaker
PRECAUTIONS
GETTING STARTED
CONTROL PANEL
REMOTE CONTROL
CONFIGURATIONS
SPECIFICHE TECNICHE TECHNICAL SPECIFICATIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ITALIAN STAGE IS SPX12AUB Professional Multimedia Loudspeaker

PRECAUTIONS

Please read carefully before proceeding

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire, or other hazards. These precautions include, but are not limited to, the following

Power supply/power cord (devices with power cords/power supplies)

Only use the voltage specified as correct for the device. The required voltage is printed on the type plate of the device. Check the power cable from time to time regarding dirt, damage, or other influence.
Use only the included power cord/power supply or adaptor. Do not place the power chord near heat sources such as heaters or radiators, and do not excessively bend or otherwise damage the cord, place heavy objects on it, or place it in a position where anyone could walk on, trip over, or roll anything over it.
Remove the electric plug from the outlet when the device is not to be used for extended periods of time, or during electrical storms. When removing the electric plug from the device or an outlet, always hold the plug itself and not the cord. Pulling by the cord can damage it.
To avoid generating unwanted noise, make sure there is an adequate distance (50 cm or more) between the AC power adaptor and the device. Do not cover or wrap the AC power adaptor with a cloth or blanket.

Location

When setting up the device, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet.
When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet.
Inadequate ventilation can result in overheating, possibly causing damage to the device(s), or even fire.
Do not expose the device to excessive dust or vibrations, or extreme cold or heat (such as: in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of panel disfiguration or damage to the internal components.
Do not place the device in an unstable position where it might accidentally fall over.
Do not block the vents. This device has ventilation holes at the bottom/rear to prevent the internal temperature from becoming too high. In particular, do not place the device on its side or upside down.
Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Doing so may result in noise, both in the device itself and in the TV or radio next to it.

Connections and handling

Before connecting the device to other devices, turn off the power for all devices. Before turning the power on or off for all devices, set all volume levels to a minimum.
Do not use the device or headphones for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician.
Do not rest your weight on the device or place heavy objects on it, and avoid using excessive force on the buttons, switches, or connectors

Battery-powered devices

In the event that the device is not used for prolonged periods of time, however, it is advisable to periodically perform some charge/discharge cycles of the battery, to prolong its life of the battery.

Do not open

Do not open the device or attempt to disassemble the internal parts or modify them in any way. The device contains no user-serviceable parts. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified service personnel.

Water warning

Do not expose the device to rain, use it near water or in damp or wet conditions on it containing liquids that might spill into any openings. Never insert or remove an electric plug with wet hands.

If you notice any abnormality

If the power cord or plug becomes frayed or damaged, if there is a sudden loss of sound during the use of the device, or if any unusual smells or smoke should appear to be caused by it, immediately turn off the power switch, disconnect the electric plug from the outlet, and have the device in-spected by qualified service personnel.

GETTING STARTED

Installation

Place the speaker on a solid flat surface (table, ground, etc.) or use a solid speaker stand with a 35mm flange. Make sure that all fixings are tight.

ITALIAN STAGE IS SPX12AUB Professional Multimedia Loudspeaker-
Fig1

Power connection and wiring

Please connect the power cable to 110/220 (230) V 50/60Hz power voltage. Make sure to set the power input selector to the available net voltage. Connect all input/output signals with XLR and/or 6.3 mm jack cables. Do not connect multiple inputs possibilities (ex. RCA/ Jack 6,3 mm) with more than one cable.
After you finished all audio connections set the master volume (if available) to “0”. Switch on the audio source and speaker power. Set Mic/Line level to 12 o’clock position and increase master volume to a comfortable level.

CONTROL PANEL

1 Multimedia section

SD
In this socket, you can insert an SD memory card containing audio files.
USB
In this socket, you can insert a USB drive containing audio files.
BT LINK
This button allows you to pair two speakers so that you can send stereo signals from your Blue-tooth device.
MODE
Push this button to select the audio source from SD, USB, or Bluetooth external devices.
Play/Pause
This button plays or pauses the current audio file.
Song repeat
It repeats the current song.
Previous song
Skip to the previous song.
Next song
Skip to the next song.
Microphone Input
Allows you to connect a microphone with XLR or 6.3 mm Jack.
2a Microphone Volume control
Use this control to set the volume level of the microphone.
3 Line Input
Allows you to connect an external audio device (CD, radio / DVD, etc.).
with XLR, 6.3 mm Jack, or RCA plugs.
3a Line Input Volume control
Use this control to set the volume level of the Line-In Signal.
4 Signal Output
Use a 6.3 mm, Jack, to connect another powered speaker.
5 VOLUME
Master volume.
6 Treble
Use it to set the high-frequency level.
7 LIMIT LED
8 POWER LED
9 Bass
Use it to set the low-frequency level.
10 ON/OFF Power Switch
Press to power on/off the speaker box.
11 AC Power
Use it to connect the Ac power cord.
12 LABEL
Serial number and electrical characteristics.

ITALIAN STAGE IS SPX12AUB Professional Multimedia Loudspeaker-
Fig2

ITALIAN STAGE IS SPX12AUB Professional Multimedia Loudspeaker-
Fig3

REMOTE CONTROL

The media player and remote-control functioning depend on the source or audio file types. Some Keys are operating or not depending on SD, USB memory or Bluetooth audio source.

This button plays or stops the current song.
Use this option to set a sound EQ for audio files reproduction: Rock,
Pop, Classic, Jazz, Blues, Hall, Bass, Soft, Country, Opera, Norma.
Use these keys to move the sound volume up or down.
Skip to a specific song number. All songs are sorted in numeric and alphabetical order. Select a number to play the corresponding song.
Use these keys to skip up to 100 or 200 song numbers.
Use these keys to jump to next or previous song.
Use this key to stop the current song reproduction.
Use this key to select the audio source from: USB FLASH DRIVE, SD MEMORY CARD, BLUETOOTH DEVICE.
Use this key to mute the audio on current song.

ITALIAN STAGE IS SPX12AUB Professional Multimedia Loudspeaker-
Fig4 CONNECTIONS