SMALL STAGE BusyBox Smart Sign Instructions
- June 6, 2024
- SMALL STAGE
Table of Contents
SMALL STAGE BusyBox Smart Sign
CHARGING
First, please charge the battery using the included USB-C cable and your USB outlet. Simply remove the decorative front cover from the BusyBox — it’s held on with magnets — and plug in the included cable. See below for a visual to locate the USB-C port on your BusyBox smart sign.
APP
While the BusyBox smart sign is charging, download the app. You can get it quickly by scanning the QR code found on the back of this quick start guide and on the box, or find it in your device’s app store. For more information on the BusyBox App go to our website.
SETUP
Once you have the app and your BusyBox sign is fully charged, follow the
instructions on the App to connect to your BusyBox sign. It will walk you
through a setup tutorial. To see the most up-to-date list of app integrations,
and the roadmap of future
integrations, review the “Software” page on our website.
MOUNTING
Use the included wall mount and 3M CommandTM Strips to hang the included wall mount plate to a wall or door. Hang the mount, not your BusyBox sign, for the best experience. Then slide the BusyBox sign onto the hooks on the wall mount. To recharge your BusyBox, simply remove it from the wall mount, take off the cover, and plug it in with the a USB-C cable (one is included).
SAFETY INSTRUCTION
Read, keep and follow these instructions and all instructions found on, and
updated from time to time on our website. Heed all warnings. Do NOT use this
apparatus near water.
WARNING: To reduce the risk of fire or electric shock do not expose this
apparatus to rain. Do not block ventilation openings. Dismantling. rewiring,
removing components or otherwise altering the unit may cause unexpected
behavior and Will invalidate your warranty.
Warranty: We warranty that BusyBox products will be free from
manufacturer’s defects for 90 days. If the device should stop working on its
own after 90 days, please contact us, we might be able to help.
Thank you for purchasing the BusyBox smart sign. Be sure to go to the
website and fully explore the app to learn all the features and capabilities
of your BusyBox smart sign. If you need any additional help please email us
at: support@BusyBoxSign.com
FCC WARNING
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>