DONGGUAN 2BFM6-G1 Ear Endoscope User Guide
- June 1, 2024
- Dongguan
Table of Contents
Ear Endoscope User Guide
Product usage steps
Download the app
1.1, ios
https://apps.apple.com/cn/app/蠖ｩ閠ｳ/id1548618728
1.2, Android ( Please search earpick in Google Store or scan QR code)
https://play.google.com/store/apps/details?id=com.mdk.ear
Turn on the Device
Press and hold the power button to turn on the device
Connect products WIFI
3.1, Open the App and click
3.2. Connect
your mobile phone to the produce WiFi and select “earpick xxxx”
3.3. After
returning to the APP, click the button below to use it
Problem and solution
| PROBLEM | SOLUTION |
|---|
After connecting the ear scoop WiFi, the APP will not drawa picture or display
a black screen| Turn off the 4G/5G network of the mobile phone, fully charge
the ear spoon, restart it and connect it again
The camera light does not light up after starting| Restart the ear scoop
after charging
Unable to search ear scoop WiFi| Please confirm whether the ear scoop is
powered on and refresh the mobile phone WiFi list
The indicator does not light up when charging| Please change the charging line
Display network refused to join when connecting to WiFi| Restart the ear spoon
and connect it again. Only one mobile phone is allowed to connect to the ear
spoon WiFi
When the iOS mobile phone enters the APP, it will pop up to allow “Color Ear”
to use wireless data?| Please select “Wireless LAN and cellular network”
The Android mobile phone pop-up box prompts that the current WLAN cannot
access the Internet normally. Do you want to disconnect/switch the data
network auxiliary connection?| Please do not switch the ear scoop WiFi and
select “Keep connected”
Apple does not display images after connecting to the device hotspot| Please
open “Local Network” in Settings – “Visual Earpick”
If you cannot solve the problem according to the above operations, please contact us with online customer service to provide you with further practical solutions
Product parameters
| Product name | Smart visual ear spoon |
|---|---|
| Network standards | IEEE 802.11b/g/n |
| Operating frequency | 2.4Ghz |
| Image transfer rate | 30fps |
| Image sensor | CMOS |
| Operating ambient temperature | -10~50°C |
| Input power | DC 5V0.4A |
| Operating voltage | 3.7V-4.2V |
| Operating power | 0.75W |
| Optimal focal length | 0.4-2cm |
| gyroscope | Gimbal gyroscope |
Precautions
- When using, the temperature of the product will rise slightly (up to 38°) and have no effect on the human body
- When cleaning the lens, it is recom- mended to wipe corefully with a cotton swab
- Please observe the surroundings before use, and do not use the product in an environment where people are running
- This product is not intended for use by children under 3 years of age
- Do not use this product alone by children to avoid inadverteptiniaig
- Do not use the main mochine body in liquid to avoid water dairage
FCC Warning Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>