STAGE ZERO Volta 700X Portable Power Station User Manual
- June 3, 2024
- STAGE ZERO
Table of Contents
STAGE ZERO Volta 700X Portable Power Station
SAFETY INSTRUCTIONS
Please read the following instructions to ensure safe use:
- DO NOT attempt to replace the internal battery yourself.
- DO NOT operate in wet conditions, let the unit dry completely before using.
- Ensure proper ventilation and do not obstruct fan openings while in use. Inadequate ventilation may cause damage to the power station.
- DO NOT stack anything on top of the power station, whether in storage or in use. Vibrations and impacts may cause damage to or dislodge internal hardware.
- DO NOT insert foreign objects into outputs or ventilation holes.
- DO NOT place the power station near heat sources like ambient heaters, fireplaces, or furnaces.
- The power station generates the same potentially lethal AC power as household wall outlets. Please handle with caution and keep out of reach of children.
General Specs
Output Specs
Input Specs Common Loads Runtime/Charges
-
Smar10Wht Phone
Around 40-50 Hrs 10Wh -
LED Light Bulb
Around 20-30 Hrs 20W -
Television
Around 5-6 Hrs 75W -
Electronic Tools
Around 5-6 Hrs 80W -
Refrigerator
Around 4-5 Hrs 90W -
Slow Cooker
Around 2-3 Hrs 200W
537Wh×DOD×η÷ (the current load power W) = available time（unit: hrs/times）
Note： DOD is the battery discharge depth，η is the local inverter
efficiency,DOD=90%,η=90%.
QUICK GUIDE
-
Adapter Charging Port
-
DC Charging Port
-
LCD Screen
-
DC 5521 Output Port
-
Cigarette Lighter Port
-
DC Output/Wireless Charging
Power Button -
USB-A Output Port
-
USB-C Output Port
-
AC Power Button
-
AC Outlet
LCD SCREEN GUIDE
Attention:
Screen turns off when all output turns off in 2s. Screen turns off while on
standby.
- a. ECO-Mode Icon
- b. Battery Capacity
- c. Input Power
- d. Alert Icon for low Voltage
- e. Alert Icon for Temperature Anomaly
- f. Output Power
- g. Alert Icon for Overload
- h. Alert Icon for Short Circuit
How to program your power station, turn Eco Mode on or off and change the working frequency:
- To Enter Settings Mode: Turn “AC” mode to the off position. Press “AC” and “DC” buttons at the same time for 2 seconds to enter Settings Mode.
- To Change Frequency Setting: Once in Settings Mode, press the “AC” button to switch frequency of the AC output ports to 50 Hz depending on your location.
- Eco Mode: Once in “Settings” mode, press the “DC” button to turn the Eco Mode on or off.
- Press and hold the “AC” and “DC” buttons at the same time for 2 seconds to save and exit Settings Mode.
What’s in The Box
FREQUENTLY ASKED QUESTIONS
-
How do I clean my power station?
A Use dry, non-abrasive cloths to wipe. The power station is suitable for outdoor use. Simple cleaning would be required from time to time to keep the unit in good condition. -
How do I store my power station?
A Please store the power station in a dry and cool place at the recommended temperature. Do not expose the power station to humid environments. If you want to store it for a long time, please charge your unit to 80% every 6 months to extend the lifespan of battery. Remember to turn off the unit before storing. -
How do I know if my device will work with the power station?
- Step 1: Please refer to the specifications in this manual or on our website for estimated consumption for different types of appliances. Alternatively, refer to the user guide of your appliance or perform an Internet search.
- Step 2: Check the rated power of certain ports on the power station. For example, if the AC output port generates 700W of power and your device requires over 700W for an extended period of time, the power station will turn itself off.
-
My power station isn’t working. Who can I contact for assistance?
You can log a support ticket in your customer zone or contact our customer services department at 087 805 1190.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>