MYLEK MYW09 18V Cordless Drill Electric Screwdriver Set User Guide

MYLEK MYW09 18V Cordless Drill Electric Screwdriver

Product Information

Specifications

• Amazon ASIN: B07XLMTL5Y

Product Usage Instructions

1. Charging the Drill
   • Make sure to follow these steps to ensure proper charging of your drill:
   • Place the battery on a level flat surface.
   • Ensure that the charger lead is firmly pushed into the battery.
2. Power Issues
   • If your drill does not have enough power, follow these steps:
   • Make sure you are using the correct drill for the task at hand.
   • Refer to the user manual to ensure you are using the drill correctly.
3. Chuck Release and Bit Insertion
   • If you are having trouble releasing the chuck or inserting/tightening drill bits or screwdriver bits:
   • Hold the chuck tightly.
   • Operate the drill trigger in forward or reverse to release the chuck.
   • If the bits are not inserted correctly, release them and re-insert them so they are more central when tightening the chuck.
4. Sparks and Burning Smell
   • If you notice sparks or a burning smell from your drill:
   • Sparking is a normal function caused by the carbon brushes passing by the commutator. Refer to page 5, point 9 in your user manual for more information.
   • During the first few uses, your drill may emit a burning smell. This is normal and will disappear after the first few uses.
5. Missing Components
   • If your drill is missing components upon arrival:
   • Contact your place of purchase or our dedicated customer service helpline, as shown in the manual, for replacement parts available on our next day delivery service.
6. Drill Operation and Gear Slipping
   • If your drill is not operating correctly or the gears keep slipping:
   • If drilling, ensure that the torque setting is set to the drilling or screwdriver function.
   • If using the drill as a screwdriver and the gears keep slipping, adjust the torque setting on the drill to match your task.

What do I do if my drill will not charge

A) Check the battery is placed on a level flat surface and the charger lead firmly pushed into place located on top of the battery, then make sure the charger is plugged correctly into your power outlet. B) When the battery is fully charged the LED light will change from red to green meaning the battery is fully charged. If it shows red the battery is not fully charged so will only operate on low power. C) Check the charger connection is fully inserted and secure into the battery connection located at thetop of the battery. D) If the unit will still not charge contact your place of purchase for replacement, refund or contact the customer service department shown in the user manual for a replacement charger or battery.

My drill does not have enough power to drill a hole.

A) Make sure you are using the correct drill for the correct task ahead. This drill you have purchased is not a hammer drill and only designed for light DIY tasks around the home and garden so is not powerful enough to drill into brick or concrete. Read the user manual to explain how to use the drill correctly. B) Make sure the torque setting isset to the drill icon for light drilling tasks. C) Make sure the battery is fully inserted into the drill body, when fitted correctly it will click into place. The drill battery can only be removed from the drill body by firmly pushing down on the battery button located at the front of the battery and at the same time pulling away from the drill body.

I cannot release the chuck to insert or tighten up around the drill bit or screwdriver bits, or the drills bits or screwdriver bits wobble.

A) Simply hold the chuck tightly and operate the drill trigger in forward or reverse to releasethe chuck. B) You may not have inserted the bits correctly, try releasing them and re-inserting them so the bits are more central when tightening the chuck.

4. My drill sparks or as a burning smell

A) The sparking issue is a normal function which is caused as the carbon brushes pass by the commutator. These small sparks are a normal function of the cordless drill operation, please refer to your user manual on page 5 point 9. B) Your drill for the first few uses will sometimes submit a burning smell, this is normal and due to all new components in the drill and will disappear normally after the first few uses. If they are anything you are insured of you can contact our dedicated customer service helpline shown in themanual by telephone or email.

5. My drill is missing components on arrival.

A) Please contact your place of purchase or contact our dedicated customer service helpline by telephone or email both shown in the manual for replacement parts on our next day delivery service

The drill will not operate correctly or keeps slipping in gear.

A) If drilling make sure the torque setting is set to the drilling or screwdriver function. B) If using the drill as a screwdriver and the gears keep slipping this is a normal function and could be that you need to change the torque setting on the drill to cope with your task in hand If they are anything you are unsure of you can contact our dedicated customer service helpline shown in themanual by telephone or email.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>