Moory TH01A Tubular Heater Instruction Manual

June 11, 2024
Moory

Moory TH01A Tubular Heater Instruction Manual

TUBULAR HEATER INSTRUCTION MANUAL

Tubular Heater :TH01A,TH02A,TH03A,TH04A

YOU SHOULD READ THE MANUAL CAREFULLY BEFORE USING, AND KKEP THE MANUAL WELL. DISPOSAL
This symbol indicates that this product must not be placed in general household waste. It should be sent to a separate recycling facility for recovery, check Local Authorities for details.
By responsible recycling and separating this product from other household waste it will help protect the environment and human health, as the volume of waste sent to incinerators or land-fills will be reduced and natural resources conserved

Read all the instructions prior to use.

  • During the first use the heater may emit a small amount of vapour which is perfectly The reason for this is the heating wire element is coated with some lubricant oil during the production process. This will stop after approx 5 minutes after the first use and is not a safety concern.
•It is important all electrical devices are plugged into power that is

protected by a safety switch.

  • The tubular heater is not suitable for use outdoors in damp
  • Do not submerge into
  • Place in a safe place away from flammable
  • Do not place flammable liquids or gasses near the
  • Do not place the heater directly below the socket
  • Do not let the power cord over hang or touch the
  • Keep out of reach of children and animals – product gets hot to

• This is not a toy.

  • Switch off appliance when not in
  • Do not hold the tubular heater by the
  • If using an extension cord it must be as short as possible and fully
  • Check heater regularly if using with a timer or any other device that switches the tubular heater on or off
  • This leaflet should be retained for instructions on

1. Cleaning

Ensure product is unplugged from the mains. Ensure product is completely cold.
Wipe with a damp cloth, then finish by drying with a soft cloth. DO NOT use abrasive cleaning powders, clothes or metal polishes on any part of the tubular heater as this will cause damage.

2. Thermal Cut-out

The appliance is fitted with a thermal cut-out. Once the tubular heater has cooled down it will re-set itself automatically. It will then switch on and off until the reason for overheating has been removed.

5. Operation for tubular heater TH01A,TH02A,TH03A,TH04A,TH05A,TH06A

Notice: DO NOT SWITCH POWER ON TO THE HEATER UNTIL IT IS SECURELY MOUNTED .

Step 1. Install the bracket as the picture showed .

Step 2. Fix the tubular heater on the wall or on the floor like the following picture showed .

5.Tubular heater features

  • Tubular Heater TH01A,TH02A,TH03A,TH04A : basic model, with

6.  Tubular Heater Notice :

  • The temperature will then be regulated and kept at a constant level by the
  • The heater is fitted with a safety device which will switch off the heater in case of accidental overheating .
  • Make sure that any causes of overheating, such as obstructions, are removed and plug the appliance in
  • When it is summer or nobody at home or no need to keep heating , please pull out the

7. Tubular heater Specifications


Model No.

| ****

Power

| ****

Electrical Supply

| ****

IP Rating

| ****

Product Length (mm)

| Product pack size (mm)
---|---|---|---|---|---


TH01A

| ****

60W

| ****

220-240V ,50 Hz

| ****

IP55

| ****

300mm

| 3859590
TH02A| 120W| 220-240V ,50 Hz| IP55| 600mm| 6859590


TH03A

| ****

180W

| ****

220-240V ,50 Hz

| ****

IP55

| ****

900mm

| 9959590


TH04A

| ****

240W

| ****

220-240V ,50 Hz

| ****

IP55

| ****

1200mm

| 12959590


TH03A

| ****

300W

| ****

220-240V ,50 Hz

| ****

IP55

| ****

1500mm

| ****

15959590


TH04A

| ****

360W

| ****

220-240V ,50 Hz

| ****

IP55

| ****

1800mm

| ****

18959590

This product is guaranteed under warranty and covers defects in material or workmanship from 1 year of date of purchase. The original bill of purchase (with purchase date) must be submitted.
The warranty will not apply in cases of: Misuse: by non-compliance of the instructions, normal wear and tear, incorrect use, e.g. overloading, non- approved accessories, force or damaged caused by external forces, if the plug has been tampered with or removed, partially or completely dismantled product, or interference by non-qualified persons.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals