DOBE TP5-0515 DualSense Charging Dock User Manual

TP5-0515 DualSense Charging Dock

User Manual

1. Production Introduction:

TP5-0515 charging dock is specially designed for charging P-5 controllers, which can quickly charge 2 P-5 controllers simultaneously. The product indicator shows the charging status with red and green lights; the controller indicator in the front panel is in red during charging, and in green if fully charged or without controllers; the top of the display panel also shows the LOGO after power on (it is long-on white light after LOGO light is powered on); the intelligent chip is installed in the product to check the charging state. This product is provided with special 5.3V 3A power adapter, which can provide large-current quick charging; with unique design, beautiful appearance and simple operation, it is a must-have for game players.

2. Product Function Diagram and Usage Diagram:

3. Product Features:

1. The intelligent micro control technology is adopted in charging indicator management;
2. It can charge two P-5 controllers simultaneously;
3. The indicator is designed with red and green controller charging patterns, from which you can know the charging state;
4. Aesthetic appearance with convenient placement;
5. Low power consumption in standby, energy saving and environment protection;

4. Charging Process Instruction:

1. Plug the Type-C cable of the special power adapter of this product into the Type-C power supply port in the rear the charging dock, then switch on the power adapter. At this time, the LOGO in the display panel is in white, and the controller pattern shows red and green once respectively, then shows green pattern.
2. The topmost LOGO shall be in white after power on, and will turn off when the input power is cut off; the controller pattern in the middle corresponds to the charging status of the charging slot of the rear controller, and the bottom controller pattern shows the charging status of the charging slot of the front controller.
   Refer to the attached drawing 2 of “Product Function Diagram and Usage Diagram” above, place the P-5 controller at a certain angle on the charging slot of the desktop charger for charging (note: when placing the controller, make the round rubber column on the desktop charger align with the headphone hole of the controller, and then gently push into it).

Special notes: There are specific requirements on input voltage of this product, therefore, please use the special power adapter of this product for charging. Other 5V Type-C power supplies may cause charging failure or extended charging duration.

Matters Needing Attention:

When the charge level of the P-5 controller reaches about 80% or more, if you remove the controller and then plug it in, the controller may not be charged due to the battery protection function; you can continue to charge only after the battery level of the controller is below 80%.

5. Electrical Specifications of the Desktop Charger:

6. Electrical Parameters of the Desktop Charger:

7. Electrical Specifications of Power Adapter:

8. Environment Conditions:

9. Matters Needing Attention:

1. The power adapter should be unplugged when the product is fully charged or not in use.
2. This product cannot be used and stored in humid environment.
3. This product should be used or stored by avoiding dusts and heavy loads to guarantee its service life.
4. Please do not use the product which is soaked, crashed or broken and with electrical performance problems caused by improper use.
5. Do not use external heating equipment such as microwave ovens for drying.
6. If it is damaged, please send it to the maintenance department for disposal. Do not disassemble it by  yourself.
7. Keep this product away from children.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>