MYLEK MYTH01C Tubular Heater Instruction Manual
- June 6, 2024
- Mylek
Table of Contents
MYLEK MYTH01C Tubular Heater
This item gets very hot: do not touch the tubular heater when it is switched
on. Do not cover the tubular heater as this will cause overheating. Never
place the tubular heater directly on the floor without using the feet.
WARNING: Check the product before use: if the cord is damaged, it must be
replaced by the manufacturer if still under warranty, or similar qualified
person to avoid any hazards. READ ALL INSTRUCTIONS PRIOR TO USE.
Introduction
General Information
Please read the entire instruction manual before using the product and then
save it for future reference. We reserve the right for any errors in text or
images and any necessary changes made to technical data. If you have any
questions concerning technical problems please contact our Customer Services
on 0800 091 3171.
Contents
- Introduction
- Safety Instructions
- Installing and Operating
- Operation
- Cleaning
- Specifications and Technical Data
- Environmental Responsibilities
- Warranty
Safety Instructions
General safety instructions for the Tubular Heater: Warning: Read all the instructions. Failure to comply with the following instructions can lead to electric shocks, fires or serious injury.
SAVE THESE INSTRUCTIONS.
The term “tubular heater” in the following text refers to your mains-operated
unit.
Safety Regulations
During the first use the heater may emit a small amount of vapour which is
perfectly normal. The reason for this is the heating wire element is coated
with lubricant oil during the production process. This will stop after approx.
5 minutes after the first use and is not a safety concern.
IT IS IMPORTANT ALL ELECTRICAL DEVICES ARE PLUGGED INTO POWER THAT IS
PROTECTED BY A SAFETY SWITCH.
- The tubular heater is not suitable for use outdoors.
- Do not submerge into water.
- Place in a safe place away from flammable objects.
- Do not place flammable liquids or gasses near the heater.
- Do not place the heater directly below the socket outlet.
- Do not let the power cord over hang or touch the tube.
- Keep out of reach of children and animals – product gets hot to touch.
- THE SURFACE OF THIS TUBULAR HEATER CAN STILL GET HOT. IT IS THEREFORE RECOMMENDED THAT THE AGED, INFIRM, CHILDREN AND ANIMALS ARE NOT LEFT UNSUPERVISED IN THE VICINITY OF THE HEATER UNLESS A SUITABLE GUARD IS FITTED.
- This is not a toy.
- Switch off appliance when not in use.
- Do not hold or carry the tubular heater by the cord.
- If using an extension cord it must be as short as possible and fully extended.
- Check heater regularly if using with a timer or any other device that switches the tubular heater on or off automatically.
- This leaflet should be retained for instructions on use.
Safety Thermal Cut-out
The appliance is fitted with a thermal cut-out. Once the tubular heater has
cooled down it will re-set itself automatically.
Installing & Operating the Tubular Heater
THE TUBE HEATERS MUST BE MOUNTED HORIZONTALLY NOT VERTICALLY.
Step 1.
Install the support bracket to the tube heater as shown below using the
fixings supplied.
Step 2.
Fix the tubular heater to your chosen position to the wall or floor.
Important:
The heater should have the following distances from walls or between 2
heaters. Floor Mounting Wall Mounting Distance between heaters
Step 3. Operation
- Ensure the plug is plugged into the socket and then rotate the end thermosat dial to illuminate the power light.
- Then rotate the thermostat dial in a clockwise direction until it reaches it’s maximum.
- When the room has reached the desired temperature, turn the thermostat dial in an anti-clockwise direction until a small click sound is heard.
- Your desired temperature will then be regulated and kept at a constant level by the thermostat.
- The heater is fitted with a safety device which will switch off the heater in case of accidental overheating.
- To reset the tube heater, turn off the heater switch and unplug for a few minutes to allow the unit to cool down.
- Make sure that any causes of overheating, such as obstructions, are removed and plug the appliance in again and operate as normal.
- Turn off and unplug the unit when not in use or during the warmer months or when you are away from home for extended periods of time as a safety precaution and as an energy-saving function.
Cleaning
- Ensure product is unplugged from the mains and left to completely cool down before attempting to clean.
- Wipe with a soft damp cloth and then dry with a soft dry cloth. DO NOT use abrasive cleaning powders, clothes or metal polishes on any part of the tubular heater as this will cause damage.
Tubular Heater Specifications
Model No.|
Power
| Electrical Supply| IP
Rating
| Product Length (mm)
---|---|---|---|---
MYTH01C| 55W| 220-240 , 50 Hz| IP44| 510mm
MYTH02C| 90W| 220-240V, 50 Hz| IP44| 710mm
MYTH03C| 135W| 220-240V, 50 Hz| IP44| 1050mm
MYTH04C| 190W| 220-240V, 50 Hz| IP44| 1500mm
Environmental Responsibilities
Meaning of crossed-out wheeled dustbin: Do not dispose of electrical
appliances as unsorted municipal waste, use separate collection facilities.
Contact your local council for information regarding the collection systems
available.
If electrical appliances are disposed of in landfills or dumps, hazardous
substances can leak into the groundwater and get into the food chain damaging
your health and well-being. When replacing old appliances with new ones, the
retailer is legally obligated to take back your old appliance for disposal
free of charge.
SERVICE WARRANTY
Hygiene Supplies Direct guarantees the product free from defects in materials and workmanship for a period of 1 year from date of purchase. Should this unit be operated under conditions other than those recommended, at voltages other than the voltage indicated on the unit, or any attempts made to service or modify the unit, then the warranty will be rendered void. The product you buy may sometimes differ slightly from the illustrations. This warranty is in addition to, and does not affect, your statutory rights. If you have any problems with this product, please call our Help Desk on 0800 091 3171 or email [email protected]