VIVO PP-1-V024 Series 24 Inch x 24 Inch Clamp-on Desk Privacy Panel Instruction Manual
- June 14, 2024
- Vivo
Table of Contents
VIVO PP-1-V024 Series 24 Inch x 24 Inch Clamp-on Desk Privacy Panel
Instruction Manual
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product. https://vivo-
us.com/products/pp-1-v024g
GET IN TOUCH Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com Chat live with an agent!
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please contact our product support team at 309-278-5303 or help@vivo- us.com for further assistance. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
-
A (x1) Panel
-
B (x2) Clamp
-
S-A (x4) Spacer
-
S-B (x4) Washer
-
S-C (x4) M6x30mm Screw
-
S-D (x4) M6x40mm Screw
TOOLS NEEDED
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
ABOVE DESK ASSEMBLY
STEP 1
OPTION A: Flush Fit
Attach Clamps (B) to Panel (A) using M6x30mm Screws (S-C) and
Washers (S-B). Tighten with a Phillips screwdriver.
OPTION B: Gap-Fit for Cables and Devices
Attach Clamps (B) to Panel (A) using M6x40mm Screws (S-D), Washers
(S-B) and Spacers (S-A). Tighten with a Phillips screwdriver.
STEP 2
Place the assembled panel on the edge of the desk, and tighten the clamps to
secure.
NOTE: Over-tightening the clamps will cause the panel to lean forwards.
BELOW DESK ASSEMBLY
STEP 1
OPTION A: Flush Fit
Attach Clamps (B) to Panel (A) using M6x30mm Screws (S-C) and
Washers (S-B). Tighten with a Phillips screwdriver.
OPTION B: Gap-Fit for Cables and Devices
Attach Clamps (B) to Panel (A) using M6x40mm Screws (S-D), Washers
(S-B) and Spacers (S-A). Tighten with a Phillips screwdriver.
STEP 2
Place the assembled panel on the edge of the desk, and tighten the clamps to
secure.
NOTE: Over-tightening the clamps will cause the panel to lean forwards.
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
