WINGS Flobuds 300 Truly Wireless Earbuds User Manual
- June 14, 2024
- WINGS
Table of Contents
FLOBUDS 300
Truly Wireless Earbuds
PROUDLY
MADE IN INDIA
USER MANUAL
INTRODUCTION
Wings is India’s fastest growing audio, smart watches and accessories brand catering to the youth. Wings was recognized as the most Prestigious Rising Brand Of Asia 2021-2022 by BARC Asia in the gaming lifestyle accessories category.
Wings is on a mission to create a pop culture led brand that the youth is
proud to own and Nodwin, a subsidiary of Nazara Technologies, hss a strategic
investment in alignment with the long term vision.
But before you dive right in, we strongly recommend going through this user
manual thoroughly as it contains important technical information to ensure you
have & seamless audio experience with us. After you’re done with reading the
manual, get ready to go to the next level with Wings!
WHAT’S IN THE BOX
| 2N Pairs of extra ear caps (Small & Large)
---|---
| IN User Manual
| 4IN Warranty Card
| AN Type-C Charging Cable
PRODUCT LAYOUT
HOW TO PAIR
Step 1: Make sure your charging case is powered up.
Open the lid of the case and take out the earbuds. The earbuds will turn ON
and automatically enter pairing mode, and the left earbud LED will flash
quickly.
Step 2: Tap “Flobuds 300” from the smartphone’s Bluetooth menu. There is a ring prompt after a successful connection This indicates earbuds are successfully connected to your device.
Step 3: : Congratulations! You are now connected and can start playing media.
Note: If you do not connect to any device within 180 seconds of entering pairing mode, then both earbuds will automatically turn OFF. Please put the earbuds back into the case and repeat the pairing process.
TOUCH CONTROLS
| Basic Functions | Left Earbuds | Right Earbuds | Touch Controls |
|---|---|---|---|
| VolumeIncrease | Single Tap on the right earbud’s touch sensor | ||
| Volume Decrease | Single Tap on the left earbud’s touch sensor | ||
| Play/ Pause Music |
| Double Tap on the any earbud’s touch sensor
Next Track| | | Triple Tap on the right earbud’s touch sensor
Previous Track| | | TripleTap on the left earbud’s touch sensor
Voice Assistant| | | Long Press for 2 seconds on the left earbud’s touch
sensor
Game Mode ON/OFF| | | Long Press for 2 seconds on the right earbud’s touch
sensor
CALL CONTROLS
| Calling Functions | Left Earbud | Right Earbud | Touch Controls |
|---|---|---|---|
| Answering Incoming call | Double Tap on the any earbud’s touch sensor | ||
| Hang up ongoing calls | While on call, Double Tap on any earbud’s touch |
sensor
Reject incoming call|
| Long Press for 2 seconds on any earbud’s touch sensor
CHARGING THE CASE
Note: Please only use a 5V/1A adapter to charge the case as higher
voltage adapters can damage the battery of the case and earbuds.
Charging the Case: While charging the case, the case’s ice blue lights
will blink
Fully Charged: When fully charged, the charging case’s ice blue LED
lights will glow static until the charger is removed
CHARGING THE EARBUDS
Earbuds Low Battery: Earbuds will play a jingle, when the buds are low on
power.
Earbuds Charging: When earbuds are placed inside the charging case, the LED
light on the earbuds will turn ON indicating the earbuds are being charged.
Earbuds Completely Charged: When the earbuds are completely charged, the LED
light on the earbuds will go OFF.
RESETTING THE DEVICE
Please follow the below steps when you see two ” Flobuds 300″ in your
Bluetooth device menu on your mobile, or you can hear music through only one
earbud.
This means the left and right earbuds nave not auto-paired with each other.
Step 1: Disconnect the earbuds and remove ” Flobuds 300″ from your mobile
list of paired devices.
Step 2: Tap 5 times quickly to clear the pairing data on either of the
earbuds.
The LED light on both earbuds will blink 3 times simultaneously to show that
the process is completed.
Step 3 : Put them back into the charging case, and “Flobuds 300″ is ready
to use. They will automatically switch on and pair instantly as well.
TECHNICAL SPECIFICATIONS
| PARAMETERS | VALUES |
|---|---|
| Bluetooth Version: | V5.3 |
| Effective Distance: | 15M |
| Impedance: | 320hm |
| Product Weight: | SSg |
| Speaker Size: | 13mm |
| Total Play Time: | Upto 50 Hours |
| Earbuds Play Time: | Upto 10 Hours |
| Talk Time: | Upto 45 Hours |
| Standby Time: | Upto 300 Hours |
| Complete Charging Time: | 15 Hours |
| Earbuds Charging Time: | 1 Hour |
| Rated Input: | 5V/1A |
| Frequency: | 2OHz-2OKHz |
| Water and Sweat Resistant: | IPX5 |
| Charging Port : | Type-C |
SAFETY AND MAINTENANCE
Please read the below suggestions to help prolong the product lifespan and clearly understand the warranty clauses:
- Please keep the product dry, do not put it in humid conditions to avoid a short circuit.
- Donot expose it to the peak sun or high heat for extended periods, as this will shorten the lifespan of electronic components, damage the battery and deform some plastic parts.
- Please do not put it in cold circumstances to avoid damage to the PCB board.
- Please do not attempt to dismantle the product, as it may be unsafe, especially for non-professionals.
- Donot use chemical products, detergents, or city liquids to clean the item.
- Donot scratch the surface with sharp items to avoid damaging the case and appearance.
- Donot charge the product for more than 5 hours to avoid loss in battery life.
- Avoid hearing music at maximum volume for long periods as this can affect your hearing and is not
Note: Any damage to the product that is not a manufacturing defect will render the warranty null and void. Therefore, please take utmost care of your product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>