MUNBYN IMC41 Money Counter Machine User Manual

MUNBYN IMC41 Money Counter Machine

IMC41 Banknote Counter

Specifications

• Version: 1.00
• Machine Overview: Banknote Counter

Product Information

Packing Open and Installation

Packing List
When you receive the package, open and check the packing list in the package. If any item is damaged or missing, contact us.

Product Usage Instructions

Overview

1. Machine Overview
   The IMC41 Banknote Counter is a machine designed to count banknotes.

2. Safety Precautions
   Before operating the banknote counter, please read and follow the safety precautions provided in the user manual to ensure safe usage.

3. Abbreviation & Acronyms Used
   The user manual may contain abbreviations and acronyms. Refer to this section for their meanings.

Operation Interface

Display Interface
The banknote counter features a display interface that provides information and options for operation.

Operating Instructions

Start-up
To start the banknote counter, follow these steps:

1. Ensure the power cord is properly connected to the machine and a power source.
2. Press the power button to turn on the banknote counter.
3. The display interface will show the start-up screen.

Placing Banknotes
To place banknotes for counting, follow these steps:

1. Open the hopper of the banknote counter.
2. Insert the banknotes into the hopper, following the provided guider.
3. Ensure the banknotes are properly aligned and flat for accurate counting.

Currency Selection
To select the currency for counting, follow these steps:

1. Access the menu settings on the display interface.

2. Select the currency option.

3. Choose the desired currency from the available options.

4. Confirm the selection.

5. Counting Mode Selection
   The banknote counter offers different counting modes. Select the appropriate mode based on your needs:

6. MIX Mode
   In MIX mode, the banknote counter counts mixed denominations of banknotes.

7. SORT Mode
   In SORT mode, the banknote counter sorts banknotes based on their denominations.

8. CNT Mode
   In CNT mode, the banknote counter counts a specific denomination of banknotes.

9. SG Mode
   In SG mode, the banknote counter checks the authenticity of banknotes using security features.

Counting Mode Selection
The banknote counter provides various counting functions. Choose the appropriate function based on your requirements:

1. Automatic & Manual Banknote Counting
   The banknote counter can automatically count banknotes as they pass through or allow manual counting by pressing a button for each banknote.

2. Add Function
   The add function allows you to add the counts of multiple batches of banknotes together.

3. Face & ORT Function
   The face and ORT function ensures all banknotes are facing the same direction or in the desired orientation.

4. Batch & Amount Setting
   The batch and amount setting allows you to specify a desired number of banknotes in a batch or a total value to count.

5. Counting Speed Setting
   You can adjust the counting speed of the banknote counter based on your preference or requirements.

Counting Report & Print
The banknote counter can generate a counting report and provide an option for printing the report for record-keeping purposes.

Auto Save the Counting Functions
The banknote counter automatically saves the selected counting functions for future use, eliminating the need to reconfigure each time.

Menu Setting

1. User Setting

2. Sensor Value
   The sensor value setting allows you to adjust the sensitivity of the banknote counter’s sensors for accurate counting.

3. CIS Calibration
   The CIS calibration function ensures the accuracy of the banknote counter by calibrating the imaging sensors.

4. Detection Level
   The detection level setting determines the threshold for detecting counterfeit banknotes using security features.

Maintenance
Regular maintenance is essential to keep the banknote counter in optimal condition. Refer to the user manual for detailed maintenance instructions.

Technical Parameters
Refer to the user manual for technical specifications and parameters of the IMC41 Banknote Counter.

Fcc caution
Please adhere to FCC regulations and guidelines when operating the banknote counter.

Contact us
If you have any questions or need assistance with the IMC41 Banknote Counter, please contact our customer support team.

FAQ (Frequently Asked Questions)

1. Q: How do I clean the banknote counter?
   A: To clean the banknote counter, use the provided brush and calibration paper to remove any dust or debris from the sensors and rollers.

2. Q: Can the banknote counter detect counterfeit banknotes?
   A: Yes, the banknote counter has a SG mode that checks the authenticity of banknotes using security features.

3. Q: How can I adjust the counting speed?
   A: The counting speed can be adjusted in the menu settings of the banknote counter.

4. Q: Can I print the counting report?
   A: Yes, the banknote counter provides an option to print the counting report for record-keeping purposes.

1.0. Packing Open and Installation

Packing List
When you receive the package, open and check the packing list in the package. If any item is damaged or missing, contact us.

Screw driver

| 1| Brush & Calibration Paper
User Manual| | 1|

Table 1 – 1 Packing List

Overview

Machine Overview

Safety Precautions
When using this product, the following basic safety precautions should always be followed to reduce the risk of fire, electric shock, or injury to persons or animals.

1. Place the machine on a flat and stable surface.
2. Do not place the machine in dusty or dirty environments.
3. Do not place the machine in direct sunlight or near heat sources.
4. Always disconnect the power cord before performing maintenance on the machine.
5. Always connect the machine to a grounded electric outlet.
6. Use only power cords provided by MUNBYN.
7. Do not use the machine outdoors.
8. Do not expose the machine to liquids.
9. This machine contains moving parts and sharp edges. Always be careful. Do not touch the components inside the machine while it is running. Keep jewelry, long hair, ties, and lanyards away from the machine at all times.
10. Please be careful to avoid any foreign objects, such as coins or staples, falling into the unit, as it may cause damage to the machine.

Abbreviation & Acronyms Used

Operation Interface

Display Interface

currency
2| MODE| Press or touch MIX/ SDC/ SG/ CNT on the screen to switch the counting mode
3| SPEED| Touch this on the screen to switch the counting speed
4| BATCH| Press or touch BATCH on the screen to enter batch UI and set the PCS batch or amount batch
5| AUTO| Touch this on the screen to switch to Auto count or Manual count
6| ADD| Press or touch ADD on the screen to turn on the accumulation function
7| F&O/SG| Touch this on the screen to switch face, orientation, face& orientation sorting function; On the SG mode, touch this to switch denominations
8| REPORT| Press or touch REPORT on the screen to check the counting result details in the stack and reject pocket
9| PRINT| Touch this to enter printing UI to choose print count result with or without serial number
10| MENU| Press or touch MENU on the screen to enter the user menu setting UI
---|---|---
11| BACK/ESC| Press to backward to the previous UI or back to home UI
12| START/STOP| Press to start counting under manual count mode, press to stop counting while the machine is working

Operating Instructions

Start-up

• Turn on the switch after connecting the machine to the power supply. The machine enters the self-checking interface, as shown in Figure 4-1.
• Please wait patiently for about 10 seconds, and the machine will spin the banknote processing wheel several times to conduct a self-check.

Placing Banknotes

• Avoid counting wet, excessively dirty, or significantly folded banknotes.
• To avoid counting errors, please place the bills correctly.

Currency Selection

Press the CUR key or use the touch screen to enter the currency selection. As shown in Figure 4-4, the display will show AUTO.C, MULT.C, and the installed currencies.

• AUTO.C : The banknote counter uses the first passing banknote as the judgment rule to recognize the banknotes of all denominations of the same currency.
• MULT.C : Banknotes of multiple currencies are mixed and put into the banknote counter to count.

Counting Mode Selection

• MIX Mode
  Press the key “MODE” or touch it on the screen to select MIX mode. Under MIX mode, the machine will count the mixed denomination banknotes of a given currency. When the counting is complete, press the “REPORT” button to get a detailed report of the counting results. You can turn on the function ADD or BATCH or ADD+BATCH under this mode.

• SORT Mode

  • Press the key “MODE” or touch it on the screen to select SORT mode. Under SORT mode, the machine will count banknotes of the same denomination. The first banknote counted by the machine becomes the reference for the rest of the stack. The machine will display an error code when a different denomination is detected. When the counting is complete, press the “REPORT” key or touch on screen to get a detailed report of the counting results. You can turn on function ADD or BATCH or ADD+BATCH under this mode.

• CNT Mode
  Press the key “MODE” or touch it on the screen to select CNT mode. Under CNT mode, the machine only counts the number of bills, and all counterfeit detection is turned off. When the counting is complete, press the “REPORT” key or touch on screen to get a detailed report of the counting results. You can turn on function ADD or BATCH or ADD+BATCH under this mode.

  • Note: While in the CNT mode, there is only a double note detection function but no counterfeit detection functions.

• SG Mode
  Press the key “MODE” or touch it on the screen to select SG mode. Under SG mode, the machine only counts the denomination that has been chosen and rejects all others. When the counting is complete, press the “REPORT” key or touch on screen to get a detailed report of the counting results. You can turn on the function ADD or BATCH or ADD+BATCH under this mode.

Counting Function Options

• Automatic & Manual Banknote Counting
• Touch this on the screen to enable auto-Banknote Counting. In this mode, the machine starts counting automatically.
• To operate with the manual counting mode, the RESTART key must be pressed to start each count.
• Add Function
  This function is toggled on via the ADD key or touch the screen. It is used to cumulatively add the counting results of multiple counts to the total. When the add function is activated, an “ADD” indicator will be displayed on the main screen. Press the ADD key again to disable the add function.

Face & ORT Function

• This function is available by touching the screen in SORT/MIX mode. By touching this to switch Face, ORT, Face & ORT.
  • Face : This function allows the user to sort the banknotes based on whether they are loaded into the hopper face up or face down. This first note in the hopper determines the sorting and counting orientation. If the first note through the machine is face up, all notes in the hopper that are face up will end up in the stacker, and the other notes will occur in error.
  • ORT : This function allows the user to count and sort the notes by one of four orientations. The first note in the hopper determines the counting orientation. Any time a note passes through the machine and does not conform to the orientation determined by the first note, the machine will reject this note into the reject pocket.
• Batch & Amount Setting
  • Press the BATCH key to the batch setting interface, the screen display is shown in Figures 4-12. Set the batch numbers and tap the ENTER on the screen to save it. The machine will stop counting the counted pieces that match the set.
  • Tap the AMOUNT to set Amount numbers. Machine will stop counting at the counted amount that matches the set.
  • Note: The stacker’s maximum capacity is 200 bills, so the batch PCS number should be less or equal to 200.
  • The batch function is used to select a batch quantity for a specific counting process. The IMC41 counts a preset number of notes and then stops counting when the batch number has been reached, even if the notes remain in the hopper. When the banknotes are removed from the stacker, the IMC41 will continue to count up to the preset batch quantity to create another batch.

Counting Speed Setting
There are three counting speed options: 1200, 1000, and 800 (Note: 1200 is the only optional in CNT mode). The default speed is 800 in three modes. If a specific setting is needed, different counting speeds can be switched by pressing the SPEED key in any counting mode.

Counting Report & Print

• Press the REPORT key upon the completion of counting to enter the interface shown in the following figure to check the counting detail.
• Tap the PRINT key on the REPORT interface to print the counted result with or without the banknote serial number.
• Notice: Only bills with the serial numbers placed face down in the machine can be identified with the serial numbers.

Auto Save the Counting Functions
The currency mode setting is non-volatile. For example, if you set multi- currency counting mode before powering down the banknote counter, the next time the banknote counter is in multi-currency counting mode after powering on. It is very convenient that you don’t need to reselect the currency every time when you power on the banknote counter.

Menu Setting

• To enter the menu interface, press the MENU key until a beep sounds, as shown in the following figure.

• User Setting
  Press the MENU key to enter the service menu, you will be requested to input a password with the following interface. The default password is 6666.

• Sensor Values

  • Tech support may ask you to provide this information. As shown in the above figure, the sensor’s values are for the engineers to check whether any sensor has malfunctioned. If you meet any problem with us, please take a photo of this page and contact us.

CIS Calibration

• If you have problems with banknote detection errors, please try to calibrate the CIS. The CIS calibration steps are shown in Figures 5-5. For more detailed instructions, we recommend you review the reference manual or watch the following video :
• The contact image sensor (CIS) of the machine has been calibrated properly from the factory. With regular, use, the sensor’s sensitivity decreases which can lead to image errors. To resolve the issue, the IMC41 can be re-calibrated using the white calibration paper that came with the machine.

Detection Level
Adjustable levels with 5 detection types (MT、MG、UV、DOUBLE、IR), adjustment rang：0~10.

Maintenance

• After starting the machine, it will go on self-check automatically. If the preset window shows the error code or tells you to clean the sensors, generally speaking, it is because of dust on the surface of the sensor blocked by notes. So please clear the dust on the surface with a brush or soft cloth, or take the notes away. Then restart the machine.
• For more troubleshooting methods, please refer to the banknote counter maintenance manual.

Technical Parameters

• 800/ 1000 notes/min (MIX, SORT, SG)
• 800/ 1000/ 1200 notes/min (CNT)

Counterfeit Detection| UV, MG, IR, Image
Note size| 110×50~180x90mm
Display| Touch Panel screen
Power supply| 100-240 V/ 50-60 Hz
Power consumption| 60 W (MAX)
Noise Level| Around 60-75 dB
Port|

• USB port (Data collection and machine update) RS232 port (connect with Printer)
• LAN port (connect with an external display) PC port (connect with PC)

Dimensions| 240x260x230 MM
Weight| 7 KGS
Package| 420350330 MM

FCC caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Contact us

Scan the QR code for Facebook and WhatsApp online chat

• Email: support@munbyn.com (24-7 online support)
• Website: www.munbyn.com (how-to videos, warranty details)
• WhatsApp: +86 18144898200
• Skype: + 1650 206 2250
• MUNBYN provides 18 months warranty and lifetime free service. If you encounter any issues with the product, please contact the MUNBYN team to promptly receive troubleshooting tips or a replacement.
• Support : +1 650 206 2250

References

• MUNBYN® Official: Thermal Label Printer and Shipping Labels

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>