XINE XE-D01 WiFi Irrigation Timer User Manual
- June 13, 2024
- XINE
Table of Contents
XINE XE-D01 WiFi Irrigation Timer User Manual
WiFi Irrigation Timer
Larger view of products
Mounting method:
The irrigation equipment can be put horizontally or vertically. When placing
the irrigation equipment, please notice place in the correct direction to
avoid water accumulation inside the equipment.
Model XE-WD01
-
Model XE-WD01
-
Model XE-WW02
Add APP to control the process
Download the app on your mobile phone Register and log in to your account Connect your device to the network Program settings
Download App
Search for “Smart Life” or “Doodle Smart” app in the mobile app market to
download and install.
You need to allow access to the phone’s default permissions when logging into
the software.
Registration and Login
Users can register with his mobile number or email address. If the user has already registered an account, you can log in by entering your account and password.
Equipment Networking
Plug in the Type-C power cord and the green light at the top will be turned on. The different lighting shows means the device is in different modes, as follows:
- Always on: The device is connected.
- Blinking: Distribution network
- Off: The device is offline or
- Ensure that both the wireless WiFi data and Bluetooth functions are turned on at the mobile phone end, and the WiFi signal is 4GHZ or a mixture of 5G and 2.4G.
- After pluging in the power cord,press the device for 5 seconds,the green light blinking.Open the “Tuya Intelligence” Then,enter your WI-FI account and passwords to add device.The app will automatically search for the device.Then,access the device home screen afterentering the WiFi password and adding the network configuration.
If the device is still unable to connect to the network, please refer to the following:
- Ensure that both WiFi and Bluetooth are on and in a 2.4Hz
- All permissions have been allowed and the wireless network password is correct when installing the
- The device is in wiring mode and the WiFi signal is flashing. If it does not blink, long press the on/off button for 5 seconds to reset the device, the device ensures that it blinks and reconnects
Manual control
Manually tap the on/off button in the APP to start or switch off the pump.
Program settings
I Single instant setup
Clicking on the single instant setting will bring up the watering duration screen, which you can set according to your needs. Once set, click on the confirmation button and the device will irrigate according to the programmed time set by the user.
Cyclic Cycle Model
In interval mode, you can set the day of the week , the length of the irrigation period and the date to suit your needs.Finally, click on save and the device will automatically start the watering cycle.
Cyclic interval pattern
In interval mode, you can set the start time, irrigation duration and interval duration according to your needs. Once set, click on Save and the device will automatically start watering in a cycle.
Mode content settings
You can “turn on” or “turn off” the programs you have set up by clicking on the switch. If you need to delete a program, slide it to the left and click on the red bin to delete it. You can add a new program by clicking on the “+” button in the top right corner. You can set up to ten irrigation tasks.
Cautions
- If you find that the spray mist is not in good condition, check the spray nozzles for blockage by foreign Regular cleaning of the spray nozzles of foreign matter will maintain a good spraying effect.
- The container containing the water should be lower than the nozzle to prevent siphoning, although the nozzle is leak-proof and in rare cases siphoning may still
- If the temperature is below 4°C or above 50°C, discontinue use of the appliance and store it properly.
Product Parameters
Device name: XINE WiFi Irrigation Timer Dimensions: 95mm x 150mm x 95mm
Operating power: Three 7-cell batteries or USB, Type-C WiFi: 2.4GHz
Working Temperature：0.05-0.8Mpa Working environment: 1-50°C Implementation
standard: GB/T21402-2008