genaray BLT-60 Torpedo LED Daylight Focusing Flood Light User Manual

genaray BLT-60 Torpedo LED Daylight Focusing Flood Light

BLT-60 / BLT-60B
Torpedo
PORTABLE FOCUSING LED
USER MANUAL

THANK YOU FOR CHOOSING GENARAY
The Genaray Torpedo is a great choice for photographers and videographers who need a powerful and focusable beam from a compact, portable source. This advanced light is perfect for events that are usually shot on location, such as weddings and meetings. The Torpedo’s COB LED technology offers a high- powered beam from a small array that eliminates the multiple shadows that are common in LED lighting. The Torpedo features an integrated Fresnel-style lens that focuses the beam from a concentrated 15° spot with a long throw to a wide 75° flood. The BLT-60 is set to a 5600 K daylight balance, and the bi-color BLT-60B can be adjusted from 3200 to 5600 K. Both models boast a 96 TLCI rating for extremely accurate color rendering. For additional control, the removable barndoors shape the beam while minimizing light spill.

PRECAUTIONS

• Please read and follow these instructions, and keep this manual in a sate place.
• Keep this unit away from water and any flammable gases or liquids.
• Make sure the unit is powered off when plugging it into a power source.
• Use only the correct, recommended voltage.
• Do not attempt to disassemble or repair the equipment-doing so will void the warranty, and Genaray will not be responsible for any damage.
• Handle the unit with care.
• Do not stare directly at the lights when they are powered on.
• Clean the unit with only a soft, dry cloth.
• All images are for illustrative purposes only.

PRODUCT OVERVIEW

ATTACHING THE BARN DOORS

Align the barn doors with the front of the Torpedo, and screw them on until they’re secure.

NOTE

The barndoor fixture should easily screw onto the light. Don’t use force if it seems hard to turn, because you can damage the threads. Unscrew the barn doors, and then realign them and screw them in again.

If you remove the lens for any reason, you can replace it by fitting it into the Torpedo with the textured side facing in toward the LED.

MOUNTING ON A LIGHT STAND

1. Loosen the yoke’s locking screw, and fit the receiver over the light stand’s 5/8-inch stud. Tighten the locking screw until secure.
2. Loosen the tilt angle screws, and adjust the tilt angle of the light. Tighten the screws until secure.

POWERING THE TORPEDO AND ADJUSTING THE BRIGHTNESS

AC Power
Important: The Torpedo is a multivoltage fixture capable of running on 120 to 240 V, 50/60 Hz. The included cable has a 120 V, 50 Hz (North American) plug. To use this fixture with other voltages, you must use a plug adapter (sold separately).
Attach the power adapter cord to the power input socket.
Make sure the unit is turned off. Insert the mini XLR connector from the AC power adapter into the Torpedo’s power input.

Note
The 3-pin mini XLR connector should fit easily into the Torpedo’s power input. Using force to insert the connector can damage the pins. Make sure the pins are aligned, and reinsert the connector until it clicks into place.

Battery Power
The Torpedo will operate with two different types of batteries.
Sony NP-F Series Batteries: Align the battery terminals, and slide the NP-F battery into the battery slot until it locks into place (Figure A).
Professional Batteries: Use the included D-tap cable to connect the battery’s D-tap port to the Torpedo’s power input (Figure B).
Press the on button. The light powers onto the previous brightness setting.

OPERATING THE TORPEDO

Using the Barndoors
Unfold the barn doors to shape the beam and prevent light spill.

Using a Diffuser or Filter
The Torpedo comes with two diffusers of different densities and three colored filters. To insert a diffuser or filter, follow these steps:

1. Unscrew the barn doors from the focusing ring.
2. Place the filter or diffuser over the lens. It will fit into the lens’s beveled inner edge.
3. Replace the barn doors by screwing them onto the focusing ring.

Adjusting the Light
With the light turned on, press the up and down buttons to adjust the brightness from 1% to 100%, in 1% increments.

Adjusting the Color Temperature (BLT-60B Only)

1. Press the Mode button so the color temperature blinks on the display.
2. Use the up and down buttons to adjust the color temperature.
3. Press the Mode button again to set the color temperature.

Adjusting the Fresnel Lens
The Torpedo has an integrated Fresnel-style lens that focuses the angle of the beam from a 15° spot to a 75° flood.
Turn the focusing ring to adjust the beam angle to the desired width.

Mounting an Umbrella
An integrated umbrella mount in the Torpedo’s yoke accepts an umbrella that has a standard 8 mm shaft.

1. Insert the umbrella’s shaft through the umbrella mount.
2. Adjust the umbrella to the desired distance from the light, and tighten the umbrella locking knob.

RECOMMENDED ACCESSORY

Bowens Mount Adapter
The BLT-60BA Bowens adapter ring screws onto the Torpedo and lets you attach light-shaping tools with Bowens-style S-mounts, such as softboxes, diffusers, and globes.

PRODUCT SPECIFICATIONS

• Light Source: 60 W COB LED array

• Lamp Life: 50,000 hr.

• Beam Angle: 15° to 75°

• Color Temperature: BLT-60: 5600 K
  BLT-60B: 3200 to 5600 K

• CRI: BLT-60: 96
  BLT-60B: 97.8

• TLCI: BLT-60: 99
  BLT-60B: 98

• Dimming: 100% to 1%

• Battery: NP-F type (7.4V only)
  Pro/Cine with D-tap connection

• Mount: 5/8 in. receiver

• Light Intensity (lx) @ 3 ft:

  • BLT-60: 15°: 12,000 lx (5600 K)
    75°: 5430 lx (5600 K)

  • BLT-60B: 15°: 7780 lx (5600 K),7110 lx (4400 K), 7270 lx (3200 K)

  • 75°: 4140 lx (5600 K), 3730 lx (4400 K),3570 lx (3200 K)

• Working Voltage:  AC: 100 to 240 V, 50/60 Hz
  DC: 7.4 to 36 V

• Length: 8 in. (20.3 cm)

• Diameter: 3.7 in. (9.4 cm)

• AC Cable Length: 10 ft. (3 m)

• DC Cable Length: 3.4 ft. (1 m)

• Weight: 2.6 lb. (1.2 kg)

ONE-YEAR LIMITED WARRANTY

This Genaray product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. Genaray’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at Genaray’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by Genaray. If the product has been discontinued, Genaray reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse,improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, GENARAY MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED

WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.

To obtain warranty coverage, contact the Genaray Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Genaray along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
For more information, or to arrange service, visit www.genaray.com or contact us at info@genaray.com.

© 2023 Genaray. All Rights Reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>