genaray RGB-6X3S 6×3 RGB Rugged On Camera LED Lights User Manual
- June 12, 2024
- genaray
Table of Contents
RGB-6X3S / RGB-8X5M
6 × 3 / 8 × 5 RGB
ON-CAMERA LED LIGHTS
**USER MANUAL
**
6 × 3 / 8 × 5 RGB
INTRODUCTION
THANK YOU FOR CHOOSING GENARAY
Genaray’s rugged on-camera LED lights are a great addition to any vlogger’s
and influencer’s kit. Compatible with DSLRs, camcorders, and smartphones,
these LEDs can throw a lot of light at a subject to brighten and sharpen their
camera appearance. Use the small RGB-6X3S to add an accent or a kiss of color
on a background or a subject’s hair. Use the medium RGB-8X5M as a key light
for closelighting subjects with a diffuse beam. Both lights operate with an
easy-to-use interface that will let you adjust settings and
switch lighting scenes in seconds.
The lights boast three operating modes that will set the perfect tone and
mood, whether indoors or on the go. Set precise color temperature and
brightness in CCT mode, or use the 360-degree color spectrum to find the right
hue and saturation in RGB mode. Twenty-one preset effects are also available
to add realism or a touch of drama to a scene.
PRECAUTIONS
- Please read and follow these instructions, and keep this manual in a safe place.
- Keep this product away from water and flammable gases or liquids.
- Use only the correct, recommended voltage.
- Do not attempt to disassemble or repair this product.
- Clean this product with only a soft, dry cloth.
- To avoid damage to this product, be careful not to overtighten or improperly thread any of the threaded fittings.
- All images are for illustrative purposes only.
LED Light (RGB-6X3S shown)
PRODUCT OVERVIEW
Display
CONTENTS INCLUDE
- RGBAW LED Light
- Cold-shoe adapter
- USB-C to USB-A charging cable
- Carry pouch
POWERING THE LIGHT
The light is powered by an internal rechargeable battery.
Use the included USB cables to charge the light.
When the light is powered on, it opens to the most recent settings.
BATTERY INDICATOR
The light’s run time is approximately 80 minutes at maximum brightness.
The battery indicator will flash when the battery is charging. When the
indicator stops flashing, the battery is fully charged.
OVERHEATING PROTECTION
The light will automatically shut off to prevent overheating. Running the
light ina high-temperature environment or forlong continuous use will
automatically trigger overheat protection.
Wait a few minutes for the light to cool off before resuming operation.
MOUNTING THE LIGHT
Use the 1/4-20 sockets to mount the light in vertical or horizontal orientation.
- Slide the cold-shoe adapter completely into the camera’s hot shoe, and tighten the adapter’s bottom locking wheel until it’s snug against the light.
- Turn the top locking wheel clockwise to expose the 1/4-20 screw.
- Screw the light onto the shoe-mount adapter until it’s aimed correctly.
Then tighten the top locking wheel until it’s snug against the light.
OPERATING MODES
Press the Mode selector to cycle through the three operating modes: CCT, HSI,
and Effects.
CCT Mode: Select the color temperature and brightness for your shoot.
HSI (Hue, Saturation, Intensity) Mode: Select a hue from the color wheel, and
adjust the saturation and brightness. Effects: Select one of the 21 lighting
effects to add realism, drama, or a little fun to your video.
CCT MODE
Adjustment rocker: Adjusts the color temperature from 2500 to 9900 K.
Brightness dial: Adjusts the brightness from 1% to 100% in 1% increments.
HSI MODE
Adjustment rocker: Press the rocker to switch from hue to saturation
adjustment. The indicator underlines the values that can be edited.
Hue: 0° to 360° in 1° increments.
Saturation: 0 to 100 in increments of 1.
Brightness dial: Adjusts the brightness from 1% to 100% in 1% increments.
EFFECTS MODE
Adjustment rocker: Press the rocker to cycle through the seven banks of
effects.
Turn the rocker up or down to cycle through the three effects in each bank.
Each effect begins to play when it’s selected.
Brightness dial: Adjusts the brightness from 1% to 100% in 1% increments.
LIST OF EFFECTS
Bank A: Flash / Fast Flash / TV Screen
Bank B: Candle / Flame 1 / Flame 2
Bank C: Police / Ambulance / Fire Truck
Bank D: Strobe Lights 1 (Slow) /
Strobe Lights 2 (Mid) /
Strobe Lights 3 (Fast)
Bank E: Chase Slow / Chase Mid / Chase Fast
Bank F: Fireworks 1 / Fireworks 2 / Fireworks 3
Bank G: Club 1 / Club 2 / Romantic
USB-A OUTPUT PORT
(RGB-8X5M ONLY)
Use the USB-A output port and a compatible cable to power or charge small
devices like a tablet or smartphone.
PRODUCT SPECIFICATIONS
LIGHT FIXTURE
Beam Angle: 120°
Color Temperature: 2500 to 9900 K
Color Accuracy Standard:
RGB-6X3S: CRI 96, TLCI 99 at 5600 K
RGB-8X5M: CRI 96.2, TLCI 99 at 5600 K
Cooling System: Passive
Dimming: 1% to 100% (Continuous)
Display:
RGB-6X3S: TFT
RGB-8X5M: OLED
Housing Material: Aluminum
Light Intensity @3 ft.:
RGB-6X3S: 354 lx at 5600 K
RGB-8X5M: 577 lx at 5600 K
Number of LEDs:
RGB-6X3S: 135 (45 white, 45 amber, 45 RGB)
RGB-8X5M: 276 (90 white, 90 amber, 96 RGB)
Expected Lamp Life: 50,000 hr.
Dimensions (H × W × D):
RGB-6X3S: 5.9 × 3.1 × 0.5 in. (15 × 8 × 1.2 cm)
RGB-8X5M: 7.9 × 4.8 × 0.6 in. (20 × 12.1 × 1.5 cm)
Weight:
RGB-6X3S: 7 oz. (200 g)
RGB-8X5M: 1.1 lb. (508 g)
CONNECTORS
Battery Plate: Built-in battery
Power Input Connector: Type-C 5V/2A
Power Output Connector: USB Standard-A 5V/2A
(RGB-8X5M only)
MOUNTING
Fixture Mount:
RGB-6X3S: 1/4-20 thread (×2), cold-shoe adapter
RGB-8X5M: 1/4-20 thread (×3), cold-shoe adapter
POWER
DC Input Power: USB Type-C 5V/2A
DC Output Power: USB Standard-A 5V/2A
(RGB-8X5M only)
Power Source:
RGB-6X3S: DC, built-in battery 3.7 V 4000 mAh
RGB-8X5M: DC, built-in battery 3.7 V 10,000 mAh
Max Power Consumption:
RGB-6X3S: 12 W
RGB-8X5M: 18.5 W
Charging Time: RGB-6X3S: 3 hr.
RGB-8X5M: 4.5 hr.
Run Time:
RGB-6X3S: 80 min. at max brightness
RGB-8X5M: 95 min. at max brightness
PHYSICAL
Operating Temperature: 14°F to 95°F (-10°C to 35°C)
Storage Temperature: 14°F to 140°F (-10°C to 60°C)
ONE-YEAR LIMITED WARRANTY
This Genaray product is warranted to the original purchaser to be free from
defects in materials and workmanship under normal consumer use for a period of
one (1) year from the original purchase date or thirty (30) days after
replacement, whichever occurs later. Genaray’s responsibility with respect to
this limited warranty shall be limited solely to repair or replacement, at
Genaray’s discretion, of any product that fails during normal use of this
product in its intended manner and in its intended environment. Inoperability
of the product or part(s) shall be determined by Genaray. If the product has
been discontinued, Genaray reserves the right to replace it with a model of
equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect,
accident, alteration, abuse, improper installation or maintenance. EXCEPT AS
PROVIDED HEREIN, GENARAY MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED
WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides
you with specific legal rights, and you may also have additional rights that
vary from state to state.To obtain warranty coverage, contact the Genaray
Customer Service Department to obtain a return merchandise authorization
(“RMA”) number, and return the defective product to Genaray along with the RMA
number and proof of purchase. Shipment of the defective product is at the
purchaser’s own risk and expense.
For more information, or to arrange service, visit
www.genaray.com or contact us at
info@genaray.com.
© 2023 Genaray. All Rights Reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>