ULTIMEA U0320 Full HD Projector User Manual
- June 14, 2024
- ULTIMEA
Table of Contents
FULL HD PROJECTOR
USER MANUAL
U0320 Full HD Projector
1080P
Apollo P40
Model No.: U0320
THE EXPERIENCE YOU CRAVE
WE ARE READY TO HELP
support@ultimea.com
Prefer video tutorial?
Setup guidance video and User Manuals on ULTIMEA website.
https://web-u.shengcai.net/bnl7/H666G_WoSGG
support.ultimea.com
@Ultimea_Official
+1 888-598-8875 (US)
Mon-Fri 9am-5pm (PST)
+49 89-628-25828 (EU)
Mon-Fri 9am-5pm (CET)
IMPORTANT: Before using the projector, make sure you read these
instructions and the safety instructions in the online User Manual. Your
product may differ from the illustrations on this sheet, but the instructions
are the same. 1080P
Note: Due to HDCP protocol, Netflix, Amazon Prime and similar services
can not be played by the projector wirelessly. Please use a Fire TV stick,
Roku stick or Chromecast TM (not included) and connect it to the projector
to use their streaming services.
Accessories List
Product
Remote Control
Quick Setup
4.1 Power On / Power Off
Plug in the AC power cord, click the power button on the operation panel of
the machine or on the remote control and the projector will start to work.
4.2 Projector Installation
You can choose horizontal placement or hanger installation.
The projection screen can be played from 35″ to 150″.
The recommended projection screen is 50″ to 100″.
Ambient darkness will improve the clarity of the projected images.
4.3 Adjust the Image Projected On the Screen
Check the horizontal and vertical settings of the screen.
4.4 WiFi Settings
- Click the settings icon on the homepage to enter the projector settings.
- Select “WiFi” and click “OK” to confirm.
- The network list will appear after searching for the network. Select the wireless network that needs to be connected and press the “OK” button to confirm.
- Click the connect button after entering the password.
4.5 BT Settings
- Click the settings icon on the homepage to enter the to projector settings, select the “BT” click “OK” button to confirm.
- Turn on BT and select the BT signal that needs to be connected.
Screen Mirroring
For iOS Device
- Move the projector cursor to AirPlay on the homepage, select AirPlay and click the “OK” button.
Note: Make sure that the projector and mobile phone are connected to the same network. - The operation steps of the mobile phone are as follows: No setting is required on the projector.
Step 1 :Open the Control Center and tap the Screen Mirroring on your iOS
device.
Step 2 :Select the device U0320 to be cast from the searched devices.
For Android Device
- Move the projector cursor to Miracast on the homepage, select Miracast and click the “OK” button.
- Turn on the Android device, enter phone settings to find “Device Connectivity”, click on “Wireless Display”, search for U0320 of the projector and select U0320. Make sure that the projector and Android device are connected to the same network.
Note:
Due to HDCP protocol, Netflix, Amazon Prime and similar services can not be
played by the projector wirelessly. Please use a Fire TV stick, Roku stick or
Chromecast TM (not included) and it connect to the projector to use their
streaming services.
Wired Connection to Devices
How to connect the Fire TV stick to the projector:
- Connect the TV stick to power using the USB cable.
- Plug the stick to the HD port on the projector.
- Select the HD option in the settings on the projector.
The content of the Fire TV stick will be displayed on the projection screen. Use the Fire stick’s remote to select and stream your content.
6.1 HD Channel
Use an HD cable to connect the projector with a computer, game console, set-
top box and other devices that support HD output and select HD option in
settings.
Note: Due to type-C protocols, android device can not be played by HD
cable connection.
6.2 AV Channel
Use an AV cable to connect the projector with a DVD player, set-top box and
other devices that support AV output .
6.3 Multimedia Channel
After inserting the USB, select the movie, music, pictures or office file
according to the type of file you need to play and enter the corresponding
playback menu.
BT Speaker Mode
Turn on the projector and enter the homepage, use the remote control to select
the BT speaker and press the “OK” button. The display will show BT speaker
mode and enter ‘waiting to pair’. You can connect to the projector (Name:
BT-U0320) through the BT settings of the mobile device.
To use the projector function, press the return button to exit BT speaker
mode. Now the machine will turn on and enter projector mode.
Enjoy your new projector!
FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
ISED WARNINGS
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with lnnovation, Science and Economic Development Canada’s licence-exempt
RSS(s).
Operation is subiect to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator&your body.
WARNING
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This euipment has been tested and found to comply with the limits
fora Class B digital device, pursuant to Part 15 of the FCC Rules.These limits
are designed to provide reasonable protection against harmful interference in
a residential installation.This equipment generates uses and can radiate radio
frequency energy and, if not installed and use in accordance with the
instructions,may cause harmful interference to radio communications. However
there is no guarantee that interference will not occur in a particular
installation.lf this equipment does cause harmful interference to radio or
television reception,which can be determined by turning the equipment off and
on,the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Declaration of Conformity
We(Manufacturer is responsible for this declaration) Dynanic (Shenzhen)
Technology Limited 20th Floor, Building 4, Tianan Cloud Park, Bantian St.,
Longgang District, Shenzhen,China Declare under our sole responsibility that
the product
Trade name: ULTIMEA
Equipment: Projector
Model No.: U0320
To which this declaration relates is in conformity with the essential
requirement set out in the Council Directive on the Approxmation of the laws
of the Member
States relating to LVD Directive(2014/53/EU)&Rohs (2011/65/EU) product is
responsible to affix CE marking, the following standards were applied:
EN 62368-1:2014+A11:2017
EN IEC 62311:2020
ETSI EN 301 489-1 V2.2.3(2019-11)
ETSI EN 301 489-17 V3.2.4(2020-09)
EN 55032:2015
EN 55035:2017
EN 61000-3-2:2019
EN 61000-3-3:2013+A1:2019
ETSI EN 300 328 V2.2.2(2019-7)
IEC 62321-3-1:2013
IEC 62321-5:2013
IEC 62321-4:2013+AMD1:2017
IEC 62321-6:2015
IEC 62321-7-2:2017
IEC 62321-6:2015
IEC 62321-8:2017
Signature:
Date: 2023.1.6
@Dynanic Inc. All rights reserved, registered in the United States and other
countries.
16192 Coastal Hwy Lewes DE 19958, United States
| SHUNSHUN GmbH
Römeräcker 9 Z2021, 76351 Linkenheim-Hochstetten, Germany
---|---
| UK Crossborder limited
7 Bell Yard London WC2A 2JR, UK United Kingdom
Made in China
Manufacturer: Dynanic (Shenzhen) Technology Limited
Address: 20th Floor, Building 4, Tianan Cloud Park, Bantian St.,
Longgang District, Shenzhen, China 518000
FCC ID: 2A9OO-U0320P
IC: 29805-U0320P
If we can be of assistance, please do not hesitate to contact us.
+1888-598-8875 (US)
Mon-Fri 9am-5pm (PST)
+49 89-628-25828 (EU)
Mon-Fri 9am-5pm (CET)
support@ultimea.com
support.ultimea.com
https://web-u.shengcai.net/bnl7/H666G_WoSGG
@ultimea_official
Documents / Resources
|
ULTIMEA U0320 Full HD
Projector
[pdf] User Manual
U0320, B0C5LR4NY1, B0BPY15KL9, U0320 Full HD Projector, U0320, Full HD
Projector, HD Projector, Projector
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>