nVent 32M Snap Close Conduit Clamps Owner’s Manual
- August 7, 2024
- nVent
Table of Contents
nVent 32M Snap Close Conduit Clamps
Product Information
Specifications
- Material: Spring Steel
- Compatible Conduit Types: 2″ EMT, 2″ Rigid/Pipe
- Hole Diameter: 9/32″
- Finish: Plain
- Catalog Number: 32M
Product Usage Instructions
Features:
- May be used for either vertical or horizontal installations
- Eliminates the need for offset bending conduit
- Finger closure design, no tools required for installation
Installation Steps:
- Select the appropriate size of the Snap Close Conduit Clamp for your conduit type (2″ EMT or 2″ Rigid/Pipe).
- Position the clamp on the conduit at the desired location.
- Close the clamp using the finger closure mechanism until securely fastened.
- Repeat the process for additional clamps as needed to secure the conduit in place.
FAQ
Q: Can these clamps be used with other sizes of conduit?
A: The Snap Close Conduit Clamps are specifically designed for use with 2
Q: Do I need any tools for installation?
A: No, the clamps feature a finger closure design, eliminating the need for tools during installation.
Q: How do I ensure proper spacing when using these clamps?
A: The clamps are designed to provide positional consistency and maintain spacing entering electrical boxes. Follow the installation steps provided in the user manual for accurate placement.
CATALOG NUMBER
The nVent CADDY Snap Close Conduit Clamps (M-Series) is a fast and efficient method to secure conduit branch circuits for electrical installations. The M-Series is designed to provide positional consistency in application by eliminating conduit offset as well as maintaining spacing entering electrical boxes. Increase installation efficiency by utilizing our comprehensive conduit range for your next electrical project.
CERTIFICATIONS
FEATURES
- May be used for either vertical or horizontal installations
- Eliminates the need for offset bending conduit
- Finger closure, no tools required
PRODUCT ATTRIBUTES
- Material: Spring Steel
- Finish: nVent CADDY Armour
- Outer Diameter: 50 – 60 mm
- Hole Size: 7 mm
- Hole Type: Plain
- Static Load 1: 440 N
- Static Load 2: 110 N
DIAGRAMS
SAFETY WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication, or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury, and death and/or void your warranty.
Contact information
North America
- +1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Support
Europe
-
Netherlands:
+31 800-0200135 -
France:
+33 800 901 793 -
Germany:
800 1890272 -
Other Countries:
+31 13 5835404
APAC
-
Shanghai:
+ 86 21 2412 1618/19 -
Sydney:
+61 2 9751 8500
Our powerful portfolio of brands:
- CADDY
- ERICO
- HOFFMAN
- RAYCHEM
- SCHROFF
© 2024 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>