E-IMAGE EPTZ-STND-21A 21ft Tripod Stand User Manual
- August 29, 2024
- E-IMAGE
Table of Contents
21ft PTZ Tripod Stand
PTZ-STND-21A/ 21C User Manual
V1.0
2024.05
www.eimagevideo.com
Safety Instructions
Thanks for purchasing E-IMAGE products.
We encourage you to read this manual carefully to familiarize yourself with
all the detailed features before operating it.as some of them may be new to
you. The manual includes all safety instructions, operation guidelines, and
maintenance procedures. Please ensure that all equipment is operated correctly
to avoid any defects or damage, especially ensuring that the tripods are
steady.
- Please don’t exceed the max. payload of tripod.
- Before mounting the camera, ensure that the tripod is leveled and securely stabilized on the ground.
- When adjusting the tripod height, be sure to raise or lower the center column slowly to prevent your hand from getting trapped by the locks.
- Plase make care about your fingers when opening the base to prevent them from getting caught.
- Please remove the camera from the tripod before transportation.
- When tripod working outdoors in windy conditions,it’s important to install the wind bracing system and add sandbags for stability.
The product packing comes with the following items. In case that any item is found missing, please contact E-IMAGE or your local selling agent.
PTZ-STND-21A 21C
Specifications
| Model | PTZ-STND-21A | PTZ-STND-21C |
|---|---|---|
| Max.working height | 635cm / 250in | 635cm / 250in |
| Min.working height | 179cm I 70.5in | 179cm I 70.5in |
| Transport length | 179cm I 70.5in | 175.0cm I 70.5in |
| Center tube size | 45,40,35,30,25mm / 1.8,1.6,1.4,1.2,1.0in | 45,40,35,30,25mm / |
1.8,1.6,1.4,1.2,1.0in
Leg tube size| 25.0mm / 1.0in| 25.0mm / 1.0in
Payload| <5m 10.0kg / 22.0lbs, >5m 5.0kg / 11.0lbs| <5m 10.0kg / 221bs, >5m
5.0kg / 11.0lbs
Net weight| 8.7kg / 19.21bs| 7.7kg / 17.0lbs
Spigot size| 3/8″| 3/8″
Footprint diameter| 170.0cm/ 66.9in| 170.0cm/ 66.9in
Material| Aluminum| Carbon Fiber
Open the base
- Please loosen the central locking knob on the upper bracket.
- Keep one leg against the ground, meanwhile hold the other two legs and spreader them (we recommend the open angle more than 30degree).
- Press down the upper bracket until the leg brace is parallel to the ground, to reach the max.stability. Then turn the locking knob 1 tightly.
- If you want to get more stability, loosen the knob 1 & knob 2, the central column can be adjusted to a lower position but can’t be below the legs, then lock the knobs tightly.
Height adjustment
- Loosen the locking knob on the riser to unlock the central column.
- Adjustment the central column to the ideal height.
- Tighten the locking knob on the riser to lock the central column.
Use levelling leg
- Loosen the levelling locking knob on the leg.
- Extend the leg tube until the stand is in the vertical position.
- Tighten the levelling locking knob,make sure the stand is levelled.
Wind bracing
- Screw the metal peg deeply into the ground through the metal holeon each of the feet.E-IMAGE recommends that the stabilizing pegs are usedeven in non-windy conditions for extra security.
- Hook the wind bracing cable kit to the triangular plate.
- Put the sandbag on leg brace to increase stability.
El-A29 User Manual
The E-IMAGE EI-A29 Leveling Base Head provides fast leveling for tripods
without built-in levels, Bubble level helps ensure that your base is level to
the horizon.Designed with 1/4″ male top screw and 3/8″ female bottom socket,
compatible with various tripods and cameras.
Specification
| Payload range | 10kg / 22.0lb |
|---|---|
| Net weight | 280g / 0.6Ib |
| Adjust angle | ±15° |
| Base screw | 1/4″ / 3/8″ |
| Bottom hole | 3/8″ |
Size
Contact Information
NINGBO EIMAGE STUDIO EQUIPMENT CO., LTD.
Add: NO.1230 South Cihai Road, Luotuo Industry Zone, Zhenhai, Ningbo, China
315202
Tel: 86-574-55681753/55681675
Fax: 0574-86590078
E-mail: sales@eimagevideo.com
Visit www.eimagevideo.com for more information
EIMAGE official QR code
http://www.eimagevideo.com/
Instructions
- Please screw the camera into the top male screw of A29.
- Built-in 3/8″ female bottom socket, compatible with various tripods.
- Adjust the head as needed, can swivel in any direction.
*Notes: Three anti-twist screws prohibit unwanted rotation of tripod head, camera or other attached device.
In The Box
| El-A29 | x1 |
|---|---|
| 2.5mm Hex Wrench | x1 |
| 2.0mm Hex Wrench | x1 |
| 1/4″ to 3/8″ screw adapter | x1 |
SUPPORT YOUR IMAGE
NINGBO EIMAGE STUDIO EQUIPMENT CO., LTD.
Address:No.1230 South Cihai Rd, Luotuo Industry zone, Zhenhai, Ningbo, China,
315202
Tel:86-0574-86590061,86-0574-86590031
Fax:0574-86590078
E-mail: sales@eimagevideo.com
Visit www.eimagevideo.com for more information
E-IMAGE
Offical QR Code
http://www.eimagevideo.com/E_mobile/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>