motionics WiMER3 Wireless Measurement Read User Guide
- June 14, 2024
- motionics
Table of Contents
motionics WiMER3 Wireless Measurement Read User Guide
Important Notes
- Turn o! the device after use. It will NOT turn o! automatically
- Do NOT open the device. Opening causes permanent damage and voids the warranty.
Description
- Sensor Connector – connect to Mitutoyo linear gage with RM12BPE-6PH connect
- Tri-Color LED
- – Device is on
- – Device is in charge
- – Device is fully charged
- Charge Port – connect to cable to charge WiMER3
- On/Off Button – press to turn WiMER3 on/off
Product Page
Included in the box
- WiMER3 Base 1X
- USB Charging Cable 1X
- USB Power Adapter 1X
- User Guide 1X
Compatible Software
- iOS: Multiage Reader (download for FREE from the App Store)
- Android: Multiage Reader (download for FREE from the Play Store)
- Windows: Multiage Reader (BLE dongle required, download for FREE from www.motionics.com Go to Resources > Download > Software)
MultiGage Reader App iPhone/iPad
Quick Start
- Turn on your WiMER3 and connect it to a Mitutoyo linear gage.
- Plug in USB Bluetooth dongle if using Windows PC.
- Run the software, tap Scan/+ button to enter pairing page
- Wait for the software to “knish scanning nearby devices, select WiMERXXXX to connect
- Connection may take a few seconds, once paired, WiMER3 reading shows in the software
Motionics, LLC
© 2023 Motionics, LLC
www.motionics.com
All Rights Reserved
info@motionics.com
Made in the U.S.A.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>