motionics WiMER2 Wireless Measurement Read User Guide
- June 14, 2024
- motionics
Table of Contents
motionics WiMER2 Wireless Measurement Read
Important Notes
- Turn off the device after use. it will Not turn off automatically.
- Do NOT open the device. Opening causes permanent damage and voids the warranty.
Description
-
10-Pin Connector – connects to data cable
-
Tri-Color LED
– Device is on
– Device is in charge
– Device is fully charged -
USB Port – connects to USB cable to charge
-
on/off Button – push on and push off
-
Trigger Connector – 2.5 mm audio port, connects to trigger switch
Included in the box
- WiMER2 Base 1X
- Trigger Switch 1X
- USB Charging Cable 1X
- USB Power Adapter 1X
- User Guide 1X
Compatible Software
- iOS: MultiGage Reader (download for FREE from the App Store)
- Android: MultiGage Reader (download for FREE from the Play Store)
- Windows: MultiGage Reader (BLE dongle required, download for FREE from www.motionics.com Go to Resources > Download > Software)
MultiGage Reader App iPhone/iPad
MultiGage Reader APP Android
Quick Start
- Turn on WiMER2 and connect to Fowler Test Indicator.
- Plug in USB Bluetooth dongle if using Windows PC.
- Run one of the aforementioned Apps/software.
- In the main page, tap Pair button to bring up a new pairing page.
- Wait for the software to finish scanning nearby devices , select WiMERXXX tp connect.
- Connection may take a few seconds , one paired , instrument readings show in the software.
Motionics, LLC
© 2023 Motionics, LLC
www.motionics.com
All Rights Reserved.
info@motionics.com
Made in the U.S.A.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>