CHERRY KC 6000 SLIM Corded Keyboard User Manual

: June 14, 2024
: CHERRY

Table of Contents

KC 6000 SLIM Corded Keyboard
Before you begin
For your safety
Connecting keyboard
Raising the angle of the keyboard
Set up zoom function
For keyboard with US layout: Enter the € character
Cleaning the keyboard
Device disposal
Technical data
Certifications
Documents / Resources

CHERRY KC 6000 SLIM FOR MAC
Corded Keyboard
OPERATING MANUAL

KC 6000 SLIM Corded Keyboard

CHERRY KC 6000 SLIM Corded Keyboard

Screen darker/brighter
Mission Control
Previous title
Play/pause
Next title
Sound on/off
Sound quieter/louder
Lock computer*
Eject media
Shift key lock function LED
Zoom*

≥ macOS 10.13

CHERRY KC 6000 SLIM Corded Keyboard - Product overview

Before you begin

Every device is different!
The operating instructions contain information on effective and reliable use.

Read the operating instructions carefully.
Keep the operating instructions and pass them on to other users.

The CHERRY KC 6000 SLIM FOR MAC is a keyboard for operating computers.
For information on other products, downloads and much more, visit us at www.cherry.de.

For your safety

Risk of choking from swallowing small parts

Keep the device out of the reach of children under 3 years. RSI stands for “Repetitive Strain Injury” RSI arises due to small movements continuously repeated over a long period of time.
Set up your workspace ergonomically.
Position the keyboard and mouse in such a manner that your upper arms and wrists are outstretched and to the sides of your body.
Take several short breaks, with stretching exercises if necessary.
Change your posture often.

Connecting keyboard

Plug the keyboard into the USB port of your computer.
The keyboard is ready to use without installing any software.

Raising the angle of the keyboard

You can raise the angle of the keyboard by sticking the four enclosed rubber feet over the anti-slip pads on the bottom of the keyboard.

Turn off the computer or deactivate the connection.
Clean the area around the rear anti-slip pads.
Peel off the protective foil from the rubber feet and stick them over the anti-slip pads so that they go completely into the recess on the rubber feet.

Set up zoom function

This function is available to you with operating system macOS 10.13 and higher. To be able to change the screen resolution using the zoom key ( ), you have to activate the zoom function.

Open the menu by clicking the Apple symbol ( ) at the top left of the screen.
In the menu, click “System settings”.
Click the “Accessibility features” symbol.
Click “Zoom” in the menu on the left.
Activate “Use keyboard shortcuts to zoom”. When you press the zoom key ( ), the screen view is enlarged. When you press the zoom key again ( ), the screen returns to the standard resolution.

For keyboard with US layout: Enter the € character

Keyboard variant JK-1610US-1 does not have the € character. You can enter the € character using the following key combination:

Press the Dial key (⌥), the shift key (∧) and the 2 key simultaneously.

The € character is output.

Cleaning the keyboard

Switch off the computer.
NOTE! Aggressive cleaning agents and liquids can damage the keyboard
• Do not use solvents such as gasoline or alcohol and scouring agents or scouring sponges for cleaning.
• Prevent liquids from entering the keyboard.
• Do not remove the keycaps of the keyboard.
Clean the keyboard with a slightly damp cloth and some mild cleaning agent (e.g. dishwashing liquid).
Dry off the keyboard with a soft, lint-free cloth.

If the keyboard is not working

Use another USB port on the computer.
To make sure the keyboard is not defective, test it on another computer if possible.

Device disposal

Do not dispose of devices with this symbol in household waste.
Dispose of the devices in accordance with statutory regulations – at your local dealer or at municipal recycling centers.

Technical data

Designation	Value
Supply voltage	5.0 V/DC ±5%
Current consumption	max. 20 mA
Storage temperature	-20 °C … +60 °C
Operating temperature	0 °C … +40 °C

Certifications

10.1 Federal Communications Commission
(FCC) Radio Frequency Interference Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
10.2 For UL
For use with Listed Personal Computers only!
10.3 UKCA
UK Authorised Representative:
Authorised Representative Service
The Old Methodist Chapel
Great Hucklow
SK17 8RG
UK
User Guide about Hazardous Materials
(People’s Republic of China Electronic Industry Standard SJ/T11364-2014)
0: Indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is below the relevant threshold of the GB/T 26572-2011 standard.
X: Indicates that the concentration of the hazardous substance of at least one of all homogeneous materials in the parts is above the relevant threshold of the GB/T 26572-2011 standard.

| Toxic and hazardous materials or elements
---|---
Part name| Pb| Hg| Cd| cr+6| PBB| PBDE
PCB’s/flex circuits| 0| 0| 0| 0| 0| 0
Electronic components| X| 0| 0| 0| 0| 0
Solder paste| 0| 0| 0| 0| 0| 0
Cable| 0| 0| 0| 0| 0| 0
Plastic parts| 0| 0| 0| 0| 0| 0
Metal parts| 0| 0| 0| 0| 0| 0
Rubber parts| 0| 0| 0| 0| 0| 0

CONTACT
For Europe:
Cherry Europe GmbH
Cherrystraße 2
91275 Auerbach/Of.
Germany
Internet: www.cherry.de
For USA:
Cherry Americas, LLC
5732 95th Avenue
Suite 850
Kenosha, WI 53144
USA
Tel.: +1 262 942 6508
Email: sales@cherryamericas.com
Internet: www.cherryamericas.com
(Declaration of the Presence Condition of the Restricted Substances Marking)

| (Restricted substances and its chemical symbols)
---|---
(Unit)| (Lead)| (Mercury)| (Cad- Hum)| (Hexavalent chromium)| (Polybrominated biphenyl’s| (Polybrominated diphenyl ethers)
(PCB)| a| a| 0| 0| 0| 0
(Electric components)| –| 0| 0| 0| 0| 0
(Solder paste)| 0| 0| 0| 0| 0| 0
(Cable)| 0| 0| 0| 0| 0| 0
(Plastic parts)| 0| 0| 0| 0| 0| 0
(Metal parts)| Q| 0| 0| 0| 0| 0
(Rubber parts)| Q| 0| 0| 0| 0| 0

(Note 1: “Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.)
(Note 2: “○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.)
(Note 3: “-” indicates that the restricted substance corresponds to the exemption.)

64410055-04,
© Jun 2023 (JK-1610 = Mod. JK-16)

Documents / Resources

| CHERRY KC 6000 SLIM Corded Keyboard [pdf] User Manual
KC 6000 SLIM Corded Keyboard, KC 6000, SLIM Corded Keyboard, Corded Keyboard, Keyboard
---|---