OLIGHT Obulb 2 Colorful Light Ball with Transparent Shell User Manual
- June 17, 2024
- OLIGHT
Table of Contents
OLIGHT Obulb 2 Colorful Light Ball with Transparent Shell User Manual
**IN THE BOX
Adhesive Metal Badge
USB Magnetic Charging Cable
**
**Table 1: Light Ball
IPX7
1.5m
Working temperature 0-40
°
700mAh 3.7V (2.59Wh)
90g/3.17oz (Including Battery)
57H 50mm $2.24H 1.97in
Above data are tested per ANSI/PLATO FL 1-2019 standard in Olight’s labs for reference**
Table 2:
USB Magnetic charging cable
| Cable length | 0.5m |
|---|---|
| Input | USB-A 5V 1A |
| Output | CC&CV 4.2V±0.05V 0.5A |
| Time to fully charge | About 1.5 hour **Multi-language dictionary, see |
Table 3;**
Product specification, see Table 1 and Table 2;
Operating instructions as below:
Product appearance, see Figure 1;
Before first use, please charge the product to unlock it, see Figure 2;
Charge to unlock the product before first use.
Two switching options, see Figure 3;
The switch is at the bottom of the product. Press the bottom switch or the top
of the light ball (when the product is placed on a hard surface) to operate
the product.
On, see Figure 4;
When the light is off, press or double press to turn on.
Off, see Figure 5;
When the light is on, double press to turn off.
Mode Switching, see Figure 6;
When the light is on, press to switch modes, and the output cycles through the
following modes: White light->Static color ->Dynamic color 1->Dynamic color
2->Dynamic color 3->Dynamic color 4->Dynamic color 5->Red flash-> Power off ->
White light Release to select the desired mode.
Change brightness level (Non-static Color Mode), see Figure 7;
When the light is on, press and hold to change the brightness level
steplessly.
**Adjust Color, see Figure 8;
In the Static color mode, press and hold to adjust the color. Release to
select the desired color.
Turn on White light Low, see Figure 9;
When the light is off, press and hold to enter the default White light low.
10 Lock/unlock, see Figure 10;
Lock: When the light is off, press and hold for 2 seconds until the default
White light low is turned on and off.
Unlock: Press and hold for 1 second until the White light is on.
Battery Indicator, see Figure 11;
Green: 50%~100%; Yellow: 10%~49%; Red: < 10%;
Application of adhesive metal badge, see Figure 12
**
Documents / Resources
|
OLIGHT Obulb 2 Colorful Light Ball with Transparent
Shell
[pdf] User Manual
Obulb 2 Colorful Light Ball with Transparent Shell, Obulb 2, Colorful Light
Ball with Transparent Shell, Light Ball with Transparent Shell, Ball with
Transparent Shell, with Transparent Shell, Transparent Shell, Shell
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>