Gold Cherry iPad Smart Case User Manual

iPad Smart Case
User Manual

Installing your iPad on your smart case

FOR THE VERSION WITH A ROUNDED KNOBS SYSTEM

|
---|---
Open the case flat on the table & Turn rounded knobs towards the bottom as shown, take your iPad top first| After placing your iPad Tum the knobs to lock your iPad in position
|
Open the case flat on the table & Turn rounded knobs towards the bottom as shown, take your iPad top first| Slightly bend the protective case to unleash your iPad bottom & use your  second hand to pull it out

Wireless connection

1. The pairing button can appear in 2 ways depending on your case model:
   

2. 

3. Tap iPad keyboard
   Note: Bluetooth will automatically be connected when used next time.

Charging instructions & maintenance

Maintenance: keep at normal temperature and charge at normal voltage. If you don’t use it for a long time, you need to charge your keyboard in time (once in two months)

Indicators Instructions

1. Blue LED: Blink at paring; Stays on after paired successfully
2. White LED: Caps lock indicator
3. Red/Green LED: Blink at low battery, the red light turns on when charging; the green light when fully charged

To check power status, press the key and hold 1 second
Red LED flickers once: >25% power left
Red LED flickers twice: >50% power left
Red LED flickers 3 times: >75% power left

Keyboard and Trackpad function introduction

on/off; To  check power status, press the key, and hold 1 second)

Special key instructions

1. Switch input method by pressing

2. Turn on/off or adjust the backlit.
   Operating method: Press once to turn on the backlit; Press again will increase the brightness; The third time will maximize the brightness;
   The fourth time will turn off the backlit

3. Press these two keys to switch the rainbow backlight and white color

4. To type the character in a grey area, hold shift and press the desired character

5. +other keys To type some uncommon special characters

6. Some special short characters
   Cut        paste      Select All       Copy

7. Breathing lamp mode: There are 2 key combinations
   control breathing lamp switch
   controls the speed of the breathing lamp+

8. Turn on/off the touchpad function.

Notice:

• Operating system: 105 13.4 and above
• Custom settings ( when wireless pairing is successful ):
  Settings Accessibility Touch Assistive Touch Devices Connected devices Customize Additional Buttons Set the action on the trackpad Select instruction

| Left-click (customizable): Tap with one finger to click
---|---
| Slide the pointer: Move with one finger
| Drag items: Tap twice with one finger, then hold and drag around
| Slide over Switcher:  Slide one finger down from the top edge of
the screen to see all active apps
| To see the Dock while you’re using an app: slide one finger up from the bottom edge of the screen until the Dock appears, then release
| Pay attention to: Slide your fingers from right to left
| Switch window to left: Swipe from left to right with both fingers
| Right-click (customizable): Tap with two fingers to right-click
| Roller scroll: Swipe with two fingers to the left/right or scroll up/down
| Open the recently used window:(Switch back to the previous  plication window)Three fingers moving down at the same time
| Return to the home page: All three fingers moving up at the same time
| An active window (left/right slide switch) Slide three fingers simultaneously left and right
| Screenshot: Tap with four fingers

User Help center is available onwww.GoldandCherry.com/Manual
For additional help contact Support@GoldandCherry.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>