OPTT Aura Pro Duo Underbody Rigid Light Bars Installation Guide
- June 5, 2024
- OPTT
Table of Contents
OPT7® Aura™ Pro Duo Underbody Rigid Light Bars Installation Guide
Components
Installation
STEP 1
Inspect kit to ensure all contents was included.
STEP 2
Decide where to locate the control box and ensure wiring has enough length for light bars to be installed in desired location.
IMPORTANT
The control box must be installed inside the vehicle as it is not waterproof.
Avoid installation areas of the engine bay + heated surfaces.
EXAMPLES
WARNING
- Connecting to more than 10 AMP will override the kit and cause early failure, ensure it is 10AMPs or less!!
- Please ensure that the LED bars or strips/control box/wiring all are mounted in areas where will not exceed 85℃ or 185℉.
STEP 3
Scan the QR code on the back of the control box to download the app.
STEP 4
Secure Control box in desired location with Velcro or zipties.
* The control box is NOT waterproof. Tuck it away from the elements.
STEP 5
Secure the light strips using the zip ties to tie all the wiring away from the moving components.
* IMPORTANT:
The LED connectors are not waterproof. You will need to use HEAT SHRINK
TUBE (not included) or ELECTRICAL TAPE around the LED connectors to ensure the
longevity of the lighting kit.
STEP 6
Open the “OPT7 Connect” App, pair your smart phone to the control box, and pick your desired color!
AUX WIRING FOR A DOOR/DOME LIGHT
Please scan to see a detail instruction on Door Assist Sync or go to https://support.opt-7.com/549690-AURA-Door-AssistInstallation-Guide
3 Ways to Control Your Lights
1 MOBILE PHONE
Scan the QR code with your phone’s camera and it will take you to the app’s check-in page.
OPT7 CONNECT APP
- Colors
- Modes
- Door Assist
- Support
- Ability to control up to 4 devices at once
QR CODE TO DOWNLOAD
Download the free “OPT7 CONNECT” App
- App iOS (12+) available on App Store
- Android (6 +) available on Google Play
2 4-KEY REMOTE CONTROL
Functions of the Keychain remote
A Power ON/OFF
B RGB Color Selection (7 Color)
C Dimmer Up/Down (4 Levels)
D Beat (20 Color)
3 FULL-SIZE REMOTE CONTROL
FUNCTIONS OF THE EZ REMOTE
40 buttons control, using the EZ remote to select your desired color or pattern.
- Power Button
- ON & OFF mode
- Only control “RGB” light & “STYLE” mode
- Will automatically remember your last setting mode when you turn it on again
- Dimmer Up/Down
- Brightness setting : 10 Levels
- RGB Color Selection
- Supports 20 color changes
- Independent Control of White Light
- Power ON/OFF
- Dimmer Up/Down (10 Levels)
- Default Brightness (4 Levels)
- Style Mode
- 3 Color Cycle
- Default 3 color variations (Random)
- Supports brightness and speed adjustment
- 3 Fade
- Default 3 color variations (Random)
- Supports speed adjustment
- 7 Color Cycle
- Default 7 color variations (Random)
- Supports brightness and speed adjustment
- Beat/SoundSYNC
- Default 20 color variations (Random)
- Supports brightness adjustment
- Strobe
- Default 20 color variations (Random)
- Supports brightness and speed adjustment
- AUTO
- Play all dynamic style modes
- Quick/Slow
- Speed Setting : 10 Levels
Disclaimer
OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation. If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance.
OPT7 recommends installation for safety and guidance.
Modified installations or installation recommendations not specified by OPT7 Lighting will void product warranty.
Need Support?
Scan for tutorial videos, troubleshooting tips, and more.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>