Gold Cherry A2232 Smart Case for ipad Pro 12.9 Inch Pro User Manual

Gold Cherry A2232 Smart Case for ipad Pro 12.9 Inch Pro

Smart iPad keyboard case

1.  iPad protective cover
2.  lnstall/Uninstall button
3.  Keyboard body
4.  Function keys (blue area)
5.  Capital indicator
6.  Battery indicator (4 lights)
7.  Bluetooth indicator
8.  Instructions
9.  Micro-USB charging cable
10. Usb discharging port
11. Micro-USB charging port
12.  Power switch
13. Pad

Charge for keyboard

Using cable to connect both ports,then enter into charging state,you can see power state through power indicator.

Install iPad

1. Load the iPad into the the protective shell,suggest loading angel is 10.
2. Gently press the sides of the iPad by thumb,make sure the iPad is well seated into the shell slot.

Uninstall iPad

1. Constantly press the “push” button
2. Gently push the round hole from the back of the protective shell, take out the ipad safely.

POWER ON

1.  Open the keyboard cover, move the switch to “on” position, then capital indicator and Bluetooth indicator display white and blue color respectively, after 3 seconds will automatically go out.
2.  Close the keyboard cover, and move the switch to “off” position, then enter into sleep mode.

Open the bluetooth signal and connetion

KEYBOARD FUNCTION INTRODUCTION

Special key instructions

User Help center available on www.GoldandCherry.com/Manual
For additional help contact Support@GoldandCherry.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>