CHERRY MX-LP 2.1 Compact Wireless Gaming Keyboard User Manual

: June 5, 2024
: CHERRY

Table of Contents

CHERRY MX-LP 2.1 Compact Wireless Gaming Keyboard
For Your Safety
Changing the Connection Type
Installing the CHERRY Gaming Software
Discovering Additional Functions
Resetting the Keyboard to Factory Defaults
Troubleshooting Problems
Technical Data
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CHERRY MX-LP 2.1 Compact Wireless Gaming Keyboard

CHERRY MX-LP 2.1 Compact Wireless Gaming Keyboard
product

Start the CHERRY Gaming Software. To program the keyboard with the gaming software, you must first connect it via the USB cable. Hold down the fn key to access this function.
Windows Key. Press fn+ to enable / disable Gaming Mode.
fn key to access secondary functions of keys. Press and hold to view connectivity status.
Hold down the tn key and esc key together for 5 seconds to reset the keyboard to factory default settings.
hold down the fn key and press the following keys to access desired functions
Enable connection via USB cable.
Enable connection via Bluetooth.
Enable RE wireless connection.
Enable Bluetooth Channel 1, 2 or 3.
Hold down the key for 3 seconds to enter the pairing mode.
Open the default web browser
Open Windows explorer lThis
PC.
Play/ Pause
Previous track
Next track
Change backlighting effect
Backlighting brighter
Backlighting darker
Backlighting effect slower
Backlighting effect faster
Mute/Unmute
Sound volume increase
Sound volume decrease

Before You Begin.
Every device is different!
The operating instructions contain information on effective and reliable use.

Read the operating instructions carefully.
Keep the operating instructions and pass them on to other users when needed.

The CHERRY MX-LP 2.1 and 6.1 Compact Wireless keyboards are tri- mode (2.4G Wireless + Bluetooth 5.2 and Corded USB) keyboards for operating PCs and laptops and are developed especially for gaming.
For information on other products, downloads and much more, visit us at www .cherry-world.com or www.cherry.de

For Your Safety

Risk of choking from swallowing small parts
Keep the device out of the reach of children under 3 years.
Fire hazard due to permanently installed rechargeable battery
Do not destroy the keyboard by., e.g.. disassembling, crushing
heating, or burning it.
RSI stands for “Repetitive Strain Injury”.
RSI arises due to small movements continuously repeated over a long period of time. To avoid RSI, suggest that you:
Set up your workspace ergonomically.
.Position the keyboard and mouse in such a manner that your upper arms and wrists are outstretched to the sides of your body.
Take several short breaks, with stretching exercises if necessary.
Change your posture often.

Switching the Keyboard On/Off
To turn on the device

Connect the keyboard to the computer using the USB cable.
Power on the device using the l/0 switch on the back of the keyboard.
When powers on, all the key LEDs show white for 2 seconds.
turn off the device:
Disconnect the USB cable and power off the device using the l/0 switch on the back of the keyboard.
When not in use for longer than 30 seconds, the keyboard switches to sleep mode, which requires very little power. It switches on again automatically the first time any key is pressed.
Because the keyboard still consumes power in energy-saving mode, switch it off manually before longer periods out of use or for transport.

Connecting the Keyboard to a Device
You can connect the keyboard to your PC, laptop or other devices Such as a game console or TVJ via the cable, Bluetooth, or with the receiver using a 2.4 GHz wireless connection.
The Bluetooth connection is convenient if you wish to use the keyboard with several devices: you only need to connect once and do not need the receiver. You can also use Bluetooth to permanently connect up to 3 devices to the keyboard and switch between them.

Connecting the Keyboard via Cable

Connect the keyboard to your device using the USB cable
While holding down the fn key. press the Z key ( 1.
The LED on esc key glows orange if the battery is being charged.

Connecting the Keyboard via Bluetooth

Bluetooth 5.2 requires Windows 10 or Above Only use the keyboard with PCs or laptops with operating system Windows 10 or above or connect it with a cable.

As the keyboard has 3 Bluetooth channels, you can connect it to 3 different devices.

Turn the keyboard on.
Open the search for Bluetooth devices on the device you want to onnect to the keyboard Ifor example, on a Windows PC select Start Settings » Devices > Bluetooth).
Follow the instructions of the operating system.
Activate the Bluetooth connection of the keyboard by pressing the “Bluetooth” key I while holding down the fn key. The keyboard searches all 3 Bluetooth channels and try to connect your device.
If the connection is not successtul and there is an unused channel, the keyboard automatically enters pairing mode on that channel. The LED on the respective key flashes blue. The search sequence is from Channel 1 to Channel If there is an active channel (previously in usel, the search starts from that active channel, up to Channel 3 and then back to Channel 1.
In case all Bluetooth channels are used, you need to press and hold the fn key + the Bluetooth channel key I zi. je. ja for 3 seconds to start pairing with a new device. The previous pairing information on this channel is deleted.
Follow the instructions on the device which you want to connect to the keyboard. Look for keyboard name MX-LP x.1-BTx on your host device. Please complete the connection process within 30 seconds, otherwise, the search timer will expire. In this case, please re-initiate the pairing process on your keyboard Istep 4.
If the connection is successful, the key LED of the selected channel glows blue for 3 seconds.

Connecting the Keyboard via the Receiver

Turn the keyboard on.
Connect the receiver to a USB 2.0 port on your device
While holding down the fn key, press the “RF Wireless” key I:1.
The keyboard is connected to your host device [PC, Laptop, etc.] To view the connection status, press and hold the fn key. The respective key LED shows the active connection Icorded, RF Wireless or Bluetooth) in white and active Bluetooth Channel lonly when the Bluetooth connection is in use in Blue. In case of failed connection, the respective LEDS light up red.

Changing the Connection Type

If you have established a connection via cable, Bluetooth, and via the receiver, you can switch between the connection types using the fn key and the corresponding key.
Hold down the fn key and press the appropriate key as shown in the table

The LED of the selected key flashes white when the connection is being established. The LED returns to normal backlighting mode when the connection type is successfully changed.

Switching Bluetooth Device
If you have connected the keyboard to several devices le.g. PC. game console and TVI via the 3 Bluetooth channels, you can switch between these devices.

Switch to the Bluetooth connection.
Press the fn key and the Bluetooth channel key I . .)for the desired channel.
The keyboard is connected to the corresponding device via Bluetooth

Viewing the Connection Status
You can view the selected connection type and Bluetooth channel by pressing the fn key. The LED on Corresponding connection type key Z, X, C) lights up white. The LED on corresponding Bluetooth channel key 1Q, W, E lights up blue. If the selected connection is not active, the LED shows red. The lighting stays on as long as the fn key IS pressed.

Installing the CHERRY Gaming Software

To use the MX-LP 2.1 or 6.1 keyboard to its full potential, you need to install the CHERRY Gaming Software on your PC or laptop. With the CHERRY Gaming Software, you can change the backlighting mode, color, and speed, assign macros to the keys, and adjust parameters to control keyboard behaviors. Macros can be recorded and edited. The CHERRY Gaming Software is intuitive to operate and includes a help function. You can also contact our customer support if needed.

Always use the latest software.
Connect the keyboard via the cable.
Download the free software from: www.cherry-world.com or www.cherry.de.
Or: insert Press the CHERRY key combination I fn+ to open the web link which directs you to download the CHERRY Gaming Software.

Follow the instructions on the screen.

Running CHERRY Gaming Software
When CHERRY Gaming Software is installed, you can press CHERRY the key combination to launch the application.

Updating Firmware
If a newer version of the firmware is available, CHERRY Gaming Software will prompt to update your keyboard firmware. Updating the firmware to the latest version ensures the best performance of your keyboard.
Please plug in the wireless receiver to make sure its firmware is also updated to the latest version.

Updating keyboard firmware in cable mode To prevent faults due to an empty battery. please always connect the USB cable before updating the firmware.

Discovering Additional Functions

Your keyboard comes with many built-in functions, some of which are identified by symbols printed on the subline. To perform a desired function, press and hold the fn key and press the appropriate key. Please refer to the table below for details. Example: press [fn+ YI to pertorm the Print Screen lprt sc] function.

To keep the fn key in active [locked) state, press and hold the control key and then press the fn key. The fn key LED lights up red when the fn key is locked. Press fn + control again to unlock the fn key.

Using Gaming Mode
Your keyboard comes with a Gaming Mode. When playing games, you might want to disable the key to avoid unwanted interruptions.
Press and hold the fn key, and then press key to activate the Gaming Mode. The LED on H key lights up red. In Gaming Mode following keys or key combinations are disabled: alt + fn + F4, alt +tab, control+ alt + delete, control + esc. Press fn+ again to exit Gaming Mode.

Charging the Keyboard

When the battery of the keyboard is low, the LED on esc key flashes red and the backlighting is disabled. You should charge your keyboard soon.
Connect the keyboard using the USB cable to your PC or laptop.
The LED on esc key lights up orange indicating the charging is in progress.
The LED on esc key returns to normal backlighting when the keyboard is fully charged.
The charging circuit prevents overcharging.
The keyboard battery is charged as long ass the PC or laptop is switched on. You can continue working while charging. The cable,
Bluetooth or wireless connection selected is retained.

Resetting the Keyboard to Factory Defaults

Press and hold the fn key and esc key together for 5 seconds to reset the keyboard to its factory default settings. All LEDs on the keyboard light up white for 2 seconds to confirm the reset.
In rare scenarios that a hard reset is needed, you can insert a pin lor paper clip) into the small hole at the bottom of the keyboard and keep pressing for 3 seconds. In addition to restoring to factory defaults, Bluetooth pairing information is cleared.

Cleaning the Keyboard

Switch the keyboard off and disconnect the USB cable.
Clean the keyboard with a slightly damp cloth and some mild cleaning agent Isuch as dishwashing liquid). Do not use solvents such as benzene, alcohol, scouring agents or abrasive scourers.
Prevent any liquid from getting inside the keyboard.
NOTICE: Damage may occur due to using aggressive cleaning agents or letting liquid get into the keyboard.
Dry off the keyboard with a soft, lint-free cloth.

Troubleshooting Problems

When you are experiencing problems when using the keyboard, please try the following:
Switch the keyboard off and on again.
Use another USB port on your PC or laptop.
Make sure that the keyboard is not defective. Test it with another PC or laptop. Set the option “USB Keyboard Support” or “USB Legacy Mode” to “enabled” in the BIOS of the PC or laptop.
Charge the keyboard via the USB cable lsee 8 Charging the keyboard”)
Remove any objects causing interference between the keyboard and the PC or laptop.
Interference is caused in particular by metallic or electrical objects such as cables, loudspeakers, or USB hubs.
Reduce the distance between the devices and the PC or laptop.

Troubleshooting Bluetooth Connection Failures

If your PC or laptop is in sleep mode, it cannot be woken up using Bluetooth devices. Sitch on the PC or laptop manually.
Turn off any unnecessary Bluetooth devices.
Remove the connection to the keyboard in the Bluetooth software and add it again as a new device.
Some older versions of operating systems may not support Bluetooth 5.2. Use an external Bluetooth receiver.
lf you have assigned different Bluetooth channels: switch the Bluetooth channel if necessary lsee “4.1 Switching Bluetooth Device”
Should any interference be encountered when using USB 3.0 devices right near the receiver: Use another port that is farther away, use an additional cable, or a USB hub for the receiver or USB 3.0 device.

Troubleshooting RF Wireless Connection Failures

Connect the receiver to a UsB 2.0 port on your PC or laptop [this usually has a white or black guide). Malfunctions occasionally occur on USB 3.0 ports [blue guidel.
Connect the receiver to another USB 2.0 port on the PC or laptop.
Reduce the distance between the receiver and the keyboard by connecting the rece iver to a USB port that is close to the devices.
Use a USB extension cable to place the receiver as close to the keyboard as possible.
Use CHERRY Gaming Software to re-pair the receiver with the keyboard.

Technical Data

Certifications
EU Declaration of conformity
The company Cherry Europe GmbH, Auerbach/0Pf. Germany hereby declares that this radio system model conforms to the European guideline 2014/53/EU. The full text of the
EU declaration of conformity can be found under the following CE
Internet address: www.cherry.de/compliance.
Federal Communications Commission (FCC) Radio

Frequency Interference Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1 This device may not cause harmful interference, and 2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RF Exposure Statement
This device complies with the RF exposure requirements for mobile and fixed devices. However, the device shall be used in such a manner that the potential for human conta operation is minimized.
Copyfish
15.4 UKCA
UK Authorised Representative:
Authorized Representative Service
The Old Methodist Chapel
Great Hucklow
SK17 8RG
UK