FILA SW-41 Smart Watch User Manual

FILA SW-41 Smart Watch

Feature

• Health data

• Notifications

• Camera remote
  

• Steps

• Music Control
  

• Dream
  

• Direct call from the watch

• Not submersible
  

Thank You

Thank you for using our smart watch.
Important! The data provided by the smart watch, such as heart rate, blood oxygen and blood pressure, are merely indicative, it is not an exact medical measuring device.
Even if you are well, go to all the appointments scpointmenour doctor

Recommendations for people with sensitive skin during use of electronic wrist devices, Smartwatch and Smartcard.

The materials used for our Smartwatches and Smartcards are selected following a rigorous control of hypoallergenic measures, as well as guaranteeing that all materials comply with current regulations for materials in contact with the skin.
A small number of people, however, may experience some type of skin reaction.
If you suspect, or know, that you are allergic or have an above average sensitive skin type, you should monitor the use of these devices for any type of reaction due to said allergies, environmental factors or prolonged exposure to irritants, like soap, sweat, or other causes.
Smartwatches and Smart bands may contain materials such as nickel and acrylates which, even though they are within the permitted amounts in the manufacturing process, may cause skin to react if you are sensitive to them.
If you use these devices for a prolonged period of time, you may be more susceptible to developing skin sensitivities. To avoid possible skin irritations we recommend you do not expose the device to chemicals or use it if your skin has, or has been recently applied with, any of the products listed below:

• Insect repellents
• Moisturizing creams and lotions
• Oils
• Perfumes
• Antiseptic gels
• Soaps
• Sun protection creams

It is recommended that the devices are used when the skin is completely dry and free of any of the aforementioned products to avoid having charging contacts and measurement sensors in contact with wet skin. They are not submersible or waterproof.
Clean the device thoroughly to remove sweat after training and allow it to dry. Prolonged exposure to moisture can cause skin irritation.
It is also advisable not to wear these devices too tight or too loose.
If the strap is too tight, it may cause skin irritation. If the strap is too loose, change may occur.

The watch strap should be left so that it can move slightly back and forth on the wrist.
If you wear the device for prolonged periods of time, remove it to give your skin a rest. To avoid irritation, swap the device to your other wrist.
If you notice redness, swelling, itching or any other irritation, remove the Smartwatch immediately and consult your physician before using the device again.

Special attention must be paid to the use of these devices in places with relatively low humidity conditions.

When using the Smartwatch/Smartcard in places with low relative humidity (dry/poorly ventilated places, low humidity atmospheric conditions, dry indoors, if heating or air conditioning is always on, etc.), as with any other electronic device, it may be affected by charges of static electricity on rare but certain occasions. This may cause damage to the device and also to the person wearing it at that time. Static electricity is everywhere.
It surrounds us without us perceiving it.
An effective trick to avoid a high percentage of static electricity at home:

• Use a humidor. Humidity is a good conductor of electricity therefore, by maintaining an acceptable percentage of it, we will avoid static in areas of the home where we metal objects may be found. Small containers of water on top of radiators is another alternative solution.

The use of the devices in bed, whilst sleeping, is especially discouraged for children and the elderly due to the fact that repeated movements during the night may cause, through friction with sheets, blankets, etc. a swap the device to your other wrist.
If you notice redness, swelling, itching or any other irritation, remove the Smartwatch immediately and consult your physician before using the device again.
charge of static electricity. This may result in a sudden discharge of the watch’s battery and/or heating of same as the human body is a conductive element and can cause a reaction to people with sensitive skin, redness, irritation, etc.
If you notice redness, swelling, itching, or any other form of irritation, remove the Smartwatch immediately and consult your physician before using the device again in case you are suffering from any type of reaction, allergic or otherwise.

Welcome to use our high-performance wrist smart watch which creates thoughtful and health experience for you Device maintenance

Please remember the following tips when you maintain your smart watch:

• Clean the smart watch regularly, especially its inner side, and keep it dry.
• Adjust the smart watch tightness to ensure air circulation.
• Excessive skincare product should not be used for the wrist wearing the smart watch.
• Please cease wearing the smart watch in case of skin allergy or any discomfort.

Product Description And Charge

Before using the Smart Watch for the first time, perform a full charge, using the charging cable provided in this pack.
Connect the magnetic part of the charging cable to the back of the Smart Watch and the USB end of the charging cable, to a USB adapter (not provided in this pack) or to the USB port of the computer.

Downloading And Binding Of Smart Watch APP

Note: your mobile phone must support Android 4.4, iOS 8.0 or above, and Bluetooth 5.1

1. Download from Apple Store or Google play and install APP or scan QR code with mobile phone to download APP.
   
   APP / APK: FILA S-WATCH

2. Pairing smart watch with APP: Please do not pair the watch directly to your phone’s Bluetooth.

If you have already performed this operation, please remove it from the list of paired devices as it will prevent the connection to the APP.
If you have already performed this operation, please remove it from the list of paired devices as it will prevent the connection to the APP.

1. Open the APP

2. Update your personal details (gender, birth year, etc.) and press the check mark.
   Once done, grant all permissions requested by the APP.
   

3. To link the watch to your phone press “To Add”.

4. The phone will search, and display, SW-41 Select it to pair the watch to your phone.
   Once synchronization is complete your watch will display local date and time.

5. When you press the watch icon (bottom middle) you will see the following screen:
   
   Here you can set up notifications, alarms and the background image (can be personalized).
   In “Others” you can establish time format (12/24 hours), reminders, etc.

6. The last icon, on the lower right, will show “My” screen. Here you can complete the details of your profile and establish your objectives.
   

Notes:

• Only connect the device via APP and not via the Bluetooth setting of the smartphone.
• The personal data is used to calculate the calorie consumption and distance correctly.
• You can only connect one watch via APP. The use of multiple watches with one smartphone at the same time is not supported.
• After successful connection, the data, time and weather data are transferred from the smartphone to the watch.
• Time / date cannot be set manually.

Mobile Phone Connection (For calls)

If the app doesn’t ask if you want to link the watch audio to via Bluetooth, do the following:

• Connect the watch audio option: swipe down the main watch screen, access the control center and tap on the phone symbol to activate the Smart Watch audio for calls
• Enter the Bluetooth option of the Phone, search and connect the audio option for the device (SW-41 Audio)

Introduction To Call Function

When the watch is connected to the Smart Phone, you can use the Smart Watch to make calls, answer calls, and talk from the Smart Watch itself.
Note: When you use the call function, you must make sure that the watch is linked to the Smart Phone and with a stable connection.

Functions

Movement information

The Smart Watch records and displays the number of steps you walk during the day, calories burned, and distance traveled information.
The data records and the more detailed analysis of these data can be seen from the APP.

Sleep Monitor

For the Smart Watch to record the quality of sleep, it is necessary that you wear it.
The Smart Watch records and displays the total duration of sleep, as well as the quality of the sleep itself (deep, light or awake).
The data recording and the detailed analysis of these data can be seen from the APP

Heart Rate

The Smart Watch can measure and record the heart rate of 24h throughout the day.
Enter the “Heart Rate” interface to start measuring the current heart rate.

The data records and the more detailed analysis of these data can be seen from the APP.

Blood Pressure

Enter the interface of “Blood Pressure” to start measuring the current blood pressure.
The data records and the more detailed analysis of these data can be seen from the APP.

Blood Oxygen

Enter the interface of “Blood Oxygen” to start measuring the current blood oxygen.
The data records and the more detailed analysis of these data can be seen from the APP.

Weather Information

To see the weather, enter the interface of this function once you have linked the Smart Watch to the Smart Phone, this information will only be displayed when they are linked

Add Components

Swipe the screen to the left and in the last screen, tap on the plus sign, select the function icon to add it to the interface

Delete Components

Hover over the interface you want to delete and hold the screen, a minus sign will appear, press it to delete the component.

Features

BT calls from the watch / Different selectable sports modes / Heart rate / Blood pressure / Blood oxygen / Screen customization / Sleep control / Notifications / 220 mAh battery / Standby autonomy 30 days approx. / Autonomy in use 3 – 5 days approx. / Remote camera / Music control / Weather / 1.83 inch screen / BT 5.0 / Steps / Sedentary reminder / Drinking reminder / Not submersible / BT frequency band: 2.4 GHz / Maximum RF power emitted < 100 mW

Precaution

• The watch is not waterproof
• Do not expose the watch at extreme temperatures, the batteries could exploit.

Customer Service

Only in English, Spanish and Portuguese

Working hours: Mon to Thu from 08:00 to 14:00 and from 15:30 to 17:30 and Fri. from 09:00 to sac@innovacelular.com

Declaration of conformity

Hereby INNOVA CELULAR declares that the Smart Watch F41 (SW/41 (T18) complies with the essential requirements and any other applicable or enforceable provisions of Directives CE 2014/30/EU, 2014/53/EU and RoHS 2011/65/EU Annex II (EU) 2015/863.
To see the complete declaration of conformity you can access through the following link:
http://www.innovacelular.com/images/web/descargas/descargas/declaracion/declaracion_sw-41.pdf

NOTE: The Smart Smart Watch F41 (SW/41 (T48) has a 3-year warranty from the date of purchase. Special importance in the durability of the products have the elements that compose it and that suffer from degradation and loss of capacities due to their use, being understood as normal wear that they lose capacity, especially in the case of rechargeable batteries, depending largely on infinity of external factors (hours of use, charge and discharge cycles, use of inappropriate chargers, temperatures of use, not respecting the recommended charging times, etc…)
For the guarantee of wear and tear parts, it must be taken into account that the loss of autonomy of the battery as a result of its aging does not imply a manufacturing defect, so it is considered normal that after 6 months have a loss of 10%, at 15 months 20% – 30% at 24 months 45%, all corresponding to proper use of the battery and the charge and discharge cycles carried out.
Any battery that presents symptoms other than those listed in this manual, will be inspected by the technical service and assessed for its affectation to guarantee. If after 24 months from its purchase the battery presents symptoms different from those detailed, it will be understood to be exempt from guarantee for the reasons stated above and will be left out of the inspection process, becoming the customer who, if they so wish, must reliably demonstrate that the battery presented defects other than those detailed in this manual before those 24 months.

Safety Warnings

Important Safety Information: Handle the Smart Watch with care.
They contain sensitive electronic components, including batteries, and may malfunction, affect performance, or cause damage if dropped, burned, punctured, crushed, disassembled, or exposed to excessive heat, liquid, or high-pressure environments. concentrations of industrial chemicals, including nearly evaporated liquated gases such as helium.
Do not use the Smart Band if it is damaged.
Batteries: Do not try to replace the battery of the Smart Watch by yourself, as you could damage the Smart Watch and cause overheating and injury.
Charge: Charge the Smart Watch with the charging cable and a power adapter or a computer, charge the device only with an adapter that meets relevant national, international and regional safety standards.
Other adapters may not meet applicable safety standards and their use to charge the Smart Watch may present the risk of injury or death.
Using damaged cables or chargers, or charging the device if they are wet, may causer, electric shock, injury, or damage to the case or other belongings.
Prolonged exposure to heat: Avoid prolonged skin contact with the device, power adapter, charging cable and its connector, or the wireless

charger when connected to a power source, as this may cause discomfort or injury.
Choking hazard: The Smart Watch and the small parts included may present a choking hazard to small children or cause other injuries.
Always keep them out of the reach of children.
Interference with medical devices: The Smart Watch and charger contain components and radios that emit electro magnetics lads.
These electro magnetic lids and magnets that the device may contain may interfere with the operation of pacemakers, debar dilators, or other medical devices.
Keep a safe distance between the medical device and the Smart Watch.
Request specific information about the medical device from the manufacturer and your doctor. Stop using the Smart Watch if you suspect it is interfering with your pacemaker, deb rollator, or other medical device.
Skin irritations: The Smart Watch can cause skin irritation if not cleaned properly.
Regularly clean the Smart Watch with a soft, lint-free cloth.
In the event of any type of skin reaction, stop using the Smart Watch.
If the problem persists, see your doctor.
Electrostatic discharges: When using the Smart Watch in areas where the air is very dry, it is easy to accumulate static electricity, so you may feel a small electrostatic discharge from the Smart Band on your wrist.
To minimize this risk, avoid using the Smart Band in extremely dry environments, or touch a grounded, unpainted metal object before putting on the Smart Watch.
Important Driving Information: Discoloration of the connector and the bottom of the Smart Watch after continued use is considered normal.
Dirt, debris, and exposure to moisture could cause discoloration.

Customer Support

Guarantee

+34 91 713 94 98
INNOVA CELULAR SL
C/ Sivero Ochoa Nº 9 nave 8B
28521 Rivas-Vaciamadrid
Madrid

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>