Blonbar A13S Qi Bedside Lamp With Wireless Charger Instruction Manual

Blonbar A13S Qi Bedside Lamp With Wireless Charger

OVERVIEW

Function

• Direct luminescence LED surface light source combined with 48 PCS high-performance LED chips provides mellow and soft light.
• 3-grade brightness of the LED light can meet various lighting demands.
• The design of anti-glare provides an eye protection function.
• Low energy consumption and low attenuation
• Environment protection: the light source material does not contain Tungsten, Mercury, and other toxic metals.
• LCD screens can display clocks, calendars, and alarm clock.
• Long lifetime: 30000 hours.
• Wireless charging function

Product Usage

Wireless Charging Function:

• The indicator light will turn red while charging normally;
• The indicator light will turn green while the device is fully charged;
• The red light flashes when there is a problem with the wireless charger.

Time setting:

• Short press to switch between 12-hour and 24-hour mode.
• Long press the button for 2 seconds to enter time setting mode.
• Short press the button again to switch from Hour setting, Minute setting, and Exit (or wait for 5 seconds to automatically exit) During the setting mode, Press or to adjust the settings.

Alarm clock setting:

• Short press to open/close the alarm clock. Long press the button for 2 seconds to enter the alarm clock setting mode.
• Short press the button again to switch from the hour setting to and minute setting, and press or adjust the settings.
• Short press the button again to enter the snooze function setting mode, press or / can open/close the snooze function. Short press the button again to exit (or wait for 5 seconds to automatically exit)

In clock mode, a short press  can adjust the brightness of the display screen: brightest-medium-low-off
Wake-up light function: When the wake-up function is turned on, it will enter the wake-up light mode ten minutes before the set alarm clock time. The lamp lights up and the wake-up light icon begins to flash. The light gradually becomes brighter, when the alarm goes off, the light reaches the brightest state. In this mode, the wake-up light can be turned off by touching the metal pole, and the wake-up light icon keeps displaying.
Snooze function: When the alarm goes off, press , and the snooze icon will display. After ten minutes, the alarm will go off again. After three such operations, the function will be turned off. If no operation is performed, the alarm clock of this day will turn off automatically after the alarm continues for 10 minutes. Or in SNOOZE mode, long press  to turn off the alarm clock.

Product Parameter

Warranty Card

Applicable for

• Since the date of purchase, free service is guaranteed for one year under normal use. If beyond the warranty period, the cost of components will be charged.
• If the replaced components service are required, the cost will be charged according to our price list of spare parts maintenance.
• Under the following cases, the one-year free warranty service is not available.

1. Damage caused by non-normal use and natural disasters, such as earthquake and rat disaster.
2. Unauthorized maintenance, misuse, collision, negligence, abuse, accident, alteration, incorrect use of accessories that do not belong to the product.
3. Information in warranty card is not complete, such as purchase date and seller’s seal and chop are not included.
4. Special environment is not included in warranty scope, such as wet, sulphur areas, high salinity areas beside the sea, and corrosive areas.
5. Not following the instructions.
6. Special offer.
   • In order to avoid damage during transportation, please pack the products carefully when retuming for maintenance.
   • The manufacturer shall not be responsible for the breakdown of the product caused by customers’ dismounting.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>