blonbar AJ200B LED Flame Speaker Instruction Manual

blonbar AJ200B LED Flame Speaker

Product information

• Flame lamp
• Night light
• Wireless speaker function
• When using both two wireless speakers the left and right channels are separated to be on the box. Stereo output creates perfect sound.
  • Notice: When using a single wireless speaker, the left and right channels will be combined to output.)
• When charging, it shows a red light. The red light goes off, showing the lampbfully charged
• IP65 dustproof and waterproof

Technical Parameters

Flame Lamp mode

• Short press the light key “ : ” for the first time, and the flame light will turn on.
• Short press the light key “ : ” for the second time to turn on the night light, and long press the light key ” sO:” to adjust the brightness or darkness of the night light.
• Short press the light key “ . ” for the third time, the night light goes out, and the cycle repeats in sequence.

Wireless speaker mode

Single speaker use

• Long press ( ) button to turn on the speaker and with a beep. The indicator light flashes quickly, search the name AJ200 on the phone. After the connection is successful, the indicator light will be always on and accompanied with a beep.
• Long press button to switch to the previous short press to lower the volume.
• Long press the button to switch to the next song, and short press to increase the volume. When the volume reaches the maximum, there will be a beep.
• Short press the button to pause or resume playing.
• Press and button together to cancel the pairing.

Double speakers use

Two speakers pairing

• Long press (the button at the same time to turn on the two speakers. The indicator light of the two speakers will flicker.
• Double press the ( button of any speaker to enter the pairing. When the indicator light of one of the speakers changes from flashing to constant light and beeps, the two speakers are paired successfully.
• At this time, the two speakers are connected and form the left and right channels.
• Turn on the Bluetooth of the mobile phone, search for AJ200, and connect it.
• If one of the speakers has been connected to the mobile phone (the speaker indicator is always on), just double-press (the button of the connected speaker. Then wait for the two speakers to be connected.
• After the pairing is successful, the indicator light of another of the speakers changes from flashing to constant light and beeps.

Double Speaker Use

• When the matching of the case is successful, the connection method of the mobile phone is the same as that of the single speaker. Only one search name will be displayed on the phone. After the connection is successful, the sound will come out from both speakers at the same time.
• If only want to use a single speaker, press the and button to cancel the combination.
• If pairs are formed, long press the button of any one of the speakers, and both speakers will be turned off at the same time.

Tips:

• When the device button does not respond or freezes, please press and hold the power button ( for more than 8 seconds to reset.

How to connect two speakers? Please scan this QR code.

Charging instructions
Plug the TYPE-C cable into the USB port on the back of the speaker fot charging, the red light will be on when charging, and it will go out when fully charged.

If you have any questions or dissatisfaction about our products, please contact us via Amazon or email first: support@blonbarlamp.com How to connect two speakers? Please scan this QR code.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>