AUDIO ARRAY AM-C7 USB 2 in 1 Plug and Play Condenser Microphone Kit User Manual
- June 14, 2024
- AUDIO ARRAY
Table of Contents
AUDIO ARRAY AM-C7 USB 2 in 1 Plug and Play Condenser Microphone Kit
ACCESSORIES
-
Shock Mount
-
Pop Filter
-
Desk Clamp
-
USB Cable
-
Microphone
-
Boom Arm
INSTRUCTIONS
-
Indicator Light
The indicator light is blue when the mic is working. -
Volume Control Function
Turn left to turn down the volume, turn right to turn up the volume. -
Mule Function
Press the volume control knob to mute the microphone, meanwhile, the indicator light will turn red. -
Headphone Monitor Jack
Microphone supports zero latency monitor function.
SPECIFICATIONS
| Polar Pattern: | Cardioid |
|---|---|
| Input Sample Rate: | 96KHz |
| Bit Rate : | 24Bit |
| Frequency Response: | 20Hz-20KHz |
| Sensitivity : | -40dB±3dB (OdB=1 V/Pa, at 1KHz) |
| Output Impedance: | 2.2KΩ |
| Max. SPL: | 110dB |
| THD+N: | <1% |
| S/N Ratio: | 95dB |
| USB Cable Length : | 2m |
COMPUTER SETUP
Windows
Step 1: Plug the Microphone into your computer. The computer will automatically recognize the USB device and install a driver.
Step 2: Right-click on the sound icon on the system tray and select Sounds.
- Open Volume Mixer
- Spatial sound (Off)
- Playback devices
- Recording devices
- Sounds
- Troubleshoot sound problems
Step 3: Click the Recording tab and select the Audio Array AM-C7 Device and click on the Set Default button.
macOS
Step 1: Plug the Microphone into your computer. The computer will automatically recognize the USB device and install a driver.
Step 2: Open your System Preferences.
Step 3: Click sound to display the Sound preference pane.
Step 4: Click the Input tab and select the Audio Array AM-C7 Device as the device for sound input.
Customer Support
@audioarray.in
audioarray.in
@audioarray.in
/c/ AudioArray
@audio_array
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>