AUDIO ARRAY AM-C40 USB Plug and Play Condenser Microphone Kit User Manual
- June 14, 2024
- AUDIO ARRAY
Table of Contents
AM-C40
User Manual USB CONDENSER MICROPHONE
ACCECCORIES
INSTRUCTION
-
Indicator Light
The indicator light is white when the mic is working. -
Volume Control Function
Tur anti-clockwise to turn decrease volume, turn clockwise to increase the volume. -
Mute Function
Press the volume control knob to mute the microphone, meanwhile, the indicator light will turn red. -
Headphone Monitor Jack
Microphone supports zero latency monitor function.
SPECIFICATIONS
| Polar Pattern: | Cardioid |
|---|---|
| Input Sample Rate: | 96kHz |
| Bit Rate: | 24Bit |
| Frequency Response: | 20Hz-20kHz |
| Sensitivity: | -40d13±2dB (OdB=1V/Pa, at 1kHz) |
| Output Impedance: | 2.2k0 |
| Max. SPL: | 110dB |
| THD+N: | <1% |
| S/N Ratio: | 95dB |
| USB Cable Length: | 2m |
COMPUTER SETUP
Windows
Step 1: Plug the Microphone into your computer. The computer will
automatically recognize the USB device and install a driver
Step 2: Right-click on the sound icon on the system tray and select Sounds.
Open Volume Mixer
Spatial sound (Off)
Playback devices
Recording devices
Sounds
Troubleshoot sound problems Step 3: Click the Recording tab and select the
Audio Array AM-C40 Device andclick on the Set Default button.
macOS
Step 1: Plug the Microphone into your computer. The computer will
automatically recognize the USBdevice and install a driver Step 2: Open your
System Preferences. Step 3: Click sound to display the Sound preference pane.
Step 4: Click the Input tab and select the Audio Array AM-C40 Device as the
device for sound input.
support@audioarray.in
@audioarray.in
audioarray.in
@audioarray.in
/c/AudioArray
@audio_array