Audio Array AM-W13 Wireless Microphone Instruction Manual
- June 14, 2024
- AUDIO ARRAY
Table of Contents
AM-W13 INSTRUCTION MANUAL
WIRELESS MICROPHONE
ACCESSORIES
INSTRUCTIONS
-
Microphone head Section:
Including Microphone Cover Net and Microphone Cartiridge Module. -
Display Screen:
Display working channels, battery power, frequency. -
Switch button:
Press for 3 seconds on/off the microphone. -
Frequency adjust button.
-
POWER BUTTON
-
USB CHARGING PORT
-
SIGNALANTENNA
-
BATTERY INDICATOR
-
RF LIGHT
LIGHT INSTUCTION
Battery indicator®| Turns red and flashes quickly| The power of the receiver
is in a low battery status.
---|---|---
Stays on| The receiver is in charging model.
Turns off| The receiver is fully charged.
RF light 0| Flashes slowly| The receiver is not connected to the microphone.
Stays on| The receiver and microphone are successfully connected.
Flashes quickly| The receiver and microphone are successfully connected, and
the microphone is transmitting audio signals.
SPECIFICA
Type: Dynamic
Frequency Response: 50Hz-16KHz
Polar Pattern: Cardioid
Output Impedance: 6000
Sensitivity: -52dBt1.5dB
SIN Ratio: 96dB
Input Sample Rate: 48KHz
Bit Rate: 24bit
THD+N: 0.05%
NOTES
| When using this device, keep it away from water.
---|---
| Use the device in ventilated environment, keep it away from fire.
| Since it’s a wireless device, please keep it away from other I interfering
sources.
| Don’t take apart the device.
| Please use the standard power supply, high voltage may damage the device.
| Please place the used batteries into the recycle bin, don’t litter them.
support@audioarray.in
audioarray.in
/C/AudioArray
@audioarray.in
@audioarray.in
@ Caudio_array
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>