AUDIO ARRAY AM-C5 USB Plug and Play Conference Mic Instruction Manual
- June 14, 2024
- AUDIO ARRAY
Table of Contents
AUDIO ARRAY AM-C5 USB Plug and Play Conference Mic
ACCESSORIES
INSTRUCTIONS
- Connect the Type-A plug to the PC or laptop.
- Connect the Type-C plug to the microphone.
- The indicator light will shine blue which means the microphone is ready to work.
- If you want to mute the microphone just touch the “mic icon” on the microphone and the indicator light will turn to red. Touch again to start working.
| Polar Pattern: | Omni |
|---|---|
| Input Sample Rate: | 48KHz |
| Bit Rate: | 16Bit |
| Frequency Response : | 20Hz-20KHz |
| Sensitivity: | -38dB±3dB (0dB=1V/Pa, at 1KHz) |
| Output Impedance: | 2.2KO |
| Max . SPL : | 105dB |
| THD+N: | <1% |
| S/N Ratio : | 94dB |
| USB Cable Length: | 2m |
COMPUTER SETUP
Windows
Step 1: Plug the USB Audio Device into your computer. The computer will
automatically recognize the USB device and install a driver.
Step 2: Right-click on the sound icon on the system tray and select
Sounds.
Step 3: Click the Recording tab select the Audio Array AM-C5 Device and click on the Set Default button.
COMPUTER SETUP
macOS
- Step 1: Plug the Microphone into your computer. The computer will automatically recognize the USB device and install a driver
- Step 2: Open your System Preferences.
- Step 3: Click Sound to display the Sound preference pane.
- Step 4: Click the Input tab and select the Audio Array AM-C5 Device as the device for sound input.
- support@audioarray.in
- audio array.in
- /c/AudioArray
- audio array. in
- an audio array.in
- audio_array
Documents / Resources
|
AUDIO ARRAY AM-C5 USB Plug and Play Conference
Mic
[pdf] Instruction Manual
AM-C5 USB Plug and Play Conference Mic, AM-C5, USB Plug and Play Conference
Mic, Play Conference Mic, Conference Mic, Mic
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>