ALLMATIC AV10 Control Unit For Control Up To 4 Tubular Motors User Manual
- June 14, 2024
- ALLMATIC
Table of Contents
ALLMATIC AV10 Control Unit For Control Up To 4 Tubular Motors User Manual
PRODUCT VIEW
Overall dimensions: 140.50 x 182.00 x 80.60 mm
Dimensions of the mounting holes: 114.00 x 156.00 mm
INSTALLATION
- Connect the 230vac power supply as shown.
- If an engine operates in the wrong direction reverse the appropriate Black and Brown cables.
ATTENTION
- Connect all ground wires of tubular motors together with the ground.
- The maximum current absorbed for each output is 4 A.
WIRING FOR GROUP CONTROL
Master Keyswitch: Allows all connected motors to operate simultaneously.
ATTENTION
- The maximum total load allowed for group control is 6.3 A.
WIRING FOR INDIVIDUAL CONTROL
Individual Key switches: It allows the individual operation of the tubular motors through their corresponding selector.
ATTENTION
- Activate only one engine at a time.
PRODUCT DISPOSAL
This product is an integral part of automation, and therefore must be disposed of together with it. As with installation operations, even at the end of the life of this product, dismantling operations must be carried out by qualified personnel. This product consists of various types of materials: some can be recycled, others must be disposed of. Find out about the recycling or disposal systems required by the regulations in force in your territory for this category of product.
WARNING
-
Certain parts of the product may contain pollutants or dangerous substances which, if dispersed in the environment, could have harmful effects on the environment and human health.
As indicated by the symbol on the side, it is forbidden to throw this product into household waste. Then perform the “separate collection” for disposal, according to the methods provided by the regulations in force in your territory, or return the product to the seller when buying a new equivalent product. -
The regulations in force at local level may provide for heavy penalties in case of improper disposal of this product.
WARRANTY
The manufacturer’s warranty is valid from the date stamped on the product and
is limited to the repair or replacement free of charge of the parts recognized
by the same as defective due to lack of essential quality in the materials or
lack of processing.
The warranty does not cover damage or defects due to external agents,
maintenance deficiency, overload, natural wear, choice of incorrect type,
assembly error, or other causes not attributable to the manufacturer. Tampered
products will not be guaranteed or repaired. The data given are purely
indicative. No liability may be charged for reductions in scope or
malfunctions due to environmental interference. The liability of the
manufacturer for damage caused to anyone by accidents of any nature caused by
our defective products, are only those that derive from the Italian law.
Symbols
ALLMATIC S.r.l
32026 Borgo Valbelluna – Belluno – Italy
Via dell’Artigiano, n°1 – Z.A.
Tel. 0437 751175 – 751163 r.a. Fax 0437 751065
www.allmatic.com
E-mail: info@allmatic.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>