MUNBYN ITPP130B Bluetooth Thermal Label Printer User Manual

: June 14, 2024
: MUNBYN

Table of Contents

Product Introduction
- What’s in the package?
- Product features
Set Up The Printer
Pro Tips
FAQ
LED Status
Feeder Button Instruction
Specification
Safety Notices
FCC Statement
Tech Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MUNBYN ITPP130B Bluetooth Thermal Label Printer

MUNBYN ITPP130B Bluetooth Thermal Label Printer

Product Introduction

What’s in the package?

Ⓐ Printer
Ⓑ Flash Drive
Ⓒ USB Cable
Ⓓ Power Adapter
Ⓔ Power Cord
Ⓕ User Manual
Ⓖ Quick Tips
Ⓗ Labels

If contents are missing or damaged, please contact us.

Product features

Set Up The Printer

Recommend

Watch the short setup video at: www.bit.ly/unboxing130B

Quick printer connection

Please follow the sequence of the above picture to operate.

Label setup

Automatic label identification:

Load no less than 4 consecutive labels into the printer. Once the paper is stable, press and hold feeder button, until you hear a “beep”. Then, the printer will automatically label identification calibrate the label.

Bluetooth connection for Smart phone/Tablet

The printer is suitable for bluetooth of mobile phones and tablets, not compatible with bluetooth of computers, And the printer cannot be connected directly via the Bluetooth of the device, it needs to be connected using the Munbyn Print APP.

Connect the printer through the Munbyn Print APP

Search “Munbyn Print” on App Store or Google Play to get the App or scan the QR code below to download

Munbyn Print
Scan the QR code tutorial below to set it up
If your mobile needs a PIN password, please enter “0000”.

Note:
Due to the mobile phone system requirements, the app needs to access your location services information, you’ll get a notification requesting permission. You need to enable GPS and confirm authorization (Android only).

USB connection for Laptop/PC

Follow step (2.l Quick printer connection) to connect the computer and printer using the USB cable.
Download the printer driver from the following URL or insert the USB flash drive into your computer, and follow the steps (2.4.7-2.4.2) to complete the installation.

Note: For the latest driver, please visit: www.bit.ly/driverl30B

Windows Driver Installation

Downloaded software from the web address or insert the USB flash drive into your computer, open the driver installation package, Click on the .exe file for Windows computers, and follow the steps below to install

Mac Driver Installation

Downloaded software from the web address or insert the USB flash drive into the computer, open the driver installation package, click the .dmg file of the Mac computer, and follow the steps below to install

Mac Driver Installation

Pro Tips

Anytime you change your label, run the automatic label identification.
Press the feeder button on the printer to skip a blank label.
To run a self-test, press and hold the feeder button until you hear two short beeps.
To ensure your printing quality, please use MUNBYN labels. If you use other brands’ label paper, please run “automatic label identification” before printing.
Regularly clean the printer head.
If the paper is jammed and the red light flashes, run Automatic label identification.
Insert Munbyn into the same USB port on your computer every time.
This will avoid creating duplicate copies of the printer in your operating system.

FAQ

FAQ file, please visit: www.bit.ly/l30Bfaq2

LED Status

Light	Description	Troubleshoot
Blue	Normal operation
Green	Bluetooth connected
Flashing Red (every 2 seconds)	Label paper is not identified	Run automatic

label identification
Flashing Red (every 1 second)| Cover is not closed| Check that the cover is completely closed
Flashing Blue and Red| Printer head is overheated| Printer will automatically resume once the printer head has cooled down

Feeder Button Instruction

Printer status	Feeder button	Function
Printing	Press the button	Pause printing
Standby	Press and hold on until you hear one beep	Automatic label

identification
Standby| Press and hold on until you hear five beeps| Reset Printer

Specification

Method	Direct Thermal
Resolution	203 dpi
Max Printing Speed	lS0mm/s
Paper Width	40-110 mm (l.57-4.3inches)
Paper Thickness	0.06-0.25 mm
Power Adapter	24V /2.SA
Printing Life	TPHl00Km
Operating Environment	Temperature: 0 to 45 °C

Humidity, 10-90% (non condensing)
Storage Environment| Temperature: -10 to 50 °C Humidity: 10-80% (non condensing)
Connection| Bluetooth / USB
Weight| 1.76 lbs/0.Bkg
Dimensions| 182x99x87mm(L WH)

Safety Notices

The printer head can become very hot after printing labels. Do not touch the printer head.
Do not bend the power cord excessively or place objects on the cord.
Do not use the printer if you find any irregularities as these could result in fire or electrocution.
Keep the printer out of reach of children.
Use only approved accessories and do not try to disassemble, repair the unit by yourself.
Keep the printer away from water and other objects that could penetrate the components.
Please unplug the printer when it is not in use for long periods.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 75 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver iscon nected.
Consult the dealer or an experienced radio/TV technician for help
This device complies with part 75 of the FCC rules. Operation is subject to the following two

Tech Support

E-mail: support@munbyn.com
Whatsapp: +85 7 787 7881057
Phone: + 7 550 205 2250
Skype: munbyn
Support Time: Monday to Friday24 hours.

Support Time: Monday to Friday24 hours.
MUNBYN provides 24 months’ warranty and lifetime free service.
If you encounter any issues with the product, please contact the MUN BYN team to promptly receive troubleshooting tips or a replacement.

Website:www.munbyn.com

(how-to videos, warranty details)

|
---|---