HUANUO HNCM5 Single Monitor Stand Instruction Manual
- June 14, 2024
- HUANUO
Table of Contents
HUANUO HNCM5 Single Monitor Stand
Product Information
- Product Name: Desk Monitor Arm
- Model Number: HNCM5
- Manufacturer: Huanuo
- Contact Information: (US/CA) 1-800-556-0533, (UK) 44-808-196-3874, support@huanuo.com, www.huanuo.com
- Compatibility:
- VESA Pattern: 75 x 75mm (3 x 3) to 100 x 100mm (3.9 x 3.9)
- Monitor Weight: Less than 17.6 lbs (8 kg)
Product Usage Instructions
Step 1: Attach the Monitor Plate to the Monitor
- Select the appropriate monitor bolt (M4 x 12mm or M4 x 30mm) by hand threading them into the threaded inserts on the back of your monitor. Turn the bolts for a minimum of 4-5 turns into the threading without turning past the bottom of the hole.
- Option A: For Flat Back Monitor
- Attach the monitor plate to your monitor, making sure not to overtighten.
- Option B: For Curved Back Monitor
- Attach the monitor plate to your monitor, making sure not to overtighten.
Step 2: Install the Base
Select the appropriate combination according to your needs:
- Option A: Freestanding Base
- Option B: Grommet Base
If your desk does not have an existing grommet hole, make a mark on the desktop and use a drill to create a hole through the mounting surface. The desk thickness should be between 0.39 – 2.56 inches (10 – 65mm).
Step 3: Install the Cable Clip and Monitor Connector to the Support Pillar
- Slightly loosen the set screw on the monitor connector [02]. Slide the cable clip [05] and monitor connector [02] in sequence onto the support pillar [04].
- Ensure that the hanging tab on the monitor connector faces up.
- Secure the monitor connector [02] by tightening the set screw.
Step 4: Secure Monitor to the Stand Using Knob [B]
- Attach the monitor to the stand using the knob [B].
Step 5: Adjust the Tilt Angle of the TV
- The monitor should adjust easily when moved, then stay in place.
- If your monitor naturally tilts up or down, adjust the tilt tension bolt. If you do not intend to adjust the tilt, tighten the tilt tension bolt to prevent unwanted movement.
Step 6: Cable Management
- Use the cable clip to manage and organize cables.
Step 7: Rotation Restriction
- Ensure that the monitor is not extended behind the mount.
- Keep the monitor balanced to maintain the center of gravity of the base. Instability may cause tipping over. Store the Allen keys into the cable clip for easy access.
Features
- Compatible with VESA patterns 75 x 75mm (3 x 3) to 100 x 100mm (3.9 x 3.9)
- Supports monitors weighing less than 17.6 lbs (8 kg)
- Adjustable tilt angle
- Cable management system
- Rotation restriction for stability
Before Getting Started
Before getting started, make sure this mount is compatible
Contents
Installation Instructions
Step 1: Attach the Monitor Plate to the Monitor
Select Monitor Bolts
- Hand thread bolts into the threaded inserts on the back of your monitor to determine which bolt (M4 x 12mm or M4 x 30mm ) to use.
- A minimum of 4-5 turns into the threading is required. Do not turn past the bottom of the hole.
Attach the Monitor Plate to your Monitor
- Option A: For Flat Back Monitor
- Option B: For Curved Back Monitor
Step 2: Install the Base
Select the Combination According to Your Needs
-
Option A: Freestanding Base
-
Option B: Grommet Base
-
- NOTE: If your desk does not have an existing grommet hole, make a mark on the desktop, then use a drill to drill a hole through the mounting surface.
Step 3: Install the Cable Clip and Monitor Connector to the Support Pillar
- Slightly loosen the set screw on monitor connecter [02], then slide the cable clip [05] and monitor connecter [02] in sequence onto the support pillar [04].
Step 4: Secure Monitor to the Stand Using Knob [B]
Step 5: Adjust the Tilt Angle of the TV
- The monitor should adjust easily when moved, then stay in place. Adjust the tilt tension bolt if your monitor naturally tilts up or down.
- NOTE: If you do not intend to adjust the tilt for different viewing locations, you can tighten the tilt tension bolt to prevent unwanted movement.
Step 6: Cable Management
Step 7: Rotation Restriction
WARNING: Be careful not to extend the monitor behind the mount. Ensure that the monitor is balanced to maintain center of gravity of the base. Instability may cause the unit to tip over.
Features
WARNING: Ensure the monitor bolts and bolt securing the monitor to the mount are fully tightened before rotation.
Contact
- (US/CA) 1-800-556-0533
- (UK) 44-808-196-3874
- support@huanuo.com
- www.huanuo.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>