Tribit BTH71 Bluetooth Headphones with Mic User Manual

Tribit BTH71 Bluetooth Headphones with Mic User Manual

Package Contents

• 1x Wireless Headphones
  

• 1x Protective Case
  

• 1x USB Type-C Cable
  

• 1x 3.5mm Audio Cable
  

• 1x User Manual
  

Product Diagram

Turn on/off

1. To power on the headphones, press and hold the MFB button for 2 seconds. The LED indicator will flash blue for 1 second.
2. To power off the headphones, press and hold the MFB button for 4 seconds. The LED indicator will flash red for 1 second and then will turn off.

Bluetooth Connection

1. Press and hold the MFB button for 5 seconds until the LED indicator flashes blue. A moment later, the indicator will flash red and blue alternately to indicate that the headphones automatically enter pairing mode.
2. Activate the Bluetooth function of your phone to search for Bluetooth devices, then click the Tribit-BTH71 in the pairing list for connection.

Operation of Buttons

simultaneously for 1 second
Activate Siri| Press the MFB button twice
Clear the pairing list| Press the MFB button and “+” button simulta­neously for 4 seconds in the power-on state to clear the pairing list, then the headphones will enter pairing state automatically.

Voice Prompt

Specification

Charge the Headphones

Connect the USB Type-C Cable end of the provided charging cable to a 5V power outlet (power adapter is not included), and connect the Micro

USB end into the headphones. The LED indicator will glow red during the charging process, then change into green after being fully charged (within 3 hours).

Customer Service

The headphones have a full 18-month warranty against manufacturing defects starting from the purchase date. For FAQS and more information, please email to support@tribitaudio.com.

Warning

1. If the product is damaged, please stop using it
2. When the charging cable USB interface is hot, please replace it in time
3. Keep away from high temperature and fire source

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a partic- ular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equip- ment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Hereby, Thousandshores Deutschland GmbH declares that the radio equipment type Wire- less Headphones BTH71 is in compliance with Directive 2014/53/EU.

The full text of the EU declaration conformity is available at the following internet address: http://files.Tribit.com/BTH71-DOC-EN.pdf

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>