Tribit TR-KH02 Kids Bluetooth Headphones with RGB Lights User Manual
- June 14, 2024
- Tribit
Table of Contents
Tribit TR-KH02 Kids Bluetooth Headphones with RGB Lights
Package Content
-
l x Tri bit TR-KH02 Headphones
-
l x 3.5mm Audio Cable
-
3.5mm Audio Cable l x USB Type-C Cable
-
l x User Manual
Product Diagram
- Power Button
- LED Indicator
- Microphone
- 3.5mm Audio Input
- Type-C Charging Port
- Volume – / Previous Track
- MFB Button
- Volume + / Next Track
- Light Mode Switch Button
On/ Off
-
Power on:
Once you slide the Power button to the “ON” position, the colorful light will glow and the headphones will sound “power on” and then enter pairing state. -
Shutdown:
Once you slide the Power button to the “OFF” position, the headphones will sound “power off’ and then turn off.
Bluetooth Pairing
- In the power-on state, switch the button to the “ON” direction; the colorful lights are on; Bluetooth enters the pairing state, and the red and blue lights flash alternately.
- Turn on the Bluetooth of the mobile phone. Then find and select the “Tri bit Starlet 02” Bluetooth pairing name in the device list for Bluetooth pairing connection.
Light Mode Switching
In power-on state, the colorful light of the headphones will auto light up. Each short pressing can switch among 3 lighting modes. When short pressing the Power button for the fourth time, the colorful light will turn.
Operation of Buttons
| Volume Up | Short press the”+” button. |
|---|---|
| Volume Down | Short press the”-” button. |
| Next Track | Press and hold “+” button for ls. |
| Previous Track | Press and hold “-” button for ls. |
| Play/ Pause | Press the MFB button once. |
| Answer/ End A Call | Press the MFB button once. |
| Reject A Call | Press and hold MFB button for ls. |
| Activate Siri | Press the MFB button twice. |
| Clear the Pairing List | In the power-on (connected) state or pairing state, |
you can press and hold “+” and “-” buttons simultaneously for 5s to clear the
pairing list and enable the headphones to enter pairing state (the indicator
light will flash red twice and blue twice, and then repeat the lighting mode
all the time).
Power On| Power On
Power Off| Power Off
Pairing| Pairing
Successful Pairing| Connected
Disconnection| Disconnected
Low Power| Battery Low
How to Charge the Headphone
To charge the headphones, please connect one end of the USB-C charging cable to a 5V power adapter (not included) and the other end of charging cable to the headphones. The headphones and their colorful light will automatically turn off. The red indicator will glow sturdily during charging process and will change to blue color after the headphones are fully charged.
Warning
- If the product is damaged, please stop using it
- When the charging cable USB interface is hot, please replace it in time
- Keep away from high temperature and fire source
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions
(1 ) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Hereby, Thousand shores Deutschland GmbH declares that the radio equipment
type Wireless Headphones TR-KH02 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration conformity is available at the following
internet address: http://files.tribit.com/TR-KH02-EN.pdf
Learn more about the UK Declaration of Conformity, Please click below link to
download. http://files.tribit.com/TR-KH02-UK.pdf
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>