ZEBRONICS ZEB BT6593RUCF Wireless Bluetooth Multimedia Speaker User Manual

ZEBRONICS ZEB BT6593RUCF Wireless Bluetooth Multimedia Speaker

Thank you for purchasing the ZEB-BT6593RUCF 5.1 Speaker. Please read this user manual carefully and keep it for future reference.

Warning

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

• To prevent fire or electric shock do not expose the unit to rain or moisture.

Note: This product is for indoor use only.

• Refer servicing to qualified personnel only.

The lightning flash with arrowhead symbol, within and equilateral triangle, is intended to alert the user of the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the manual accompanying the product.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions before using the product.
2. Read all the warnings carefully.
3. Follow all instructions carefully.
4. Do not use this unit near water.
5. Clean only with dry cloth.
6. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
7. Do not install the speaker system near any heat sources such as radiators, heat registers, stoves, or other unit (including amplifiers) that produce heat.
8. Protect the power cord from being waled on or pinched particularly at plug points and the point where they exit from the unit.
9. Only use attachments/accessories specified by the manufacturer.
10. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the unit. When a cart is used, be cautious while moving the cart/unit combination to avoid injury from tip-over.
11. Unplug this unit during lightning storms or when unused for long period of time. Refer all servicing to qualified service personal. Servicing is required when the unit has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the unit, the unit has been exposed in rain or moisture, does not operate normally, or has been dropped.

Package Contents

• Subwoofer : 1 U
• Satellite : 1 U
• Remote control : 1 U
• Input cable (RCA – RCA ) : 1 U
• Antenna cable : 1 U
• Wall mount fasteners : 1 U
• Stereo to RCA adapter : 1 U

How to use the BT:

1. select the audio input to BT mode
2. Search BT device with the name “ZEB-BT6593RUCF”
3. connect the BT
4. if your BT device is below the 5.0 version, input password “0000” when connecting.

Product Representation

Front Panel

INPUT : Input Mode BT v5.0/USB/FM/AUX/AC-3 5.1/2.1 : 5.1/2.1 function key.

STANDBY / / AUTO : Stand by function by pressing it 3 secs in BTv5.0/USB/FM/AUX/AC-3 Mode; Play/Pause in BT/USB mode; Automatic FM radio search by pressing 3 secs.

VOL- / / CH- : Turn down the volume; Previous track in USB/BT Mode; Previous saved channel in FM mode.

VOL+ / / CH+ : Turn up the volume; Next track in USB/BT mode; Next saved channel in FM mode. U DISK : USB port.

Mic1 & Mic2 : Mic 1/2 Port

Important Notes

• Make sure that the power supply is proper and never handle the power cord or its plug with wet hands when plugging into, or unplugging from an plug-point.
• Ensure that the main power switch is in the “OFF” position before connection the AC power cord to the power supply to avoid damage to the unit.
• A damaged power cord can easily cause an electric shock or fire; Never use a power cord after it has been damaged.

Battery Installation

Remote Control

• USB USB input
• FM FM Radio
• AUX AUX Input
• BT BT Input
• DVD AC-3 input for 5.1 mode audio source.
• EQ Equalizer preset
• Play & pause
• Previous track when USB/BT Input
• CH- Previous Channel When FM Input
• Next track when USB/BT Input
• CH+ Next Channel When FM Input
• VOL -/+ Master Volume
• DISP -/+ Lightness Adjust
• REPEAT Repeat Mode
• TUNE -/+ Previous/Next  Channel Keep Pressing tosearch the channel
• AUTO Press and Hold for 2-3 sec to begin FM auto scan
• SAVE Save FM Channel
• RESET When the Volume is at The Maximum, Press “RESET” Button at The Status While Power On
• MUTE Mute
• 5.1/2.1 5.1/2.1 mode.
• SW -/+ To calibrate the woofer sound level.
• FL -/+ To calibrate the front left speaker level.
• FR -/+ To calibrate the front right speaker level.
• CEN -/+ To calibrate the center level.
• SL -/+ To calibrate the surround left levels.
• SR -/+ To calibrate the surround right sound levels.
• SLEEP -/+ Time choice 0/10/20/30/45/60/90/120.

Input connectivity

Note: Insert the plugs fully into the jacks. Loose connections may produce noise interference.

Output connectivity

SPEAKER TERMINALS

Connect front speakers, center speaker, surround speakers to 5.1 speaker output terminals.

• The front speaker’s cords to the FRONT SPEAKERS terminals
• The center speaker’s cords to the CENTER SPEAKERS terminals
• The surround speaker’s cords to the SURROUND SPEAKER terminals

Note: Do not leave objects generating magnetism near the speakers.

Unit Operation

• First plug the cable of all the satellite into the output jack on the rear panel of the woofer, one end of the audio cord into the input jack on the rear panel, the other end into the output jack of the computer or any external audio source, the power cord into the power plug socket. Then switch on the unit, the LED will be in the blinking state in the front panel, when the standby button is being pressed the unit lights up.
• Pressing the VOL + and VOL – keys will enable the volume levels to be increased & decreased.
• When the 5.1/2.1 button is pressed, it plays back the track from stereo to 5.1 channel in all modes which is indicated through the blue led for the selected mode.
• When in FM mode, press and hold PLAY/PAUSE button in the front panel of the woofer or the AUTO button in the remote for 2-3 seconds the automatic scanning will be proceeded and once after scanning it will playback the first channel of the full scan done.
• When inserted a USB, it will play from the device last inserted, the input mode will be changed to USB on the display and starts playing from the beginning or auto resumed from the track of the last time playback.
• When a USB drive is working, press the PLAY/PAUSE button to pause the music, and press the PLAY/PAUSE button again to resume music.
• When a USB drive is playing, press the MODE button to cycle through the LINE IN, USB, FM, and BT modes.
• When a USB drive is working, press the PREVIOUS and NEXT buttons to choose the previous or the next audio track.
• After stopping using the unit, Use the standby button to turn off the unit, switch off the power switch, and unplug the power cord.

Specification

Output power (RMS)

• Subwoofer: 35 Watts
  Satellites: 12 Watts x 5
  Total: 95 watts

Driver size

• Subwoofer: 13.33cm
• Satellites : 7.62cm x 5

Impedance

• Subwoofer: 4Ω
• Satellite: 4Ω
• Frequency response : 40Hz – 20kHz
• S/N Ratio : ≥75dB
• Separation : ≥50dB
• File format support: MP3/WMA/WAV/FLAC

(USB) /APE

• Line input: 2ch RCA, AC-3

Max. supported

• USB memory size : 128GB

FM frequency

• scan range : 87.5MHz-108MHz
• BT name: ZEB-BT6593RUCF
• BT version : 5.0 + EDR

Product dimension (W x D x H)

• Subwoofer : 165 X 295 X 310 mm
  Satellite : 95 x 98 x 150 mm

Net. weight

• Subwoofer : 4.71kg
• Satellite : 0.386kg x 5
• Total : 6.6kg

Features

5.1 Channel Speaker  BT v5.0/USB/FM/AUX/AC-3 LED display 13.33cm subwoofer Remote control Wall Mountable Dual Microphone input Jack Volume/Bass/treble Control ISO 9001:2015 Certified Company www.zebronics.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>