Blukar K9702 Selfie Stick User Guide

June 14, 2024
Blukar

Blukar K9702 Selfie Stick

Blukar-K9702-Selfie-Stick-PRODUCT

Welcome
Thank you for purchasing Blukar Selfie Stick. Please read this manual carefully, it will help you set up and operate this product correctly. It is recommended you keep the manual for future reference. If you need any other help, please contact our customer support team or send an email to support@blu- kartech.com.

Features

  1. Extended length: 74cm
  2. Collapsed length: 19cm
  3. Adjustable angle: 360°
  4. Bluetooth connection distance: 10m
  5. The remote control battery can be replaced (the battery model is CR1632)

Instructions

  1. Press and hold for about 3s to turn on the remote control, and the LED indicator will flash.
  2. Turn on Bluetooth on the phone setting, search “Blukar Selfie” from the Bluetooth list, and match. The LED indicator will go out after pairing with the mobile phone.Blukar-K9702-Selfie-Stick-FIG-1 \(1\)
  3. Open the selfie stick, put the phone in, and adjust it to a suitable angle (If you need to shoot vertically, please rotate the clamp left and right)
  4. Press the remote control button to take photos remotely.
  5. Long press the remote control for 3 seconds to shut down.

Remote Control

Take out and load the remote controlBlukar-K9702-Selfie-Stick-FIG-1
\(2\)

How to replace the battery

Tripod mode

Put your finger into the hole at the bottom of the selfie stick to open it (Please pull out the last section of the pole and adjust it to be stable in tripod mode)Blukar-K9702-Selfie-Stick-FIG-1 \(4\)

Replace the camera dock

  1. Unscrew the screw here.
  2. Take out the clip part of the selfie stick.
  3. Align the base into the groove.
  4. Retighten the screws.Blukar-K9702-Selfie-Stick-FIG-1 \(5\)

Tips

  1. The selfie stick is compatible with Android 4,3 and iOS 5.1 and above.
  2. In order for the selfie stick to work well, please set the volume button to the shutter button in the camera function settings for Android devices.
  3. If there is no Bluetooth connection within 3 minutes in the power-on state, the remote control will turn off automatically. If there is no operation within 10 minutes in the Bluetooth-connected state, the remote control will turn off automatically.

Precautions

  1. Please do not disassemble this product by yourself.
  2. Please keep your selfie stick away from water, fire, flammable gas, and corrosive liquids.
  3. To avoid the danger of suffocation, please keep plastic bags away from babies and children.

ISED Statement

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. this device may not cause interference, and
  2. this device must accept any interference, including interference that may cause undesired operation of the device.

The product complies with the Canada portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such a function is available.

CONTACT

  • TEL: 1-800-360-5881
  • EMAIL: support@blukartech.com.
  • WEBSITE: www.blukartech.com.
  • ©Shenzhen Teng Xun Zhan Yi Technology
  • Co., Ltd. All rights reserved.
  • Product Name: Selfie Stick
  • Model: K9702
  • IC: 28999-K9702
  • Manufacturer: Shenzhen Teng Xun Zhan Yi
  • Technology Co., Ltd.
  • Manufacturer Address: Room 302, Building 8,
  • Yunli Intelligent Park, Fada Road, Bantian
  • Street, Longgang District, Shenzhen,
  • Guangdong, China
  • www.blukartech.com.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals