arsvita US1ASCA0076 Bluetooth Car Cassette Tape Adaptor Instructions

arsvita US1ASCA0076 Bluetooth Car Cassette Tape Adaptor Instructions

How to use it

1. The adapter is equipped with a stereo two-channel audio transmitter head, it can effectively improve the playback quality.
2. When the mobile phone calls, you can press the remote control button to answer the car hands-free voice function and drive the car safely! When you need to pause and play music, you can also press the remote control button.

Bluetooth connection and how to turn on

1. For the first time, press and hold the remote control button for 3 seconds. The blue light flashes to indicate that it is turned on, and then turn on the Bluetooth function of the mobile phone to search for the ZHX-088, then connect it.
2. When the adapter is connected,for the second time, the Bluetooth signal is turned on and then the Bluetooth tape adapter is turned on to automatically connect itself.

How to turn off

1. Press and hold the remote control button for 3 seconds and the red light flashes to shut down.
2. Automatically shut down when the Bluetooth signal of the mobile phone is within 10 meters of the adapter and within 10 minutes.

Charging and usage time instructions

1. The Bluetooth cassette adapter has a Micro USB charging cable. The charging port on the Bluetooth tape adapter is connected to the Micro USB charging cable. The other USB port is connected to the 5V 1A home phone charger or the car phone charger. It is charging when you see red light.
2. When the adapter is charging, the red light turns blue to indicate that the charge is full. Fully charged can make 7-8 hours of continuous use or work!

Note: When the Bluetooth tape adapter is turned on normally, you have to open the car recorder head,then you can turn on the phone music to enjoy the music.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>