Blukar K9102 Bike Lights Set Rechargeable Super Bright Bicycle Lights User Guide
- June 13, 2024
- Blukar
Table of Contents
Blukar
User Guide
Model: K9102
Welcome
Thank you for purchasing this Blukar product.
In order to ensure the best performance and safety, please read this user
manual carefully and save it for future reference.
If you need any other help, please contact our customer support team or email
us to support@blukartech.com
Bicycle Headlight
Product Profile
1. K1 Button | 4. LED Lights |
---|---|
2. K2 Button | 5. Power Indicator |
3. P8 Lamp | 6. US8 Charging Port |
7. Fixing Strap |
Specification
Lamp Bead Types | P8 + LED | Charging Input | 5V/1.2A |
---|---|---|---|
Battery | 2400mAh | USB Output | 5V/1A |
Dimension | 105.2x48x29.4 mm |
Lighting Modes
Left headlight on Press the K1 button once
Right headlight on: Press the K1 button twice
Both headlights on at the same time: Press the Kl button three times
Press the KI button four times to turn the light off
Top LED fully bright. Press the K2 button once
Top LED half bright. Press the K2 button twice
Top LED flashing: Press the K2 button three times
Press the K2 button four times to turn the light off
Bicycle Taillight
Product Profile
Switch Button | Power Indicator |
---|---|
COB Lamp Beads | US8 Charging Port |
Fixing Strap |
Specification
Lamp Bead Types: COB
Battery: 400mAh
Dimension: 71×30.5×23.5 mm
Operating Instructions
- Press the switch button briefly to turn the light on/off and adjust the light mode.
- Adjust the lighting modes: Strong red light – Low red light – Red fast flashing – Red Strobe.
Installation Steps
- Push the headlight into the fixing strap slot in the direction shown in the diagram to complete the headlight installation.
- Attach the light to the handlebars of the bike with the strap.
- Fasten the other side of the strap on the lamp hook.
Tip: Both the headlight and taillight strap positions can be rotated 360° to adjust the orientation.
How to Charge
- Connect the USB cable to the USB input port of the bicycle light
- Plug the other end of the cable into a wall outlet or computer USB port
- Blue indicator light flashes when the headlight is charging and indicates the remaining power, when fully charged, the 4 indicators are always on
- The red indicator light comes on when the taillight is charging and goes off when fully charged
Caution
Do not look directly into the light source to avoid eye irritation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>