Blukar K9121 Rechargeable LED Headlamp User Guide
- June 13, 2024
- Blukar
Table of Contents
Blukar K9121 Rechargeable LED Headlamp User Guide
Welcome
Thank you for purchasing this Blukar product. To ensure optimum performance and safety, please read this user manual carefully and keep it for future reference. If you need any additional assistance, please contact our customer support team or email us at support@blukartech.com.
package Contents
- 1xLED Headlamp
- 1xUSB Charging Cable
- 1xHeadband
- User Manual
Specification
Material | ABS/PC/TPR |
---|---|
Lighting Modes | 7 Modes |
Battery | 1200 mAh |
Input | 5V |
Adjustment Angle | 45 |
Structure Diagram
- Sensor Button
- Switch Button
- Headband
- Headlamp
- Angle Adjustment Plate
- USB Charging Port
- Sensing Area
- Sensor Indicator
On/Off Mode
- Press the switch button to turn the light on/off and adjust the light mode (Weak White Light – Strong White Light – Red Light).
- Long press on the sensor button: red light flashes
- In any mode, long press on the switch button to turn off the light.
Sensor Mode
- Short press the sensor button to turn on the sense mode, the blue indicator lights up and enters the weak white light mode. (Press the sensor button again to exit sensor mode)
- Then press the switch button briefly to switch the light mode. Press the switch briefly for the first time: strong white light Press the key a second time: Red light Press the key a third time: Off
Note: Waving your hand within 15 CM in front of the headlamp to turn on/off the light in sensor mode.
Charging
Charging: Red Light Fully charged: Green Light
- Please make sure the product is fully charged when you use it for the first time.
- Please use the supplied or certified USB cable to charge. When fully
charged, please close the dust cover to protect the charging port.
Precautions
- Do not use the product while charging.
- It is not recommended to leave the product in an uncharged state. If not used for a long period of time, charge the headlamp at least once every 2 months.
- Do not overload the circuit while charging, as this may cause electric shock or fire.
- Do not use this product in extremely hot or cold environments. 5. Keep it away from water, fire, flammable gas and corrosive liquid.
- Do not look directly into the light source to avoid eye irritation.
- Do not disassemble and replace the internal parts of the lamp by yourself to avoid damaging the products.
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
- Children should use this product under the supervision and guidance of adults.
Blukar
- TEL: 1-800-360-5881
- EMAIL: support@blukartech.com
- WEBSITE: www.blukartech.com O Shenzhen Teng Xun Zhan Yi Technology Co., Ltd. All rights reserved.
- Product Name : LED Headlamp
- Model: K9121 Manufacturer: Shenzhen Teng Xun Zhan Yi Technology Co., Ltd.
- Manufacturer Address: Room 302, Building 8, Yunli Intelligent Park, Fada Road, Bantian Street, Longgang District, Shenzhen, Guangdong, China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>